CSU, Sacramento
6000 J Street, Sacramento, CA 95819, USA
Working Title: Maintenance Mechanic Classification Title: Facilities Maintenance Mechanic Posting Details Priority Application Deadline (Posting will remain open until filled): Monday, March 25, 2024 @ 11:55pm PST Hiring Preference Not Applicable Position Summary Under general supervision, the Maintenance Mechanic is responsible for the full range of journey-level hardscape work and general facility work. The incumbent will perform a variety of maintenance and construction work on facilities systems, equipment, structures, and fixtures. FLSA : Non-exempt (eligible for overtime compensation under FLSA). Position is benefits-eligible. Anticipated Hiring Range : $6,076 per month - $6,630 per month; commensurate with candidate's education, experience, skills, and training. CSU Classification Salary Range : $5,787.00 - $7,396.00 per month Salary Grade/Range : 1 Recruitment Type : Regular (Probationary) Time Base : Full-Time Pay Plan : 12 month Work Hours : Monday - Friday, 6:00a.m. - 2:30p.m. Overtime may be required on the weekends and evenings . Hours may vary depending on operational needs. Position works on-site. Department Information Facilities Management is the steward for the university buildings, infrastructure, grounds and landscape. We perform maintenance and renovation to facilities, plan and manage new building construction and support the Redefine the Possible initiative through our commitment to building a welcoming campus and by creating a dynamic physical environment for students, faculty, staff, and the community. Facilities Management takes pride in being the stewards of Sacramento State Campus capital assets and invites you to join the dynamic team! Please visit our website for additional information https://www.csus.edu/administration-business-affairs/facilities-management/ Minimum Qualifications Knowledge: Work requires thorough knowledge of the methods, materials, equipment and tools used in one skilled trade area; working knowledge of materials, methods, equipment and tools in related trade areas pertaining to facilities, systems, construction and renovation; thorough knowledge of generally accepted trade practices in trade specialty; working knowledge of computerized maintenance and building automation systems; working knowledge of applicable building and safety codes and regulations related to facilities, systems and renovations. Abilities: Must be able to demonstrate journey-level skill in one trade and strong skills in other applicable trades; operate construction and related equipment; use considerable judgment and discretion in performing duties; read, interpret and work from blueprints, plans, drawings, and specifications; make rough sketches; estimate cost, time and materials of maintenance, repair and renovation work; maintain records and retrieve data related to work performed using manual and/or computerized record-keeping systems; prepare standard reports; provide instruction to unskilled and semi-skilled assistants; analyze and respond to emergency situations; read and write at a level appropriate to the position; and perform arithmetic calculations as required by the position. Experience: These abilities normally would be acquired through four years of increasingly responsible experience leading to journey-level skills in a mechanical or facilities/building trade, or any equivalent combination of training and experience as a facilities and systems mechanic which demonstrates the achievement of journey-level skills equivalent to that acquired through completion of an applicable apprenticeship program. Required Qualifications Demonstrated expertise in areas of construction/maintenance Demonstrated knowledge of applicable building and safety codes and regulations related to concrete/hardscape trade and general construction related to facilities systems and renovations Good communications and interpersonal skills, with the ability to provide excellent customer service in a diverse working environment Ability to work professionally, cooperatively, and safely with a variety of customers and environments Ability to safely perform the physical requirements of the position, including the ability to safely move a minimum of 50 pounds, in a variety of work environments (i.e. confined spaces, around mechanical devices etc.) Ability to use standard office equipment (e.g. desktop computer), standard office software (e.g. Microsoft Office Suite, Adobe Acrobat Reader), and the internet Completion of an apprenticeship program or experience equivalent leading to a journey-level concrete/hardscape tradesman Four or more years journey-level experience in the operation, maintenance, and repair of concrete/hardscape systems Have certification or willing to become asbestos abatement certified Experience using computerized maintenance management systems Commitment to maintaining a welcoming and inclusive work environment with diverse colleagues and constituents including faculty, students, staff, and members of the community. Other Requirements Possession of a valid driver’s license and maintenance of a good driving record. Conditions of Employment Ability to pass a background check. Preferred Qualifications 12. Knowledge and experience in concrete, asphalt, and hardscape installation and repair 13. Ability to operate heavy equipment 14. Knowledge of ADA access requirements Required Licenses/Certifications CA Drivers License/ Clean Driving Record Documents Needed to Apply Resume and cover letter. Failure upload required documents to the online application may result in disqualification. Three professional references are required as part of the online application. About Sac State Sacramento State is located in the heart of California’s capital city, five miles from State Capitol. The lush, 300-acre campus is situated along the American River, close to numerous bike trails and other recreational areas. Sacramento, also known as the “Farm-to-Fork Capital,” is one of the most ethnically diverse and livable cities in the country, with a population of half of a million. Sacramento State’s 31,000 students come not only from the Greater Sacramento Region, but also from across the state, country, and world. Our 1800 faculty and 1,500 staff are committed to meeting our mission: “ As California’s capital university, we transform lives by preparing students for leadership, service, and success. Sacramento State will be a recognized leader in education, innovation, and engagement. ” As the regional hub of higher education, Sac State is dedicated to student success , diversity, equity and inclusion , community engagement , philanthropy , and campus safety . As evidenced by the values embedded in our Hornet Honor Code , Sacramento State is committed to creating an inclusive environment where all faculty, staff, students, and guests are welcome and valued. Our commitment is more than simply ensuring that our campus is free from bias and discrimination, but is one devoted to celebrating many diverse identities, life experiences, and perspectives that enrich our community, teaching and learning. To learn more about why you should join the Hornet Family, please visit the Why Sac State ? page. Background Check Disclaimer A background check (including a criminal records check) must be completed satisfactorily before any candidate can be offered a position with California State University, Sacramento. Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current California State University, Sacramento employees who apply for the position. One variation of background check required could be a LiveScan screening, which involves submitting fingerprints at a certified LiveScan Service Center. COVID-19 Vaccine Certification Information: CSU requires faculty, staff, and students who are accessing campus facilities to be immunized against COVID-19 or declare a medical or religious exemption from doing so. Any candidates advanced in a currently open search process should be prepared to comply with this requirement. The systemwide policy can be found at https://calstate.policystat.com/policy/9779821/latest/ and questions may be sent to hr-empservices@csus.edu Out of State Employment Policy Sacramento State University, as part of the CSU system, is a State of California Employer. As such, the University requires all employees (up)on date of hire to reside in the State of California. As of January 1, 2022 the CSU Out-of-State Employment Policy prohibits the hiring of employees to perform CSU-related work outside the state of California. Equal Employment Opportunity California State University, Sacramento is an Affirmative Action/Equal Opportunity Employer and has a strong institutional commitment to the principle of diversity in all areas. We consider qualified applicants for employment without regard to race, color, religion, national origin, age, sex, gender identity/expression, sexual orientation, pregnancy, genetic information, medical condition, marital status, veteran status, or disability. Sacramento State hires only those individuals who are lawfully authorized to accept employment in the United States. It is the policy of California State University, Sacramento to provide reasonable accommodations for qualified persons with disabilities who are employees or applicants for employment. If you need a disability related reasonable accommodation as part of the application and/or interviewing process, visit https://www.csus.edu/administration-business-affairs/internal/your-hr/benefits/reasonable-accomodation.html . The University is committed to creating an education and working environment free from discrimination, sexual harassment, sexual violence, domestic violence, dating violence, and stalking. For more information on mandatory training for new employees, visit https://www.csus.edu/compliance/hr-compliance/mandatory-dhr-training.html . Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act and Campus Fire Safety Right-To-know Act Notification : Pursuant to the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act, the current Annual Security Report (ASR) is available for viewing at https://www.csus.edu/clery . The ASR contains the current security and safety-related policy statements, emergency preparedness and evacuation information, crime prevention and sexual assault prevention information, and drug and alcohol prevention programming. The ASR also contains statistics of Clery Act crimes for Sacramento State for the last three (3) calendar years. Paper copies are available upon request at the Police Service Center located in the University Union. Eligibility Verification Selected candidate must furnish proof of eligibility to work in the U.S.. California State University, Sacramento is a sponsoring agency (i.e. H-1-B Visa). Note to Applicants: Possession of the minimum qualifications does not guarantee an interview unless required by collective bargaining agreement. Advertised: Mar 11 2024 Pacific Daylight Time Applications close: Closing Date/Time:
Mar 12, 2024
Working Title: Maintenance Mechanic Classification Title: Facilities Maintenance Mechanic Posting Details Priority Application Deadline (Posting will remain open until filled): Monday, March 25, 2024 @ 11:55pm PST Hiring Preference Not Applicable Position Summary Under general supervision, the Maintenance Mechanic is responsible for the full range of journey-level hardscape work and general facility work. The incumbent will perform a variety of maintenance and construction work on facilities systems, equipment, structures, and fixtures. FLSA : Non-exempt (eligible for overtime compensation under FLSA). Position is benefits-eligible. Anticipated Hiring Range : $6,076 per month - $6,630 per month; commensurate with candidate's education, experience, skills, and training. CSU Classification Salary Range : $5,787.00 - $7,396.00 per month Salary Grade/Range : 1 Recruitment Type : Regular (Probationary) Time Base : Full-Time Pay Plan : 12 month Work Hours : Monday - Friday, 6:00a.m. - 2:30p.m. Overtime may be required on the weekends and evenings . Hours may vary depending on operational needs. Position works on-site. Department Information Facilities Management is the steward for the university buildings, infrastructure, grounds and landscape. We perform maintenance and renovation to facilities, plan and manage new building construction and support the Redefine the Possible initiative through our commitment to building a welcoming campus and by creating a dynamic physical environment for students, faculty, staff, and the community. Facilities Management takes pride in being the stewards of Sacramento State Campus capital assets and invites you to join the dynamic team! Please visit our website for additional information https://www.csus.edu/administration-business-affairs/facilities-management/ Minimum Qualifications Knowledge: Work requires thorough knowledge of the methods, materials, equipment and tools used in one skilled trade area; working knowledge of materials, methods, equipment and tools in related trade areas pertaining to facilities, systems, construction and renovation; thorough knowledge of generally accepted trade practices in trade specialty; working knowledge of computerized maintenance and building automation systems; working knowledge of applicable building and safety codes and regulations related to facilities, systems and renovations. Abilities: Must be able to demonstrate journey-level skill in one trade and strong skills in other applicable trades; operate construction and related equipment; use considerable judgment and discretion in performing duties; read, interpret and work from blueprints, plans, drawings, and specifications; make rough sketches; estimate cost, time and materials of maintenance, repair and renovation work; maintain records and retrieve data related to work performed using manual and/or computerized record-keeping systems; prepare standard reports; provide instruction to unskilled and semi-skilled assistants; analyze and respond to emergency situations; read and write at a level appropriate to the position; and perform arithmetic calculations as required by the position. Experience: These abilities normally would be acquired through four years of increasingly responsible experience leading to journey-level skills in a mechanical or facilities/building trade, or any equivalent combination of training and experience as a facilities and systems mechanic which demonstrates the achievement of journey-level skills equivalent to that acquired through completion of an applicable apprenticeship program. Required Qualifications Demonstrated expertise in areas of construction/maintenance Demonstrated knowledge of applicable building and safety codes and regulations related to concrete/hardscape trade and general construction related to facilities systems and renovations Good communications and interpersonal skills, with the ability to provide excellent customer service in a diverse working environment Ability to work professionally, cooperatively, and safely with a variety of customers and environments Ability to safely perform the physical requirements of the position, including the ability to safely move a minimum of 50 pounds, in a variety of work environments (i.e. confined spaces, around mechanical devices etc.) Ability to use standard office equipment (e.g. desktop computer), standard office software (e.g. Microsoft Office Suite, Adobe Acrobat Reader), and the internet Completion of an apprenticeship program or experience equivalent leading to a journey-level concrete/hardscape tradesman Four or more years journey-level experience in the operation, maintenance, and repair of concrete/hardscape systems Have certification or willing to become asbestos abatement certified Experience using computerized maintenance management systems Commitment to maintaining a welcoming and inclusive work environment with diverse colleagues and constituents including faculty, students, staff, and members of the community. Other Requirements Possession of a valid driver’s license and maintenance of a good driving record. Conditions of Employment Ability to pass a background check. Preferred Qualifications 12. Knowledge and experience in concrete, asphalt, and hardscape installation and repair 13. Ability to operate heavy equipment 14. Knowledge of ADA access requirements Required Licenses/Certifications CA Drivers License/ Clean Driving Record Documents Needed to Apply Resume and cover letter. Failure upload required documents to the online application may result in disqualification. Three professional references are required as part of the online application. About Sac State Sacramento State is located in the heart of California’s capital city, five miles from State Capitol. The lush, 300-acre campus is situated along the American River, close to numerous bike trails and other recreational areas. Sacramento, also known as the “Farm-to-Fork Capital,” is one of the most ethnically diverse and livable cities in the country, with a population of half of a million. Sacramento State’s 31,000 students come not only from the Greater Sacramento Region, but also from across the state, country, and world. Our 1800 faculty and 1,500 staff are committed to meeting our mission: “ As California’s capital university, we transform lives by preparing students for leadership, service, and success. Sacramento State will be a recognized leader in education, innovation, and engagement. ” As the regional hub of higher education, Sac State is dedicated to student success , diversity, equity and inclusion , community engagement , philanthropy , and campus safety . As evidenced by the values embedded in our Hornet Honor Code , Sacramento State is committed to creating an inclusive environment where all faculty, staff, students, and guests are welcome and valued. Our commitment is more than simply ensuring that our campus is free from bias and discrimination, but is one devoted to celebrating many diverse identities, life experiences, and perspectives that enrich our community, teaching and learning. To learn more about why you should join the Hornet Family, please visit the Why Sac State ? page. Background Check Disclaimer A background check (including a criminal records check) must be completed satisfactorily before any candidate can be offered a position with California State University, Sacramento. Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current California State University, Sacramento employees who apply for the position. One variation of background check required could be a LiveScan screening, which involves submitting fingerprints at a certified LiveScan Service Center. COVID-19 Vaccine Certification Information: CSU requires faculty, staff, and students who are accessing campus facilities to be immunized against COVID-19 or declare a medical or religious exemption from doing so. Any candidates advanced in a currently open search process should be prepared to comply with this requirement. The systemwide policy can be found at https://calstate.policystat.com/policy/9779821/latest/ and questions may be sent to hr-empservices@csus.edu Out of State Employment Policy Sacramento State University, as part of the CSU system, is a State of California Employer. As such, the University requires all employees (up)on date of hire to reside in the State of California. As of January 1, 2022 the CSU Out-of-State Employment Policy prohibits the hiring of employees to perform CSU-related work outside the state of California. Equal Employment Opportunity California State University, Sacramento is an Affirmative Action/Equal Opportunity Employer and has a strong institutional commitment to the principle of diversity in all areas. We consider qualified applicants for employment without regard to race, color, religion, national origin, age, sex, gender identity/expression, sexual orientation, pregnancy, genetic information, medical condition, marital status, veteran status, or disability. Sacramento State hires only those individuals who are lawfully authorized to accept employment in the United States. It is the policy of California State University, Sacramento to provide reasonable accommodations for qualified persons with disabilities who are employees or applicants for employment. If you need a disability related reasonable accommodation as part of the application and/or interviewing process, visit https://www.csus.edu/administration-business-affairs/internal/your-hr/benefits/reasonable-accomodation.html . The University is committed to creating an education and working environment free from discrimination, sexual harassment, sexual violence, domestic violence, dating violence, and stalking. For more information on mandatory training for new employees, visit https://www.csus.edu/compliance/hr-compliance/mandatory-dhr-training.html . Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act and Campus Fire Safety Right-To-know Act Notification : Pursuant to the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act, the current Annual Security Report (ASR) is available for viewing at https://www.csus.edu/clery . The ASR contains the current security and safety-related policy statements, emergency preparedness and evacuation information, crime prevention and sexual assault prevention information, and drug and alcohol prevention programming. The ASR also contains statistics of Clery Act crimes for Sacramento State for the last three (3) calendar years. Paper copies are available upon request at the Police Service Center located in the University Union. Eligibility Verification Selected candidate must furnish proof of eligibility to work in the U.S.. California State University, Sacramento is a sponsoring agency (i.e. H-1-B Visa). Note to Applicants: Possession of the minimum qualifications does not guarantee an interview unless required by collective bargaining agreement. Advertised: Mar 11 2024 Pacific Daylight Time Applications close: Closing Date/Time:
Summary This is a transfer opportunity, and first consideration is given to qualified transfer-eligible employees in the job classification family and then SEIU 925 Wastewater Treatment applicants. If no qualified internal candidate is selected, external applicants will be considered. This posting may be used to establish a list of qualified candidates for the Industrial Maintenance Mechanic in the following 6 months. The King County Wastewater Treatment Division (WTD) has a staffing need for experienced and technically proficient Industrial Maintenance Mechanics at our South Treatment Plant. If you are looking for the ability to grow in the mechanical field, this opportunity will utilize and expand your technical skills and knowledge in an industrial setting working on a large variety of systems and projects. As a mission critical employee our efforts directly support operations as we collaborate with other plant crafts to resolve issues and achieve common goals. About the Role: This position will perform a variety of work ranging from small individual projects to major pump repairs. The role will be responsible for mechanical repairs and maintenance but not limited to a wide variety of skilled technical duties to design, construct, maintain, troubleshoot, modify mechanical systems, plumbing, welding, mechanical rebuilds, pneumatics, hydraulics, and related equipment. About the Team: The wastewater treatment division carries out essential work that protects the environment and all members of the public. We are comprised of a group of professionals that strives to deliver outstanding service through a collaborative effort both at our treatment plants and offsite collection facilities. The Industrial Maintenance Team are a critical component within the wastewater treatment division helping to fulfill the county's mission to protect the region's water, air, land, and natural habitats. Commitment to Equity, Racial and Social Justice: King County, named after Dr. Martin Luther King, Jr., is a diverse and vibrant community that represents cultures from around the world. Our True North is to create a welcoming community where everyone can thrive. We prioritize equity, racial and social justice, making it a foundational and daily expectation for all employees. As an Industrial Maintenance Mechanic, you will actively apply these principles in all aspects of your work. Learn more about our commitment at http://www.kingcounty.gov/equity . Apply now for a rewarding career at the Wastewater Treatment Division of King County Department of Natural Resources & Parks (DNRP). Join our talented workforce in protecting and restoring the natural environment and promoting more resilient, sustainable, and equitable communities. Enjoy training, c omprehensive benefits , and growth opportunities. Job Duties What You Will Be Doing: Maintain, repair, troubleshoot and overhaul a variety of complex machinery. Install, repair, maintain and design piping and plumbing systems for sewage, water, gases, chemicals and solids using appropriate materials. Install, design and fabricate a variety of metal fixtures including vents, air ducts, doors, louvers, containers, equipment covers, machinery bases and support members Design, fabricate and repair plant piping, equipment guards and bases using welding equipment, metal inert and tungsten inert gases, arc, cutting, torch and plasma cutter and plastic welder. Plan equipment repairs using blueprints, engineering drawings, computer-aided design, Maintenance Information Management System (MIMS), operations and maintenance manuals, vendor data, catalogs, internet or intranet information, work with Computer-Aided Design (CAD) personnel to provide as-built drawings to facilitate parts and material ordering, equipment assembly and modifications. Perform other duties as assigned Experience, Qualifications, Knowledge, Skills Qualifications You Bring : Knowledge of the mechanical maintenance trade which is typically found in two years of working experience as a millwright or related occupation which includes a broad scope of mechanical maintenance responsibilities. Knowledge of the application of plumbing techniques and principles. Knowledge of all types of welding techniques and principles including flat position welding. Knowledge of the use of vibration analysis techniques, measurements, test equipment and software in troubleshooting and/or maintaining rotating machinery. Knowledge of the application of pump/motor overhaul techniques and principles. Knowledge of packing, bearings, and mechanical seals Knowledge of in reading schematic drawings. Knowledge of the use and care of power and hand tools and their safe operation. Basic knowledge of carpentry techniques to build supports for the repair and overhaul of machinery. Knowledge of safety procedures associated with handling hazardous materials. Knowledge of using an automated maintenance work order system. Knowledge and demonstrated skill in using a computer and associated software. Knowledge of the application of lubrication principles and techniques. Demonstrated skill in the use of troubleshooting equipment, machinist measuring techniques and tools and the operation of mills, lathes and drill press. Excellent oral and written communication techniques and principles. Able to apply these skills in reading, writing, and following oral and written instructions. Skill in working with a diverse group of individuals in varying occupations and varying skill levels. Skill in working in a team environment. Competencies You Bring : Action Oriented: Identifies and seizes new opportunities; Displays a can-do attitude in good and bad times; Steps up to handle tough issues. Manages Ambiguity: Deals comfortably with the uncertainty of change; Is calm and productive, even when things are up in the air; Deals constructively with the problems that do not have clear solutions or outcomes. Collaborates: Works cooperatively with others across the organization to achieve shared objectives; Partners with others to get work done; Credits others for their contributions and accomplishments; Gains trust and support of others. Communicates Effectively: Is effective in a variety of communication settings: one-on-one, small and large groups, or among diverse styles and position levels; Attentively listens to others; Provides timely and helpful information to others across the organization. Required Licenses: Washington State Driver's License. Additional licenses, certifications and other requirements determined to be necessary to meet the business needs of the employing unit may be required. It Would Be Great if You Also Bring : Demonstrated work experience in the industrial maintenance mechanic or Millwright classification. Supplemental Information Working Conditions: Work Location : South Treatment Plant - 1200 Monster Road SW, Renton, WA 98057 Work Schedule: This full-time position works a 40-hour work week with a 4 days per week, 10 hours per day work schedule, Monday - Thursday or Tuesday to Friday. The work schedule will be determined based on business needs. This position is covered under the provisions of the Fair Labor Standards Act (FLSA) and is overtime eligible. The position requires the ability to work all shift schedules and required to report to work during adverse and inclement weather conditions. Mandatory participation in afterhours on-call rotation after the completed probationary period. Union Representation : This position is represented by S.E.I.U. 925 (Wastewater Treatment Division) Physical Requirement : Incumbents perform field work at a wastewater treatment plant and associated facilities and are required to lift and carry equipment weighing up to 50 pounds, use ladders, and there is exposure to hazardous chemicals and noxious odors. Application and Selection Process: We welcome applications from all qualified applicants. We value diversity, diverse perspectives and life experience and encourage people of all backgrounds to apply. Application materials will be screened for clarity, completeness and alignment with the experience, qualifications, knowledge, and skills essential for this role to determine which candidates may be invited to participate in a technical assessment and one or more panel interviews. To apply, submit a: Complete Application Resume Cover Letter Note: Additional documents won't be considered during minimum qualification screening. Who to Contact: For more information regarding this recruitment, please contact Helen David at hdavid@kingcounty.gov Discover More About the Wastewater Treatment Division: Visit our website and check us out at Facebook , X (formerly Twitter) , Instagram , YouTube and our WTD Blog . Discover More About DNRP : Visit our website , explore an interactive map of our recent accomplishments and check us out at Facebook , X (formerly Twitter) , LinkedIn , TikTok , Instagram , YouTube and Keeping King County Green News . Sign up for Job Alerts to be notified of additional career opportunities with King County. Select the Natural Resources category for DNRP opportunities and explore other categories of interest. Forbes named King County as one of Washington State's best employers. Together, with leadership and our employees, we're changing the way government delivers service and winning national recognition as a model of excellence. Are you ready to make a difference? Come join the team dedicated to serving one of the nation's best places to live, work and play. Guided by our "True North" , we are making King County a welcoming community where every person can thrive. We value diversity, inclusion and belonging in our workplace and workforce. To reach this goal we are committed to workforce equity. Equitable recruiting, support, and retention is how we will obtain the highest quality workforce in our region; a workforce that shares and will help advance our guiding principles - we are one team; we solve problems; we focus on the customer; we drive for results; we are racially just; we respect all people; we lead the way; and we are responsible stewards. We encourage people of all backgrounds and identities to apply, including Native American and people of color, immigrants, refugees, women, LGBTQ+, people living with disabilities, and veterans. King County is an Equal Employment Opportunity (EEO) Employer No person is unlawfully excluded from employment opportunities based on race, color, religion, national origin, sex (including gender identity, sexual orientation and pregnancy), age, genetic information, disability, veteran status, or other protected class. Our EEO policy applies to all employment actions, including but not limited to recruitment, hiring, selection for training, promotion, transfer, demotion, layoff, termination, rates of pay or other forms of compensation. To Apply If you are interested in pursuing this position, please follow the application instructions carefully. If you need this announcement in an alternate language or format, would like to request accommodation or assistance in the application or assessment process or if you have questions please contact the recruiter listed on this job announcement. Closing Date/Time:
Apr 06, 2024
Full Time
Summary This is a transfer opportunity, and first consideration is given to qualified transfer-eligible employees in the job classification family and then SEIU 925 Wastewater Treatment applicants. If no qualified internal candidate is selected, external applicants will be considered. This posting may be used to establish a list of qualified candidates for the Industrial Maintenance Mechanic in the following 6 months. The King County Wastewater Treatment Division (WTD) has a staffing need for experienced and technically proficient Industrial Maintenance Mechanics at our South Treatment Plant. If you are looking for the ability to grow in the mechanical field, this opportunity will utilize and expand your technical skills and knowledge in an industrial setting working on a large variety of systems and projects. As a mission critical employee our efforts directly support operations as we collaborate with other plant crafts to resolve issues and achieve common goals. About the Role: This position will perform a variety of work ranging from small individual projects to major pump repairs. The role will be responsible for mechanical repairs and maintenance but not limited to a wide variety of skilled technical duties to design, construct, maintain, troubleshoot, modify mechanical systems, plumbing, welding, mechanical rebuilds, pneumatics, hydraulics, and related equipment. About the Team: The wastewater treatment division carries out essential work that protects the environment and all members of the public. We are comprised of a group of professionals that strives to deliver outstanding service through a collaborative effort both at our treatment plants and offsite collection facilities. The Industrial Maintenance Team are a critical component within the wastewater treatment division helping to fulfill the county's mission to protect the region's water, air, land, and natural habitats. Commitment to Equity, Racial and Social Justice: King County, named after Dr. Martin Luther King, Jr., is a diverse and vibrant community that represents cultures from around the world. Our True North is to create a welcoming community where everyone can thrive. We prioritize equity, racial and social justice, making it a foundational and daily expectation for all employees. As an Industrial Maintenance Mechanic, you will actively apply these principles in all aspects of your work. Learn more about our commitment at http://www.kingcounty.gov/equity . Apply now for a rewarding career at the Wastewater Treatment Division of King County Department of Natural Resources & Parks (DNRP). Join our talented workforce in protecting and restoring the natural environment and promoting more resilient, sustainable, and equitable communities. Enjoy training, c omprehensive benefits , and growth opportunities. Job Duties What You Will Be Doing: Maintain, repair, troubleshoot and overhaul a variety of complex machinery. Install, repair, maintain and design piping and plumbing systems for sewage, water, gases, chemicals and solids using appropriate materials. Install, design and fabricate a variety of metal fixtures including vents, air ducts, doors, louvers, containers, equipment covers, machinery bases and support members Design, fabricate and repair plant piping, equipment guards and bases using welding equipment, metal inert and tungsten inert gases, arc, cutting, torch and plasma cutter and plastic welder. Plan equipment repairs using blueprints, engineering drawings, computer-aided design, Maintenance Information Management System (MIMS), operations and maintenance manuals, vendor data, catalogs, internet or intranet information, work with Computer-Aided Design (CAD) personnel to provide as-built drawings to facilitate parts and material ordering, equipment assembly and modifications. Perform other duties as assigned Experience, Qualifications, Knowledge, Skills Qualifications You Bring : Knowledge of the mechanical maintenance trade which is typically found in two years of working experience as a millwright or related occupation which includes a broad scope of mechanical maintenance responsibilities. Knowledge of the application of plumbing techniques and principles. Knowledge of all types of welding techniques and principles including flat position welding. Knowledge of the use of vibration analysis techniques, measurements, test equipment and software in troubleshooting and/or maintaining rotating machinery. Knowledge of the application of pump/motor overhaul techniques and principles. Knowledge of packing, bearings, and mechanical seals Knowledge of in reading schematic drawings. Knowledge of the use and care of power and hand tools and their safe operation. Basic knowledge of carpentry techniques to build supports for the repair and overhaul of machinery. Knowledge of safety procedures associated with handling hazardous materials. Knowledge of using an automated maintenance work order system. Knowledge and demonstrated skill in using a computer and associated software. Knowledge of the application of lubrication principles and techniques. Demonstrated skill in the use of troubleshooting equipment, machinist measuring techniques and tools and the operation of mills, lathes and drill press. Excellent oral and written communication techniques and principles. Able to apply these skills in reading, writing, and following oral and written instructions. Skill in working with a diverse group of individuals in varying occupations and varying skill levels. Skill in working in a team environment. Competencies You Bring : Action Oriented: Identifies and seizes new opportunities; Displays a can-do attitude in good and bad times; Steps up to handle tough issues. Manages Ambiguity: Deals comfortably with the uncertainty of change; Is calm and productive, even when things are up in the air; Deals constructively with the problems that do not have clear solutions or outcomes. Collaborates: Works cooperatively with others across the organization to achieve shared objectives; Partners with others to get work done; Credits others for their contributions and accomplishments; Gains trust and support of others. Communicates Effectively: Is effective in a variety of communication settings: one-on-one, small and large groups, or among diverse styles and position levels; Attentively listens to others; Provides timely and helpful information to others across the organization. Required Licenses: Washington State Driver's License. Additional licenses, certifications and other requirements determined to be necessary to meet the business needs of the employing unit may be required. It Would Be Great if You Also Bring : Demonstrated work experience in the industrial maintenance mechanic or Millwright classification. Supplemental Information Working Conditions: Work Location : South Treatment Plant - 1200 Monster Road SW, Renton, WA 98057 Work Schedule: This full-time position works a 40-hour work week with a 4 days per week, 10 hours per day work schedule, Monday - Thursday or Tuesday to Friday. The work schedule will be determined based on business needs. This position is covered under the provisions of the Fair Labor Standards Act (FLSA) and is overtime eligible. The position requires the ability to work all shift schedules and required to report to work during adverse and inclement weather conditions. Mandatory participation in afterhours on-call rotation after the completed probationary period. Union Representation : This position is represented by S.E.I.U. 925 (Wastewater Treatment Division) Physical Requirement : Incumbents perform field work at a wastewater treatment plant and associated facilities and are required to lift and carry equipment weighing up to 50 pounds, use ladders, and there is exposure to hazardous chemicals and noxious odors. Application and Selection Process: We welcome applications from all qualified applicants. We value diversity, diverse perspectives and life experience and encourage people of all backgrounds to apply. Application materials will be screened for clarity, completeness and alignment with the experience, qualifications, knowledge, and skills essential for this role to determine which candidates may be invited to participate in a technical assessment and one or more panel interviews. To apply, submit a: Complete Application Resume Cover Letter Note: Additional documents won't be considered during minimum qualification screening. Who to Contact: For more information regarding this recruitment, please contact Helen David at hdavid@kingcounty.gov Discover More About the Wastewater Treatment Division: Visit our website and check us out at Facebook , X (formerly Twitter) , Instagram , YouTube and our WTD Blog . Discover More About DNRP : Visit our website , explore an interactive map of our recent accomplishments and check us out at Facebook , X (formerly Twitter) , LinkedIn , TikTok , Instagram , YouTube and Keeping King County Green News . Sign up for Job Alerts to be notified of additional career opportunities with King County. Select the Natural Resources category for DNRP opportunities and explore other categories of interest. Forbes named King County as one of Washington State's best employers. Together, with leadership and our employees, we're changing the way government delivers service and winning national recognition as a model of excellence. Are you ready to make a difference? Come join the team dedicated to serving one of the nation's best places to live, work and play. Guided by our "True North" , we are making King County a welcoming community where every person can thrive. We value diversity, inclusion and belonging in our workplace and workforce. To reach this goal we are committed to workforce equity. Equitable recruiting, support, and retention is how we will obtain the highest quality workforce in our region; a workforce that shares and will help advance our guiding principles - we are one team; we solve problems; we focus on the customer; we drive for results; we are racially just; we respect all people; we lead the way; and we are responsible stewards. We encourage people of all backgrounds and identities to apply, including Native American and people of color, immigrants, refugees, women, LGBTQ+, people living with disabilities, and veterans. King County is an Equal Employment Opportunity (EEO) Employer No person is unlawfully excluded from employment opportunities based on race, color, religion, national origin, sex (including gender identity, sexual orientation and pregnancy), age, genetic information, disability, veteran status, or other protected class. Our EEO policy applies to all employment actions, including but not limited to recruitment, hiring, selection for training, promotion, transfer, demotion, layoff, termination, rates of pay or other forms of compensation. To Apply If you are interested in pursuing this position, please follow the application instructions carefully. If you need this announcement in an alternate language or format, would like to request accommodation or assistance in the application or assessment process or if you have questions please contact the recruiter listed on this job announcement. Closing Date/Time:
Summary First consideration is given to qualified SEIU 925 Wastewater Treatment applicants. If no qualified internal candidate is selected, external applicants will be considered. This posting may be used to establish a list of qualified candidates for the Industrial Maintenance Mechanic in the following 6 months. The King County Wastewater Treatment Division (WTD) has a staffing need for 5 experienced and technically proficient Industrial Maintenance Mechanics at our South (4 positions) and Brightwater (1 position) Treatment Plants. If you are looking for the ability to grow in the mechanical field, this opportunity will utilize and expand your technical skills and knowledge in an industrial setting working on a large variety of systems and projects. As a mission critical employee our efforts directly support operations as we collaborate with other plant crafts to resolve issues and achieve common goals. About the Role: This position will perform a variety of work ranging from small individual projects to major pump repairs. The role will be responsible for mechanical repairs and maintenance but not limited to a wide variety of skilled technical duties to design, construct, maintain, troubleshoot, modify mechanical systems, plumbing, welding, mechanical rebuilds, pneumatics, hydraulics, and related equipment. About the Team: The wastewater treatment division carries out essential work that protects the environment and all members of the public. We are comprised of a group of professionals that strives to deliver outstanding service through a collaborative effort both at our treatment plants and offsite collection facilities. The Industrial Maintenance Team are a critical component within the wastewater treatment division helping to fulfill the county's mission to protect the region's water, air, land, and natural habitats. Commitment to Equity, Racial and Social Justice: King County, named after Dr. Martin Luther King, Jr., is a diverse and vibrant community that represents cultures from around the world. Our True North is to create a welcoming community where everyone can thrive. We prioritize equity, racial and social justice, making it a foundational and daily expectation for all employees. As an Industrial Maintenance Mechanic, you will actively apply these principles in all aspects of your work. Learn more about our commitment at http://www.kingcounty.gov/equity . Apply now for a rewarding career at the Wastewater Treatment Division of King County Department of Natural Resources & Parks (DNRP). Join our talented workforce in protecting and restoring the natural environment and promoting more resilient, sustainable, and equitable communities. Enjoy training, c omprehensive benefits , and growth opportunities. Job Duties What You Will Be Doing: Maintain, repair, troubleshoot and overhaul a variety of complex machinery. Install, repair, maintain and design piping and plumbing systems for sewage, water, gases, chemicals and solids using appropriate materials. Install, design and fabricate a variety of metal fixtures including vents, air ducts, doors, louvers, containers, equipment covers, machinery bases and support members Design, fabricate and repair plant piping, equipment guards and bases using welding equipment, metal inert and tungsten inert gases, arc, cutting, torch and plasma cutter and plastic welder. Plan equipment repairs using blueprints, engineering drawings, computer-aided design, Maintenance Information Management System (MIMS), operations and maintenance manuals, vendor data, catalogs, internet or intranet information, work with Computer-Aided Design (CAD) personnel to provide as-built drawings to facilitate parts and material ordering, equipment assembly and modifications. Perform other duties as assigned Experience, Qualifications, Knowledge, Skills Qualifications You Bring : Knowledge of the mechanical maintenance trade which is typically found in two years of working experience as a millwright or related occupation which includes a broad scope of mechanical maintenance responsibilities. Knowledge of the application of plumbing techniques and principles. Knowledge of all types of welding techniques and principles including flat position welding. Knowledge of the use of vibration analysis techniques, measurements, test equipment and software in troubleshooting and/or maintaining rotating machinery. Knowledge of the application of pump/motor overhaul techniques and principles. Knowledge of packing, bearings, and mechanical seals Knowledge of in reading schematic drawings. Knowledge of the use and care of power and hand tools and their safe operation. Basic knowledge of carpentry techniques to build supports for the repair and overhaul of machinery. Knowledge of safety procedures associated with handling hazardous materials. Knowledge of using an automated maintenance work order system. Knowledge and demonstrated skill in using a computer and associated software. Knowledge of the application of lubrication principles and techniques. Demonstrated skill in the use of troubleshooting equipment, machinist measuring techniques and tools and the operation of mills, lathes and drill press. Excellent oral and written communication techniques and principles. Able to apply these skills in reading, writing, and following oral and written instructions. Skill in working with a diverse group of individuals in varying occupations and varying skill levels. Skill in working in a team environment. Competencies You Bring : Action Oriented: Identifies and seizes new opportunities; Displays a can-do attitude in good and bad times; Steps up to handle tough issues. Manages Ambiguity: Deals comfortably with the uncertainty of change; Is calm and productive, even when things are up in the air; Deals constructively with the problems that do not have clear solutions or outcomes. Collaborates: Works cooperatively with others across the organization to achieve shared objectives; Partners with others to get work done; Credits others for their contributions and accomplishments; Gains trust and support of others. Communicates Effectively: Is effective in a variety of communication settings: one-on-one, small and large groups, or among diverse styles and position levels; Attentively listens to others; Provides timely and helpful information to others across the organization. Required Licenses: Washington State Driver's License. Additional licenses, certifications and other requirements determined to be necessary to meet the business needs of the employing unit may be required. It Would Be Great if You Also Bring : Demonstrated work experience in the industrial maintenance mechanic or Millwright classification. Supplemental Information Working Conditions: Work Location : South Treatment Plant - 1200 Monster Road SW, Renton, WA 98057 or Brightwater Treatment Plant - 22505 WA-9, Woodinville, WA 98072 Work Schedule: This full-time position works a 40-hour work week with a 4 days per week, 10 hours per day work schedule, Monday - Thursday or Tuesday to Friday. The work schedule will be determined based on business needs. This position is covered under the provisions of the Fair Labor Standards Act (FLSA) and is overtime eligible. The position requires the ability to work all shift schedules and required to report to work during adverse and inclement weather conditions. Mandatory participation in afterhours on-call rotation after the completed probationary period. Union Representation : This position is represented by S.E.I.U. 925 (Wastewater Treatment Division) Physical Requirement : Incumbents perform field work at a wastewater treatment plant and associated facilities and are required to lift and carry equipment weighing up to 50 pounds, use ladders, and there is exposure to hazardous chemicals and noxious odors. Application and Selection Process: We welcome applications from all qualified applicants. We value diversity, diverse perspectives and life experience and encourage people of all backgrounds to apply. Application materials will be screened for clarity, completeness and alignment with the experience, qualifications, knowledge, and skills essential for this role to determine which candidates may be invited to participate in a technical assessment and one or more panel interviews. To apply, submit a: Complete Application Resume Cover Letter Note: Additional documents won't be considered during minimum qualification screening. Who to Contact: For more information regarding this recruitment, please contact Helen David at hdavid@kingcounty.gov Discover More About the Wastewater Treatment Division: Visit our website and check us out at Facebook , X (formerly Twitter) , Instagram , YouTube and our WTD Blog . Discover More About DNRP : Visit our website , explore an interactive map of our recent accomplishments and check us out at Facebook , X (formerly Twitter) , LinkedIn , TikTok , Instagram , YouTube and Keeping King County Green News . Sign up for Job Alerts to be notified of additional career opportunities with King County. Select the Natural Resources category for DNRP opportunities and explore other categories of interest. Forbes named King County as one of Washington State's best employers. Together, with leadership and our employees, we're changing the way government delivers service and winning national recognition as a model of excellence. Are you ready to make a difference? Come join the team dedicated to serving one of the nation's best places to live, work and play. Guided by our "True North" , we are making King County a welcoming community where every person can thrive. We value diversity, inclusion and belonging in our workplace and workforce. To reach this goal we are committed to workforce equity. Equitable recruiting, support, and retention is how we will obtain the highest quality workforce in our region; a workforce that shares and will help advance our guiding principles - we are one team; we solve problems; we focus on the customer; we drive for results; we are racially just; we respect all people; we lead the way; and we are responsible stewards. We encourage people of all backgrounds and identities to apply, including Native American and people of color, immigrants, refugees, women, LGBTQ+, people living with disabilities, and veterans. King County is an Equal Employment Opportunity (EEO) Employer No person is unlawfully excluded from employment opportunities based on race, color, religion, national origin, sex (including gender identity, sexual orientation and pregnancy), age, genetic information, disability, veteran status, or other protected class. Our EEO policy applies to all employment actions, including but not limited to recruitment, hiring, selection for training, promotion, transfer, demotion, layoff, termination, rates of pay or other forms of compensation. To Apply If you are interested in pursuing this position, please follow the application instructions carefully. If you need this announcement in an alternate language or format, would like to request accommodation or assistance in the application or assessment process or if you have questions please contact the recruiter listed on this job announcement. Closing Date/Time:
Apr 06, 2024
Part Time
Summary First consideration is given to qualified SEIU 925 Wastewater Treatment applicants. If no qualified internal candidate is selected, external applicants will be considered. This posting may be used to establish a list of qualified candidates for the Industrial Maintenance Mechanic in the following 6 months. The King County Wastewater Treatment Division (WTD) has a staffing need for 5 experienced and technically proficient Industrial Maintenance Mechanics at our South (4 positions) and Brightwater (1 position) Treatment Plants. If you are looking for the ability to grow in the mechanical field, this opportunity will utilize and expand your technical skills and knowledge in an industrial setting working on a large variety of systems and projects. As a mission critical employee our efforts directly support operations as we collaborate with other plant crafts to resolve issues and achieve common goals. About the Role: This position will perform a variety of work ranging from small individual projects to major pump repairs. The role will be responsible for mechanical repairs and maintenance but not limited to a wide variety of skilled technical duties to design, construct, maintain, troubleshoot, modify mechanical systems, plumbing, welding, mechanical rebuilds, pneumatics, hydraulics, and related equipment. About the Team: The wastewater treatment division carries out essential work that protects the environment and all members of the public. We are comprised of a group of professionals that strives to deliver outstanding service through a collaborative effort both at our treatment plants and offsite collection facilities. The Industrial Maintenance Team are a critical component within the wastewater treatment division helping to fulfill the county's mission to protect the region's water, air, land, and natural habitats. Commitment to Equity, Racial and Social Justice: King County, named after Dr. Martin Luther King, Jr., is a diverse and vibrant community that represents cultures from around the world. Our True North is to create a welcoming community where everyone can thrive. We prioritize equity, racial and social justice, making it a foundational and daily expectation for all employees. As an Industrial Maintenance Mechanic, you will actively apply these principles in all aspects of your work. Learn more about our commitment at http://www.kingcounty.gov/equity . Apply now for a rewarding career at the Wastewater Treatment Division of King County Department of Natural Resources & Parks (DNRP). Join our talented workforce in protecting and restoring the natural environment and promoting more resilient, sustainable, and equitable communities. Enjoy training, c omprehensive benefits , and growth opportunities. Job Duties What You Will Be Doing: Maintain, repair, troubleshoot and overhaul a variety of complex machinery. Install, repair, maintain and design piping and plumbing systems for sewage, water, gases, chemicals and solids using appropriate materials. Install, design and fabricate a variety of metal fixtures including vents, air ducts, doors, louvers, containers, equipment covers, machinery bases and support members Design, fabricate and repair plant piping, equipment guards and bases using welding equipment, metal inert and tungsten inert gases, arc, cutting, torch and plasma cutter and plastic welder. Plan equipment repairs using blueprints, engineering drawings, computer-aided design, Maintenance Information Management System (MIMS), operations and maintenance manuals, vendor data, catalogs, internet or intranet information, work with Computer-Aided Design (CAD) personnel to provide as-built drawings to facilitate parts and material ordering, equipment assembly and modifications. Perform other duties as assigned Experience, Qualifications, Knowledge, Skills Qualifications You Bring : Knowledge of the mechanical maintenance trade which is typically found in two years of working experience as a millwright or related occupation which includes a broad scope of mechanical maintenance responsibilities. Knowledge of the application of plumbing techniques and principles. Knowledge of all types of welding techniques and principles including flat position welding. Knowledge of the use of vibration analysis techniques, measurements, test equipment and software in troubleshooting and/or maintaining rotating machinery. Knowledge of the application of pump/motor overhaul techniques and principles. Knowledge of packing, bearings, and mechanical seals Knowledge of in reading schematic drawings. Knowledge of the use and care of power and hand tools and their safe operation. Basic knowledge of carpentry techniques to build supports for the repair and overhaul of machinery. Knowledge of safety procedures associated with handling hazardous materials. Knowledge of using an automated maintenance work order system. Knowledge and demonstrated skill in using a computer and associated software. Knowledge of the application of lubrication principles and techniques. Demonstrated skill in the use of troubleshooting equipment, machinist measuring techniques and tools and the operation of mills, lathes and drill press. Excellent oral and written communication techniques and principles. Able to apply these skills in reading, writing, and following oral and written instructions. Skill in working with a diverse group of individuals in varying occupations and varying skill levels. Skill in working in a team environment. Competencies You Bring : Action Oriented: Identifies and seizes new opportunities; Displays a can-do attitude in good and bad times; Steps up to handle tough issues. Manages Ambiguity: Deals comfortably with the uncertainty of change; Is calm and productive, even when things are up in the air; Deals constructively with the problems that do not have clear solutions or outcomes. Collaborates: Works cooperatively with others across the organization to achieve shared objectives; Partners with others to get work done; Credits others for their contributions and accomplishments; Gains trust and support of others. Communicates Effectively: Is effective in a variety of communication settings: one-on-one, small and large groups, or among diverse styles and position levels; Attentively listens to others; Provides timely and helpful information to others across the organization. Required Licenses: Washington State Driver's License. Additional licenses, certifications and other requirements determined to be necessary to meet the business needs of the employing unit may be required. It Would Be Great if You Also Bring : Demonstrated work experience in the industrial maintenance mechanic or Millwright classification. Supplemental Information Working Conditions: Work Location : South Treatment Plant - 1200 Monster Road SW, Renton, WA 98057 or Brightwater Treatment Plant - 22505 WA-9, Woodinville, WA 98072 Work Schedule: This full-time position works a 40-hour work week with a 4 days per week, 10 hours per day work schedule, Monday - Thursday or Tuesday to Friday. The work schedule will be determined based on business needs. This position is covered under the provisions of the Fair Labor Standards Act (FLSA) and is overtime eligible. The position requires the ability to work all shift schedules and required to report to work during adverse and inclement weather conditions. Mandatory participation in afterhours on-call rotation after the completed probationary period. Union Representation : This position is represented by S.E.I.U. 925 (Wastewater Treatment Division) Physical Requirement : Incumbents perform field work at a wastewater treatment plant and associated facilities and are required to lift and carry equipment weighing up to 50 pounds, use ladders, and there is exposure to hazardous chemicals and noxious odors. Application and Selection Process: We welcome applications from all qualified applicants. We value diversity, diverse perspectives and life experience and encourage people of all backgrounds to apply. Application materials will be screened for clarity, completeness and alignment with the experience, qualifications, knowledge, and skills essential for this role to determine which candidates may be invited to participate in a technical assessment and one or more panel interviews. To apply, submit a: Complete Application Resume Cover Letter Note: Additional documents won't be considered during minimum qualification screening. Who to Contact: For more information regarding this recruitment, please contact Helen David at hdavid@kingcounty.gov Discover More About the Wastewater Treatment Division: Visit our website and check us out at Facebook , X (formerly Twitter) , Instagram , YouTube and our WTD Blog . Discover More About DNRP : Visit our website , explore an interactive map of our recent accomplishments and check us out at Facebook , X (formerly Twitter) , LinkedIn , TikTok , Instagram , YouTube and Keeping King County Green News . Sign up for Job Alerts to be notified of additional career opportunities with King County. Select the Natural Resources category for DNRP opportunities and explore other categories of interest. Forbes named King County as one of Washington State's best employers. Together, with leadership and our employees, we're changing the way government delivers service and winning national recognition as a model of excellence. Are you ready to make a difference? Come join the team dedicated to serving one of the nation's best places to live, work and play. Guided by our "True North" , we are making King County a welcoming community where every person can thrive. We value diversity, inclusion and belonging in our workplace and workforce. To reach this goal we are committed to workforce equity. Equitable recruiting, support, and retention is how we will obtain the highest quality workforce in our region; a workforce that shares and will help advance our guiding principles - we are one team; we solve problems; we focus on the customer; we drive for results; we are racially just; we respect all people; we lead the way; and we are responsible stewards. We encourage people of all backgrounds and identities to apply, including Native American and people of color, immigrants, refugees, women, LGBTQ+, people living with disabilities, and veterans. King County is an Equal Employment Opportunity (EEO) Employer No person is unlawfully excluded from employment opportunities based on race, color, religion, national origin, sex (including gender identity, sexual orientation and pregnancy), age, genetic information, disability, veteran status, or other protected class. Our EEO policy applies to all employment actions, including but not limited to recruitment, hiring, selection for training, promotion, transfer, demotion, layoff, termination, rates of pay or other forms of compensation. To Apply If you are interested in pursuing this position, please follow the application instructions carefully. If you need this announcement in an alternate language or format, would like to request accommodation or assistance in the application or assessment process or if you have questions please contact the recruiter listed on this job announcement. Closing Date/Time:
Sonoma State University
1801 E Cotati Ave, Rohnert Park, California, USA
Application Process This position is open until filled. For full consideration, please submit application, along with cover letter and resume, by 8am on Tuesday, April 2, 2024. In your cover letter, please share why you want to work for Facilities Management and how your work experience is relevant to this position. Please review the position description listed above for full scope of responsibilities and qualifications. Evidence of degree(s) or certificate(s) and/or license(s) required at time of hire. Job Summary Available work schedule: Monday through Friday, 8:00 a.m. - 4:30 p.m. Reporting to the Housing Operations Manager, with additional lead work direction provided from other members of the Facilities Management team, the Maintenance Mechanic is responsible for all maintenance needs and work requests for student housing and any other structures or buildings operated by Sonoma State University. The incumbent independently performs a variety of skilled preventive and general maintenance, repair, construction, and renovation work on facilities and systems, including routine maintenance, repairs from normal wear and use, and vandalism. Key Qualifications This position requires four years of increasingly responsible experience leading to journey-level skills in a mechanical or facility/building trade, or any equivalent combination of training and experience as a facilities and systems mechanic which demonstrates the achievement of journey-level skills equivalent to that acquired through completion of an applicable apprenticeship program. Beginning proficiency with computers and Microsoft Office (Word, Excel) required. Knowledge of Google Suite, computerized work control system, building automation systems; and PeopleSoft preferred. The incumbent must successfully complete a pre-placement exam and must possess and maintain a California Driver’s License valid for the operation of any vehicle or equipment required to maintain and operate. Salary and Benefits Starting salary placement depends on qualifications and experience and is anticipated to be in the range of $5,787 to $6,076 a month. This is a full time, non-exempt position, which will lead toward permanent status following the successful completion of a probationary period. This position is eligible for a broad range of benefits, including medical, dental, vision, life and disability insurances, retirement (CalPERS), tuition waiver, vacation and sick leave. In addition, 15 paid holidays are offered each year. Sonoma State University is also a Public Service Loan Forgiveness Program (PSLF) Employer. A comprehensive benefits summary for this position is available online by clicking here to be taken to the CSU benefits page. Supplemental Information Sonoma State University is committed to achieving excellence through teaching, scholarship, learning and inclusion. In line with our Strategic Plan and our Seawolf Commitment, our values include diversity, sustainability, community engagement, respect, responsibility, excellence and integrity. We strive to cultivate a community in which a diverse population can learn and work in an atmosphere of civility and respect. We encourage innovation, experimentation and creativity, as well as contributions to equity and inclusion, in the pursuit of excellence for all members of our university community. The University is an Affirmative Action/Equal Opportunity Employer. We consider qualified applicants for employment without regard to race, religion, color, national origin, ancestry, age, sex, gender, gender identity, gender expression, sexual orientation, genetic information, medical condition, disability, marital status, or protected veteran status. Mandated Reporting: This position may be considered a "mandated reporter" under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. Per the CSU COVID-19 Vaccination Policy , it is strongly recommended that all faculty, staff, administrators, and students who are accessing campus facilities follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications. Any candidates advanced in a currently open search process should be prepared to continue to help us protect and maintain a healthy Seawolf Community. More information related to campus level requirements can be found here: https://risk.sonoma.edu/covid- compliance-and-monitoring- office . CSU Out of State Policy - Sonoma State University, as part of the CSU system, is a State of California Employer. As such, the University requires all employees upon date of hire to reside in the State of California. As of January 1, 2022 the CSU Out-of-State Employment Policy prohibits the hiring of employees to perform CSU-related work outside the state of California. A background check (including a criminal records check) must be completed satisfactorily before any candidate can be offered a position. Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current employees who apply for this position. Sonoma State University is not a sponsoring agency for staff positions (i.e. H-1B visas). Positions are posted for a minimum of 14 calendar days. For questions related to the application process, please reach out to hr@sonoma.edu . The ADA Coordinator is also available ( hraccommodations@sonoma.edu ) to assist individuals with disabilities in need of accommodation during the hiring process. Sonoma State University's Annual Security Report includes summaries of institutional policy relating to campus safety, drug and alcohol use, sexual assault, and other matters. The report is published in compliance with the Clery Act and includes three years of certain crime statistics that occurred in Clery Act defined geography. A paper copy of the report may be requested in person by emailing the Clery Compliance and Safety Office at clery@sonoma.edu . Pursuant to the Higher Education Opportunity Act, the Annual Fire Safety Report (AFSR) is available for viewing at https://housing.sonoma.edu/ resources/fire-safety . The purpose of this report is to disclose statistics for fires that occurred within Sonoma State University student housing facilities for three years, and to distribute fire safety policies and procedures intended to promote safety on campus. A paper copy of the AFSR is available upon request by contacting the Residential Education and Campus Housing at housing@sonoma.edu . Advertised: Mar 11 2024 Pacific Daylight Time Applications close: Closing Date/Time:
Mar 12, 2024
Application Process This position is open until filled. For full consideration, please submit application, along with cover letter and resume, by 8am on Tuesday, April 2, 2024. In your cover letter, please share why you want to work for Facilities Management and how your work experience is relevant to this position. Please review the position description listed above for full scope of responsibilities and qualifications. Evidence of degree(s) or certificate(s) and/or license(s) required at time of hire. Job Summary Available work schedule: Monday through Friday, 8:00 a.m. - 4:30 p.m. Reporting to the Housing Operations Manager, with additional lead work direction provided from other members of the Facilities Management team, the Maintenance Mechanic is responsible for all maintenance needs and work requests for student housing and any other structures or buildings operated by Sonoma State University. The incumbent independently performs a variety of skilled preventive and general maintenance, repair, construction, and renovation work on facilities and systems, including routine maintenance, repairs from normal wear and use, and vandalism. Key Qualifications This position requires four years of increasingly responsible experience leading to journey-level skills in a mechanical or facility/building trade, or any equivalent combination of training and experience as a facilities and systems mechanic which demonstrates the achievement of journey-level skills equivalent to that acquired through completion of an applicable apprenticeship program. Beginning proficiency with computers and Microsoft Office (Word, Excel) required. Knowledge of Google Suite, computerized work control system, building automation systems; and PeopleSoft preferred. The incumbent must successfully complete a pre-placement exam and must possess and maintain a California Driver’s License valid for the operation of any vehicle or equipment required to maintain and operate. Salary and Benefits Starting salary placement depends on qualifications and experience and is anticipated to be in the range of $5,787 to $6,076 a month. This is a full time, non-exempt position, which will lead toward permanent status following the successful completion of a probationary period. This position is eligible for a broad range of benefits, including medical, dental, vision, life and disability insurances, retirement (CalPERS), tuition waiver, vacation and sick leave. In addition, 15 paid holidays are offered each year. Sonoma State University is also a Public Service Loan Forgiveness Program (PSLF) Employer. A comprehensive benefits summary for this position is available online by clicking here to be taken to the CSU benefits page. Supplemental Information Sonoma State University is committed to achieving excellence through teaching, scholarship, learning and inclusion. In line with our Strategic Plan and our Seawolf Commitment, our values include diversity, sustainability, community engagement, respect, responsibility, excellence and integrity. We strive to cultivate a community in which a diverse population can learn and work in an atmosphere of civility and respect. We encourage innovation, experimentation and creativity, as well as contributions to equity and inclusion, in the pursuit of excellence for all members of our university community. The University is an Affirmative Action/Equal Opportunity Employer. We consider qualified applicants for employment without regard to race, religion, color, national origin, ancestry, age, sex, gender, gender identity, gender expression, sexual orientation, genetic information, medical condition, disability, marital status, or protected veteran status. Mandated Reporting: This position may be considered a "mandated reporter" under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. Per the CSU COVID-19 Vaccination Policy , it is strongly recommended that all faculty, staff, administrators, and students who are accessing campus facilities follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications. Any candidates advanced in a currently open search process should be prepared to continue to help us protect and maintain a healthy Seawolf Community. More information related to campus level requirements can be found here: https://risk.sonoma.edu/covid- compliance-and-monitoring- office . CSU Out of State Policy - Sonoma State University, as part of the CSU system, is a State of California Employer. As such, the University requires all employees upon date of hire to reside in the State of California. As of January 1, 2022 the CSU Out-of-State Employment Policy prohibits the hiring of employees to perform CSU-related work outside the state of California. A background check (including a criminal records check) must be completed satisfactorily before any candidate can be offered a position. Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current employees who apply for this position. Sonoma State University is not a sponsoring agency for staff positions (i.e. H-1B visas). Positions are posted for a minimum of 14 calendar days. For questions related to the application process, please reach out to hr@sonoma.edu . The ADA Coordinator is also available ( hraccommodations@sonoma.edu ) to assist individuals with disabilities in need of accommodation during the hiring process. Sonoma State University's Annual Security Report includes summaries of institutional policy relating to campus safety, drug and alcohol use, sexual assault, and other matters. The report is published in compliance with the Clery Act and includes three years of certain crime statistics that occurred in Clery Act defined geography. A paper copy of the report may be requested in person by emailing the Clery Compliance and Safety Office at clery@sonoma.edu . Pursuant to the Higher Education Opportunity Act, the Annual Fire Safety Report (AFSR) is available for viewing at https://housing.sonoma.edu/ resources/fire-safety . The purpose of this report is to disclose statistics for fires that occurred within Sonoma State University student housing facilities for three years, and to distribute fire safety policies and procedures intended to promote safety on campus. A paper copy of the AFSR is available upon request by contacting the Residential Education and Campus Housing at housing@sonoma.edu . Advertised: Mar 11 2024 Pacific Daylight Time Applications close: Closing Date/Time:
Irvine Ranch Water District, CA
Irvine, California, United States
General Description We are excited to announce that we are accepting applications for a Temporary Maintenance Mechanic position in Mechanical Services. The District Irvine Ranch Water District (IRWD) is a progressive, values-driven agency, with an international reputation for its leading-edge financial management practices, water recycling program, water use efficiency practices, water banking, urban runoff treatment, and energy generation and storage. Established in 1961 as a California Water District under the provisions of the California Water Code, IRWD is an independent special district serving central Orange County. IRWD provides high-quality drinking water, reliable sewage collection and treatment, ground-breaking recycled water programs, and environmentally sound urban runoff treatment to its customers. As an independent, not-for-profit public agency, IRWD is governed by a publicly elected five-member Board of Directors. The Board is responsible for the District's policies and decision-making. Day-to-day operations are supervised by the General Manager. Additional information can be found at the District's website: www.IRWD.com. The Position The incumbent at this position will under general supervision, install, maintain/service and assist in the overhauls of all District stationary rotating equipment related to domestic and reclaimed water distribution systems, sewage collections systems, wastewater/water treatment plants and dewatering/solids handling. Perform predictive (condition based monitoring) and preventive maintenance routes in a computerized environment. Summary of Duties Install, dismantle, overhaul, and repair waterworks machinery and equipment, including pumps, motors, engines, compressors, gear drive units, piping, valves, and related equipment. Perform repairs and modifications while providing training to apprentice level personnel. Prepare reports, summarizing the District's mechanical maintenance functions including labor, work performed, and materials used. Provide feedback on work performed. Perform Mechanical Predictive Maintenance/ Machinery Condition Monitoring routes. Utilize computer-based machinery analyzers as directed by senior level personnel for efficiency testing, tribology, thermography, and tri-axial vibration analysis. Possess knowledge and experience to properly and safely maintain District chemical, chlorination, and disinfection systems. Identify source(s) of existing or potential mechanical problems with systems, techniques, parts and equipment and work efficiently to correct, troubleshoot and diagnose various equipment malfunctions. Read and interpret blueprints, schematics, installation manuals, and follow written and verbal instructions. Ability to make rough drawings. Perform basic maintenance and repair operations using welding/machining skills required in Mechanical Services functions. Respond to emergency situations during off-hours as required. Troubleshoot the cause of malfunctions using visual inspection, precision measuring and test instruments. Perform beginning horizontal welding and machining. Adept in basic fabrication and silver soldering, and braising. Basic use of oxy-acetylene, and arc welders on ferrous and nonferrous metals; makes cuts using a band saw; and performs simple parts fabrication. Perform routine mechanical maintenance functions such as pump/motor, air compressor, engine and gear drive services. Assist in installing, dismantling, overhauling, and repair all waterworks machinery and equipment, including pumps, motors, engines, compressors, gear drive units, piping, valves, conveyors, and related equipment/appurtenances. Use shop cutting, grinding, bending, pressing, and drilling tools. Have basic knowledge of machine shop practices. Perform daily/weekly shop, tool, and vehicle maintenance/clean up. Submit purchase requests for materials and tools via an Oracle network system. Monitor spare parts and daily expendables inventory. Assist in ensuring inventory is maintained at an acceptable level via purchase orders. Check shipments to ensure they are complete and correct, then administrate correct storage. Suggest changes in work plans, and provide work-in-progress reports. Use Computerized Maintenance Management System, Oracle network, and Microsoft Office Suite. Create reports based on equipment condition and maintenance records. Assist in presenting Department safety meetings. Respond to emergency situations during off-hours as required. Participate on process teams and committees. Comply with District safety work-related practices and attend relevant safety training. Responsible for all other work related duties. Qualifications Education: High School graduation or equivalent required. For degrees obtained outside of the U.S., an official equivalency evaluation is required. Completion of a formal Apprenticeship Program and/or Collections System Maintenance and Water Distribution Certifications highly desirable. Completion of 21 field related college units or hold an accredited college Certificate in Mechanical/Electrical Maintenance highly desired. Experience: Minimum of two (2) years of apprentice level experience in a job requiring the application of mechanical skills in a water/wastewater treatment plant, water distribution system or similar environment preferred. License and Certifications: Valid Class 'C' California Driver's License required. Valid Class 'A' California Driver's License highly desired. HAZMAT DMV endorsement, and/or a National Commission for the Certification of Crane Operators (NCCO) certification highly desired. CWEA Grade I Plant Maintenance Technologist Certificate desired. Additional Information IRWD Corporate Values Irvine Ranch Water District believes that its values drive the character, culture, and capacity of our organization. IRWD was built on values, and we weave them into the fabric of everything we do. Values are the ingredients in our recipe for both institutional and individual success. They are a code of conduct to promote positive outcomes for others and ourselves. They are more than words on a wall or a website. We live by them every day. We pledge to keep them relevant in an ever-changing world. IRWD's employees enjoy working in a safe, supportive, and nurturing environment where they form strong bonds with fellow employees. To ensure effective communication and promote a collaborative team environment, employees report to work each day in the office or in the field, depending on their positions. The physical and mental demands described below are representative of those that must be met by employees to successfully perform the essential functions of this class. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Language Ability and Interpersonal Communication Ability to effectively communicate both oral and written. Ability to communicate effectively with all levels of office/field employees, management and vendors. Represent District in a professional manner when dealing with outside suppliers and customers. Ability to advise and provide interpretation to others on how to apply policies, procedures and standards to specific situations. Mathematical Ability Ability to perform basic mathematical functions, including algebra and geometry. Must be able to perform dimension analysis, and basic water math/hydraulic calculations. Technology Ability Proficient in the use of MS Office Suite (Word, Excel). Keyboarding abilities sufficient to perform the job. Judgment and Situational Reasoning Ability Ability to use good personal judgment and discretion in performing all job functions. Physical Requirements Will lift 50 lbs. on a routine basis. Must be certified annually to wear respiratory equipment. Must be clean-shaven such that facial hair does not interfere with the fit of a tight-fitting respirator. Ability to exert moderately heavy physical effort in moderate to heavy work, typically involving some combination of climbing and balancing, stooping, kneeling, crouching, crawling, lifting, carrying, pushing, and pulling. Ability to operate heavy equipment and machinery with some requiring complex and rapid adjustments, such as power hand and shop tools, mechanic's hand tools, shovel, motor vehicles, compressors, hoists, ladders, drafting tools, etc. Environmental Adaptability Ability to work under sometimes uncomfortable conditions with exposure to environmental factors such as toxic agents, wildlife, disease, or equipment, traffic, or machinery. IRWD offers a comprehensive benefits package for eligible employees and their eligible dependents. These benefits include the following: retirement benefits; medical, dental, vision, and life insurance; anda variety of other benefits. Benefits may vary based on employment status. This benefits overview is intended to be a summary, is not intended to be all-inclusive,and may not be applicable to all employees. Retirement Employees hired on or after January 1, 2013: The District, in compliance with the California Public Employees' Pension Reform Act of 2012 (PEPRA), implemented a third tier for new employees hired on or after January 1, 2013. New employees hired on or after January 1, 2013 who have not been in PERS membership or in membership with a reciprocal retirement system within 6 months of hire date will receive benefits under the California Public Employees Retirement System at a 2 percent at age 62 formula. This formula gradually increases to a maximum benefits of 2.5 percent at age 67. Final compensation calculations will be based on the highest three-year average of regular recurring pay. The District pays the employer's share of these costs. The employee share of the pension cost of 7.50% is paid in full by the employees hired under this formula. Employees hired on or after September 29, 2012 or "Classic" PERS members hired on or after January 1, 2013: On September 24, 2012, the IRWD Board of Directors approved the addition of a second tier to the CalPERS retirement benefits. New employees hired on or after September 29th through December 31, 2012, and employees hired on or after January 1, 2013 who have been in PERS membership or in membership with a reciprocal retirement system, will receive benefits under the California Public Employees Retirement System at 2 percent at age 60 formula. This formula gradually increases to a maximum benefit of 2.418% at age 63. The District pays the employer share of these costs and the employee share of the pension cost of 7% is paid in full by the employees hired under this formula. Final retirement compensation calculations are based on the highest three-year average of regular, recurring pay. IRWDdoes not participate or pay into Social Security except for the Medicare portion. Medical Insurance IRWD contracts with CalPERS for medical insurance coverage. Employees may elect coverage from a variety of PPO and HMO plans. The employee and District contribution for health insurance varies by plan.Coverage is effective the first day of the month following the date of hire. Dental Insurance IRWD contracts with Delta Dental for dental coverage.IRWD pays 100% of the premium for dental coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Vision Insurance IRWD contracts with the EyeMed for vision coverage. IRWD pays 100% of the premium for vision coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Life Insurance Elgible employees are provided with life insurance coverage equal to three or four times their annual salary, depending on their level of compensation. Eligible dependents are also covered for a flat benefit amount. Coverage is effective the first day of the month following the date of hire. Deferred Compensation Participation in adeferred compensation plan is available through Empower Retirement. Enrollment is voluntary and contributions are employee-paid and subject to IRS limits. The District matches employee contributions up to 3% of base pay after 1 year of employment. Paid Vacation Eligible employees begin accruing vacation benefits at the rate of 80 hours per year for the first 5 years of employment and are eligible to use paid vacation time after 6 months of employment. Employees accrue 120 hours per year after 5 years of employment and 160 hours per year after 10 years of employment. Paid Holidays The District offers 11 scheduled paid holidaysplus one personal holiday per year. Sick Leave Eligible employees accrue 96 hours of sick leave annually. Flexible Spending Accounts Eligible employees may elect to participate in the District's Flex Advantage program. This program allows employees to deposit pre-tax dollars into special accounts to be used for a variety of purposes, including paying for qualified miscellaneous health care expenses and dependent care expenses. IRWD contracts with a third party administer to process payments from employee accounts using claim forms or a Flex Spending debit card. Educational Assistance The District will share in the pre-approved educational costs of tuition and books for employees who wish to attend college or take certification classes. Closing Date/Time: Continuous
Mar 08, 2024
Full Time
General Description We are excited to announce that we are accepting applications for a Temporary Maintenance Mechanic position in Mechanical Services. The District Irvine Ranch Water District (IRWD) is a progressive, values-driven agency, with an international reputation for its leading-edge financial management practices, water recycling program, water use efficiency practices, water banking, urban runoff treatment, and energy generation and storage. Established in 1961 as a California Water District under the provisions of the California Water Code, IRWD is an independent special district serving central Orange County. IRWD provides high-quality drinking water, reliable sewage collection and treatment, ground-breaking recycled water programs, and environmentally sound urban runoff treatment to its customers. As an independent, not-for-profit public agency, IRWD is governed by a publicly elected five-member Board of Directors. The Board is responsible for the District's policies and decision-making. Day-to-day operations are supervised by the General Manager. Additional information can be found at the District's website: www.IRWD.com. The Position The incumbent at this position will under general supervision, install, maintain/service and assist in the overhauls of all District stationary rotating equipment related to domestic and reclaimed water distribution systems, sewage collections systems, wastewater/water treatment plants and dewatering/solids handling. Perform predictive (condition based monitoring) and preventive maintenance routes in a computerized environment. Summary of Duties Install, dismantle, overhaul, and repair waterworks machinery and equipment, including pumps, motors, engines, compressors, gear drive units, piping, valves, and related equipment. Perform repairs and modifications while providing training to apprentice level personnel. Prepare reports, summarizing the District's mechanical maintenance functions including labor, work performed, and materials used. Provide feedback on work performed. Perform Mechanical Predictive Maintenance/ Machinery Condition Monitoring routes. Utilize computer-based machinery analyzers as directed by senior level personnel for efficiency testing, tribology, thermography, and tri-axial vibration analysis. Possess knowledge and experience to properly and safely maintain District chemical, chlorination, and disinfection systems. Identify source(s) of existing or potential mechanical problems with systems, techniques, parts and equipment and work efficiently to correct, troubleshoot and diagnose various equipment malfunctions. Read and interpret blueprints, schematics, installation manuals, and follow written and verbal instructions. Ability to make rough drawings. Perform basic maintenance and repair operations using welding/machining skills required in Mechanical Services functions. Respond to emergency situations during off-hours as required. Troubleshoot the cause of malfunctions using visual inspection, precision measuring and test instruments. Perform beginning horizontal welding and machining. Adept in basic fabrication and silver soldering, and braising. Basic use of oxy-acetylene, and arc welders on ferrous and nonferrous metals; makes cuts using a band saw; and performs simple parts fabrication. Perform routine mechanical maintenance functions such as pump/motor, air compressor, engine and gear drive services. Assist in installing, dismantling, overhauling, and repair all waterworks machinery and equipment, including pumps, motors, engines, compressors, gear drive units, piping, valves, conveyors, and related equipment/appurtenances. Use shop cutting, grinding, bending, pressing, and drilling tools. Have basic knowledge of machine shop practices. Perform daily/weekly shop, tool, and vehicle maintenance/clean up. Submit purchase requests for materials and tools via an Oracle network system. Monitor spare parts and daily expendables inventory. Assist in ensuring inventory is maintained at an acceptable level via purchase orders. Check shipments to ensure they are complete and correct, then administrate correct storage. Suggest changes in work plans, and provide work-in-progress reports. Use Computerized Maintenance Management System, Oracle network, and Microsoft Office Suite. Create reports based on equipment condition and maintenance records. Assist in presenting Department safety meetings. Respond to emergency situations during off-hours as required. Participate on process teams and committees. Comply with District safety work-related practices and attend relevant safety training. Responsible for all other work related duties. Qualifications Education: High School graduation or equivalent required. For degrees obtained outside of the U.S., an official equivalency evaluation is required. Completion of a formal Apprenticeship Program and/or Collections System Maintenance and Water Distribution Certifications highly desirable. Completion of 21 field related college units or hold an accredited college Certificate in Mechanical/Electrical Maintenance highly desired. Experience: Minimum of two (2) years of apprentice level experience in a job requiring the application of mechanical skills in a water/wastewater treatment plant, water distribution system or similar environment preferred. License and Certifications: Valid Class 'C' California Driver's License required. Valid Class 'A' California Driver's License highly desired. HAZMAT DMV endorsement, and/or a National Commission for the Certification of Crane Operators (NCCO) certification highly desired. CWEA Grade I Plant Maintenance Technologist Certificate desired. Additional Information IRWD Corporate Values Irvine Ranch Water District believes that its values drive the character, culture, and capacity of our organization. IRWD was built on values, and we weave them into the fabric of everything we do. Values are the ingredients in our recipe for both institutional and individual success. They are a code of conduct to promote positive outcomes for others and ourselves. They are more than words on a wall or a website. We live by them every day. We pledge to keep them relevant in an ever-changing world. IRWD's employees enjoy working in a safe, supportive, and nurturing environment where they form strong bonds with fellow employees. To ensure effective communication and promote a collaborative team environment, employees report to work each day in the office or in the field, depending on their positions. The physical and mental demands described below are representative of those that must be met by employees to successfully perform the essential functions of this class. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Language Ability and Interpersonal Communication Ability to effectively communicate both oral and written. Ability to communicate effectively with all levels of office/field employees, management and vendors. Represent District in a professional manner when dealing with outside suppliers and customers. Ability to advise and provide interpretation to others on how to apply policies, procedures and standards to specific situations. Mathematical Ability Ability to perform basic mathematical functions, including algebra and geometry. Must be able to perform dimension analysis, and basic water math/hydraulic calculations. Technology Ability Proficient in the use of MS Office Suite (Word, Excel). Keyboarding abilities sufficient to perform the job. Judgment and Situational Reasoning Ability Ability to use good personal judgment and discretion in performing all job functions. Physical Requirements Will lift 50 lbs. on a routine basis. Must be certified annually to wear respiratory equipment. Must be clean-shaven such that facial hair does not interfere with the fit of a tight-fitting respirator. Ability to exert moderately heavy physical effort in moderate to heavy work, typically involving some combination of climbing and balancing, stooping, kneeling, crouching, crawling, lifting, carrying, pushing, and pulling. Ability to operate heavy equipment and machinery with some requiring complex and rapid adjustments, such as power hand and shop tools, mechanic's hand tools, shovel, motor vehicles, compressors, hoists, ladders, drafting tools, etc. Environmental Adaptability Ability to work under sometimes uncomfortable conditions with exposure to environmental factors such as toxic agents, wildlife, disease, or equipment, traffic, or machinery. IRWD offers a comprehensive benefits package for eligible employees and their eligible dependents. These benefits include the following: retirement benefits; medical, dental, vision, and life insurance; anda variety of other benefits. Benefits may vary based on employment status. This benefits overview is intended to be a summary, is not intended to be all-inclusive,and may not be applicable to all employees. Retirement Employees hired on or after January 1, 2013: The District, in compliance with the California Public Employees' Pension Reform Act of 2012 (PEPRA), implemented a third tier for new employees hired on or after January 1, 2013. New employees hired on or after January 1, 2013 who have not been in PERS membership or in membership with a reciprocal retirement system within 6 months of hire date will receive benefits under the California Public Employees Retirement System at a 2 percent at age 62 formula. This formula gradually increases to a maximum benefits of 2.5 percent at age 67. Final compensation calculations will be based on the highest three-year average of regular recurring pay. The District pays the employer's share of these costs. The employee share of the pension cost of 7.50% is paid in full by the employees hired under this formula. Employees hired on or after September 29, 2012 or "Classic" PERS members hired on or after January 1, 2013: On September 24, 2012, the IRWD Board of Directors approved the addition of a second tier to the CalPERS retirement benefits. New employees hired on or after September 29th through December 31, 2012, and employees hired on or after January 1, 2013 who have been in PERS membership or in membership with a reciprocal retirement system, will receive benefits under the California Public Employees Retirement System at 2 percent at age 60 formula. This formula gradually increases to a maximum benefit of 2.418% at age 63. The District pays the employer share of these costs and the employee share of the pension cost of 7% is paid in full by the employees hired under this formula. Final retirement compensation calculations are based on the highest three-year average of regular, recurring pay. IRWDdoes not participate or pay into Social Security except for the Medicare portion. Medical Insurance IRWD contracts with CalPERS for medical insurance coverage. Employees may elect coverage from a variety of PPO and HMO plans. The employee and District contribution for health insurance varies by plan.Coverage is effective the first day of the month following the date of hire. Dental Insurance IRWD contracts with Delta Dental for dental coverage.IRWD pays 100% of the premium for dental coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Vision Insurance IRWD contracts with the EyeMed for vision coverage. IRWD pays 100% of the premium for vision coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Life Insurance Elgible employees are provided with life insurance coverage equal to three or four times their annual salary, depending on their level of compensation. Eligible dependents are also covered for a flat benefit amount. Coverage is effective the first day of the month following the date of hire. Deferred Compensation Participation in adeferred compensation plan is available through Empower Retirement. Enrollment is voluntary and contributions are employee-paid and subject to IRS limits. The District matches employee contributions up to 3% of base pay after 1 year of employment. Paid Vacation Eligible employees begin accruing vacation benefits at the rate of 80 hours per year for the first 5 years of employment and are eligible to use paid vacation time after 6 months of employment. Employees accrue 120 hours per year after 5 years of employment and 160 hours per year after 10 years of employment. Paid Holidays The District offers 11 scheduled paid holidaysplus one personal holiday per year. Sick Leave Eligible employees accrue 96 hours of sick leave annually. Flexible Spending Accounts Eligible employees may elect to participate in the District's Flex Advantage program. This program allows employees to deposit pre-tax dollars into special accounts to be used for a variety of purposes, including paying for qualified miscellaneous health care expenses and dependent care expenses. IRWD contracts with a third party administer to process payments from employee accounts using claim forms or a Flex Spending debit card. Educational Assistance The District will share in the pre-approved educational costs of tuition and books for employees who wish to attend college or take certification classes. Closing Date/Time: Continuous
City of McKinney, TX
McKinney, Texas, United States
Summary WORKING FOR THE CITY OF MCKINNEY Working for the City of McKinney is more than a job. It is an opportunity to make a meaningful difference in the lives of others. It is also an opportunity to have a hand in the development of one of the fastest growing communities in the nation. In 2014, our community was named “The #1 Best Place to Live in America.” Although proud of that honor, everyone on our team is committed to making McKinney an even better place to live, work and raise a family. That’s why we exist. OUR CORE VALUES City of McKinney employees work hard and at a very fast pace. However, we also look after and support one another. All of us are guided by four employee-inspired values - Respect, Integrity, Service, and Excellence (RISE). We are also supported by servant-based leaders who foster and support a healthy, family-oriented culture. All new employees are expected to embrace and live by our core values and commit to helping us sustain our exceptional work environment as a high performance organization (HPO). SUMMARY OF POSITION Under general supervision, the Facilities Maintenance Mechanic II is responsible for performing general maintenance and repair of assigned City owned or leased buildings and facilities. This is a journey-level classification in the Facilities Maintenance Mechanical series that follows diversified procedures and implements processes to accomplish end results, within guidelines. Immediate supervision is available upon request. This class is distinguished from Facilities Maintenance Mechanic Senior in that the latter is a higher-level class in the series that performs complex technical, investigative, and supervisory duties requiring a higher level of knowledge and skill. Essential Functions/Knowledge, Skills, & Abilities GENERAL EXPECTATIONS FOR ALL EMPLOYEES In order for us to continue to achieve our primary function of making McKinney a better place to live, work, and raise a family, we hold these expectations for all employees. Learn and demonstrate an understanding of how team, department, and City goals are interconnected. Contribute to a positive work culture. Maintain regular and reliable attendance. Ability to assess his/her work performance or the work performance of the team. Contribute to the development of others and/or the working unit or overall organization. Ability and willingness to work as part of a team, to demonstrate team skills, and to perform a fair share of team responsibilities. Ability to continuously learn and develop through a mix of internal and external training opportunities, and if applicable, encourage subordinates to do the same. ESSENTIAL DUTIES AND RESPONSIBILITIES Performs general maintenance and repair of assigned facilities, including plumbing repair and installation, carpentry, minor electrical repair and maintenance, minor repair and maintenance of heating, ventilation and air conditioning (HVAC) systems, furniture repair, painting, appliance repair and installation and locksmith. Provides assistance to the electrician or HVAC technician with required installation, maintenance or repair of equipment. Completes general construction and remodeling work. Inspects construction work. Perform scheduled preventive maintenance services at City facilities. Maintain records of work activities and supplies, parts and materials used. May assist in obtaining bids and entering information into computer system. Diagnose defective operations and excessive wear of mechanical equipment. Identify abnormal readings or trends in data collected from gauges, meters, dials, and instruments. Apply standard knowledge of various building trades, identify potential safety hazards & recommend solutions. When assigned to Parking Lot Paint parking striping and maintain clear delineation of parking spaces. Paint fire lanes, handicap decals, and other required markings. Keep the parking lots and surrounding areas clean and free of debris through regular trash pickup. Perform grass and weed care in grassy area adjacent to parking lots. Maintain parking lot pole lighting, including changing ballasts, replacing bulbs, and painting poles. Address lighting issues promptly, sometimes requiring the replacement of the entire pole or fixture. Handle wall mount building lighting maintenance as needed. Safely operate scissor lift and reach lift to perform duties in elevated areas. Ensure proper functionality and aesthetic appeal by regularly maintaining bollards and wheel stops. Regularly inspect, maintain, and clean areas in and around dumpster enclosures. Ensure electric car chargers are in working condition and address any malfunctions. Fill in potholes and repair damaged areas of the parking lots. Oversee and manage contract work, acquiring quotes, and ensure quality work within budget constraints. Collaborate with city purchasing and finance department for procurement and contract-related activities. Keep track of work orders including labor equipment and material within Cityworks. OTHER JOB FUNCTIONS: Will be required to work on-call. Perform other duties as assigned or directed. KNOWLEDGE, SKILLS, ABILITIES, AND BEHAVIORS Ability to embrace and embody the City’s core values of Respect, Integrity, Service, and Excellence (R.I.S.E.). Ability to communicate effectively with peers, supervisors, subordinates, and people to whom service is provided. Ability to produce desired work outcomes, including quality, quantity, and timeliness. Ability to plan and organize work, time, and resources, and if applicable, that of subordinates. Requires technical education, certifications, licenses, previous job experience to perform the essential duties and responsibilities with minimal supervision i.e. electrical maintenance, HVAC repairs, appliance repairs, etc. Requires the ability provide guidance, assistance, and/or interpretation to others on how to apply procedures and standards to specific situations. Requires the ability to operate, maneuver and/or control the actions of equipment, machinery, tools, and/or materials used in performing essential functions. Requires the ability to utilize a wide variety of descriptive data and information, such as electrical diagrams, work orders, policy manuals, and equipment instructions. Requires ability to carry out instructions furnished in written, oral, or diagrammatic form. Involves semi-routine standardized work with some latitude for independent judgment concerning choices of action. Requires the ability to exercise the judgment required in situations characterized by repetitive or short cycle operations covered by set procedures or sequences. Requires the ability to perform coordinated movements involving placing and turning motions, such as operating a tractor, drill press, handheld radio, table saw, and computer terminal. Basic knowledge of data entry, MS word, & MS excel, the ability to learn the current Work Order System (Cityworks) and the ability to learn the Tracer Summit HVAC Control System. Knowledge of routine construction, maintenance, and repair methods; painting methods and materials. Knowledge of electrical codes applicable to the installation, maintenance and repair of electrical circuits and wiring systems. Routine maintenance and repair methods of heating ventilation and air conditioning systems. Completing preventive and minor maintenance and repair on buildings and equipment. Ability to work in a stressful environment. Build professional relationships with internal staff and customers. Offer flexibility and adaptability, especially during times of change. Required Qualifications MINIMUM QUALIFICATIONS Any work related experience resulting in acceptable proficiency levels in the below Minimum Qualifications may be an acceptable substitute for the below specified education and experience requirements. High school diploma or GED equivalent supplemented by two (2) years of experience in general maintenance and repair of buildings and facilities. CONDITIONS OF EMPLOYMENT Must have Class C Texas Driver’s License. Must pass a drug screen and background check. Periodic CJIS background check. Must possess CFC Reclamation and Recycling License Type I and II, and Mobile air conditioning, or ability to obtain within six (6) months from hire date. May require additional technical education, certification and license upon appointment. Physical Demands/Supplemental PHYSICAL DEMANDS Tasks involve the ability to exert heavy physical effort in heavy work, with greater emphasis on climbing and balancing, but typically also involving some combination of stooping, kneeling, crouching, and crawling, and the lifting, carrying, pushing, and/or pulling of moderately heavy objects and materials (20-50 pounds); may occasionally involve heavier objects and materials (up to 100 pounds). Some tasks require visual and odor perception and discrimination. WORK ENVIRONMENT Tasks may risk exposure to extreme cold/heat or extreme weather conditions, strong odors or smoke, dust or pollen, and toxic chemicals. The above statements describe the general nature and level of work being performed as of the date of preparation and approval. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of the position. Employees holding this position will be required to perform any other job-related duties as requested by management. The job description does not constitute an employment agreement between the employer and employee, and all requirements are subject to possible modification to reasonably accommodate individuals with disabilities. The City of McKinney is an equal opportunity employer (EOE) committed to an alcohol / drug free workplace and to providing equal opportunities regardless of age, race, color, gender, religion, national origin, marital status, veteran status, disability or any other legally protected status. The City offers a full complement of benefits: Health Insurance Medical, Dental, Vision Insurance Health Savings Account (HSA), Flexible Spending Medical and Childcare Account (FSA) Mental Health Care and Employee Assistance Program (EAP) City-paid and VoluntaryLifeInsurance City-paid and VoluntaryLong Term Disability Insurance Supplemental Insurance through Aflac Additional Benefits Legal Services through Legal Shield Tuition Reimbursement (up to $10,000 per year) Wellness Program (earn up to $600 per year) Retirement Texas Municipal Retirement System (TMRS) Mandatory 7% employee contribution City match 2:1 5 year vesting Retire after 20 years of service, or age 60 with 5 years of service 457(b) Deferred Compensation Plans Paid Time Off (PTO) Paid Vacation (80 hours per year for new hires; tieredincreases after 2 yrs) Sick Leave (135 hours per year for yourself and immediate family) Paid Parental Leave (80 hours for birth, adoption, or placement of a child in foser care) Ten Paid Holidays Personal Day Optional compensatory time for hourly employees Compensatory time for salaried employees For more detailed information, please see the City of McKinney's summary of benefits . Closing Date/Time: 4/27/2024 5:00 PM Central
Mar 28, 2024
Full Time
Summary WORKING FOR THE CITY OF MCKINNEY Working for the City of McKinney is more than a job. It is an opportunity to make a meaningful difference in the lives of others. It is also an opportunity to have a hand in the development of one of the fastest growing communities in the nation. In 2014, our community was named “The #1 Best Place to Live in America.” Although proud of that honor, everyone on our team is committed to making McKinney an even better place to live, work and raise a family. That’s why we exist. OUR CORE VALUES City of McKinney employees work hard and at a very fast pace. However, we also look after and support one another. All of us are guided by four employee-inspired values - Respect, Integrity, Service, and Excellence (RISE). We are also supported by servant-based leaders who foster and support a healthy, family-oriented culture. All new employees are expected to embrace and live by our core values and commit to helping us sustain our exceptional work environment as a high performance organization (HPO). SUMMARY OF POSITION Under general supervision, the Facilities Maintenance Mechanic II is responsible for performing general maintenance and repair of assigned City owned or leased buildings and facilities. This is a journey-level classification in the Facilities Maintenance Mechanical series that follows diversified procedures and implements processes to accomplish end results, within guidelines. Immediate supervision is available upon request. This class is distinguished from Facilities Maintenance Mechanic Senior in that the latter is a higher-level class in the series that performs complex technical, investigative, and supervisory duties requiring a higher level of knowledge and skill. Essential Functions/Knowledge, Skills, & Abilities GENERAL EXPECTATIONS FOR ALL EMPLOYEES In order for us to continue to achieve our primary function of making McKinney a better place to live, work, and raise a family, we hold these expectations for all employees. Learn and demonstrate an understanding of how team, department, and City goals are interconnected. Contribute to a positive work culture. Maintain regular and reliable attendance. Ability to assess his/her work performance or the work performance of the team. Contribute to the development of others and/or the working unit or overall organization. Ability and willingness to work as part of a team, to demonstrate team skills, and to perform a fair share of team responsibilities. Ability to continuously learn and develop through a mix of internal and external training opportunities, and if applicable, encourage subordinates to do the same. ESSENTIAL DUTIES AND RESPONSIBILITIES Performs general maintenance and repair of assigned facilities, including plumbing repair and installation, carpentry, minor electrical repair and maintenance, minor repair and maintenance of heating, ventilation and air conditioning (HVAC) systems, furniture repair, painting, appliance repair and installation and locksmith. Provides assistance to the electrician or HVAC technician with required installation, maintenance or repair of equipment. Completes general construction and remodeling work. Inspects construction work. Perform scheduled preventive maintenance services at City facilities. Maintain records of work activities and supplies, parts and materials used. May assist in obtaining bids and entering information into computer system. Diagnose defective operations and excessive wear of mechanical equipment. Identify abnormal readings or trends in data collected from gauges, meters, dials, and instruments. Apply standard knowledge of various building trades, identify potential safety hazards & recommend solutions. When assigned to Parking Lot Paint parking striping and maintain clear delineation of parking spaces. Paint fire lanes, handicap decals, and other required markings. Keep the parking lots and surrounding areas clean and free of debris through regular trash pickup. Perform grass and weed care in grassy area adjacent to parking lots. Maintain parking lot pole lighting, including changing ballasts, replacing bulbs, and painting poles. Address lighting issues promptly, sometimes requiring the replacement of the entire pole or fixture. Handle wall mount building lighting maintenance as needed. Safely operate scissor lift and reach lift to perform duties in elevated areas. Ensure proper functionality and aesthetic appeal by regularly maintaining bollards and wheel stops. Regularly inspect, maintain, and clean areas in and around dumpster enclosures. Ensure electric car chargers are in working condition and address any malfunctions. Fill in potholes and repair damaged areas of the parking lots. Oversee and manage contract work, acquiring quotes, and ensure quality work within budget constraints. Collaborate with city purchasing and finance department for procurement and contract-related activities. Keep track of work orders including labor equipment and material within Cityworks. OTHER JOB FUNCTIONS: Will be required to work on-call. Perform other duties as assigned or directed. KNOWLEDGE, SKILLS, ABILITIES, AND BEHAVIORS Ability to embrace and embody the City’s core values of Respect, Integrity, Service, and Excellence (R.I.S.E.). Ability to communicate effectively with peers, supervisors, subordinates, and people to whom service is provided. Ability to produce desired work outcomes, including quality, quantity, and timeliness. Ability to plan and organize work, time, and resources, and if applicable, that of subordinates. Requires technical education, certifications, licenses, previous job experience to perform the essential duties and responsibilities with minimal supervision i.e. electrical maintenance, HVAC repairs, appliance repairs, etc. Requires the ability provide guidance, assistance, and/or interpretation to others on how to apply procedures and standards to specific situations. Requires the ability to operate, maneuver and/or control the actions of equipment, machinery, tools, and/or materials used in performing essential functions. Requires the ability to utilize a wide variety of descriptive data and information, such as electrical diagrams, work orders, policy manuals, and equipment instructions. Requires ability to carry out instructions furnished in written, oral, or diagrammatic form. Involves semi-routine standardized work with some latitude for independent judgment concerning choices of action. Requires the ability to exercise the judgment required in situations characterized by repetitive or short cycle operations covered by set procedures or sequences. Requires the ability to perform coordinated movements involving placing and turning motions, such as operating a tractor, drill press, handheld radio, table saw, and computer terminal. Basic knowledge of data entry, MS word, & MS excel, the ability to learn the current Work Order System (Cityworks) and the ability to learn the Tracer Summit HVAC Control System. Knowledge of routine construction, maintenance, and repair methods; painting methods and materials. Knowledge of electrical codes applicable to the installation, maintenance and repair of electrical circuits and wiring systems. Routine maintenance and repair methods of heating ventilation and air conditioning systems. Completing preventive and minor maintenance and repair on buildings and equipment. Ability to work in a stressful environment. Build professional relationships with internal staff and customers. Offer flexibility and adaptability, especially during times of change. Required Qualifications MINIMUM QUALIFICATIONS Any work related experience resulting in acceptable proficiency levels in the below Minimum Qualifications may be an acceptable substitute for the below specified education and experience requirements. High school diploma or GED equivalent supplemented by two (2) years of experience in general maintenance and repair of buildings and facilities. CONDITIONS OF EMPLOYMENT Must have Class C Texas Driver’s License. Must pass a drug screen and background check. Periodic CJIS background check. Must possess CFC Reclamation and Recycling License Type I and II, and Mobile air conditioning, or ability to obtain within six (6) months from hire date. May require additional technical education, certification and license upon appointment. Physical Demands/Supplemental PHYSICAL DEMANDS Tasks involve the ability to exert heavy physical effort in heavy work, with greater emphasis on climbing and balancing, but typically also involving some combination of stooping, kneeling, crouching, and crawling, and the lifting, carrying, pushing, and/or pulling of moderately heavy objects and materials (20-50 pounds); may occasionally involve heavier objects and materials (up to 100 pounds). Some tasks require visual and odor perception and discrimination. WORK ENVIRONMENT Tasks may risk exposure to extreme cold/heat or extreme weather conditions, strong odors or smoke, dust or pollen, and toxic chemicals. The above statements describe the general nature and level of work being performed as of the date of preparation and approval. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of the position. Employees holding this position will be required to perform any other job-related duties as requested by management. The job description does not constitute an employment agreement between the employer and employee, and all requirements are subject to possible modification to reasonably accommodate individuals with disabilities. The City of McKinney is an equal opportunity employer (EOE) committed to an alcohol / drug free workplace and to providing equal opportunities regardless of age, race, color, gender, religion, national origin, marital status, veteran status, disability or any other legally protected status. The City offers a full complement of benefits: Health Insurance Medical, Dental, Vision Insurance Health Savings Account (HSA), Flexible Spending Medical and Childcare Account (FSA) Mental Health Care and Employee Assistance Program (EAP) City-paid and VoluntaryLifeInsurance City-paid and VoluntaryLong Term Disability Insurance Supplemental Insurance through Aflac Additional Benefits Legal Services through Legal Shield Tuition Reimbursement (up to $10,000 per year) Wellness Program (earn up to $600 per year) Retirement Texas Municipal Retirement System (TMRS) Mandatory 7% employee contribution City match 2:1 5 year vesting Retire after 20 years of service, or age 60 with 5 years of service 457(b) Deferred Compensation Plans Paid Time Off (PTO) Paid Vacation (80 hours per year for new hires; tieredincreases after 2 yrs) Sick Leave (135 hours per year for yourself and immediate family) Paid Parental Leave (80 hours for birth, adoption, or placement of a child in foser care) Ten Paid Holidays Personal Day Optional compensatory time for hourly employees Compensatory time for salaried employees For more detailed information, please see the City of McKinney's summary of benefits . Closing Date/Time: 4/27/2024 5:00 PM Central
Cal State University (CSU) San Francisco
1600 Holloway Avenue, San Francisco, CA 94132, USA
*Housing, Dining & Conference Services and Human Resources will not be accepting paper applications for this position.* Working Title Facilities Maintenance Mechanic Positions Available 16 Positions Available SF State University San Francisco State is an Equal Opportunity Employer and does not discriminate against persons on the basis of race, religion, color, ancestry, age, disability, genetic information, gender, gender identity, gender expression, marital status, medical condition, National origin, sex, sexual orientation, covered veteran status, or any other protected status. Reasonable accommodations will be provided for qualified applicants with disabilities who self-disclose by contacting the Senior Human Resources Manager. Applicants may visit titleix.sfsu.edu for more information on SF State's policy prohibiting discrimination, and how to file an online report using the procedures under Executive Order 1096 Revised. Inquiries can be directed to the campus Title IX Coordinator and Discrimination, Harassment, and Retaliation Administrator by calling (415) 338-2032 or emailing vpsaem@sfsu.edu. San Francisco State is a 100% Smoke/Vapor-Free Campus. Smoking or Vaping of any tobacco/plant-based substance is not permitted on any University properties. The person holding this position may be considered a "mandated reporter" under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. This position may be a "designated position" in the California State University's Conflict of Interest Code. The successful candidate accepting this position may be required to file Conflict of Interest forms subject to the regulations of the Fair Political Practices Commission. Department Housing, Dining & Conference Services (HDCS)-Facilities Maintenance Appointment Type Temporary: Position will begin May 1, 2024 and end on or before August 29, 2024. Permanent Status cannot be earned in this position. Time Base This is a hourly, intermittent, position with an anticipated 40 hour work week. Work Schedule Monday - Friday 7:00 AM-3:30 PM Anticipated Hiring Range $33.39 per hour Salary is commensurate with experience. Position Summary Under the direct supervision of the Facilities Project Supervisor, it is the primary responsibility of the Facilities Maintenance Mechanic to perform a variety of skilled preventive and general maintenance, repair, construction, and renovation work on the properties managed by Housing, Dining & Conference Services. Temporary: Position will end on or before August 29, 2024, permanent status cannot be earned in this position. Position Information Perform independently skilled preventive and general maintenance, repair, construction, and renovation work - Respond to routine maintenance and service requests - Preventative maintenance - Perform a wide range of facilities renovation, maintenance, and repair work - Use computerized maintenance systems Other duties as assigned Minimum Qualifications Knowledge: Work requires thorough knowledge of the methods, materials, equipment and tools used in one skilled trade area; working knowledge of materials, methods, equipment and tools in related trade areas pertaining to facilities, systems, construction and renovation; thorough knowledge of generally accepted trade practices in trade specialty; working knowledge of computerized maintenance and building automation systems; working knowledge of applicable building and safety codes and regulations related to facilities, systems and renovations. Abilities: Must be able to demonstrate journey-level skill in one trade and strong skills in other applicable trades; operate construction and related equipment; use considerable judgment and discretion in performing duties; read, interpret and work from blueprints, plans, drawings, and specifications; make rough sketches; estimate cost, time and materials of maintenance, repair and renovation work; maintain records and retrieve data related to work performed using manual and/or computerized record-keeping systems; prepare standard reports; provide instruction to unskilled and semi-skilled assistants; analyze and respond to emergency situations; read and write at a level appropriate to the position; and perform arithmetic calculations as required by the position. Experience: These abilities normally would be acquired through four years of increasingly responsible experience leading to journey-level skills in a mechanical or facilities/building trade, or any equivalent combination of training and experience as a facilities and systems mechanic which demonstrates the achievement of journey-level skills equivalent to that acquired through completion of an applicable apprenticeship program. Preferred Qualifications - Achievement of journey-level skills acquired through completion of an applicable apprenticeship program. - Experience working on single-family apartment complexes. Required License/Certification - Possess a valid non-restricted California Driver's License; comply with the Defensive Driver’s Training program requirements if a vehicle is used on official business. - The person holding this position is considered a 'mandated reporter' under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 Revised July 21, 2017 as a condition of employment. Environmental/Physical/Special May be required to work on weekends, some evening, overtime, call back and/or holidays. Position requires the use of a uniform that will be provided by the department and the ability to carry a department provided mobile phone and answer calls during the work schedule. Work schedule may change depending on the needs of the organization. Pre-Employment Requirements This position requires the successful completion of a background check. Eligibility to Work Applicants must be able to provide proof of US Citizenship or authorization to work in the United States, within three business days from their date of hire. Additional Information SF STATE IS NOT A SPONSORING AGENCY FOR STAFF OR MANAGEMENT POSITIONS. (i.e. H1-B VISAS). Thank you for your interest in employment with California State University (CSU). CSU is a state entity whose business operations reside within the State of California. Because of this, CSU prohibits hiring employees to perform CSU-related work outside of California with very limited exception. While this position may be eligible for occasional telework, all work is expected to be performed in the state of California, and this position is assigned to on-campus operations. CSU strongly encourages faculty, staff, and students who are accessing campus facilities to be immunized against COVID-19 or declare a medical or religious exemption from doing so. Any candidates advanced in a currently open search process are encouraged to comply with this requirement. The systemwide policy can be found at https://calstate.policystat.com/policy/9779821/latest/ and questions may be sent to hrwww@campus.edu. The Human Resources office is open Mondays through Fridays from 8 a.m. to 5 p.m., and can be reached at (415) 338-1872. Please note that this position, position requirements, application deadline and/or any other component of this position is subject to change or cancellation at any time. *Housing, Dining & Conference Services and Human Resources will not be accepting paper applications for this position.* Advertised: Apr 09 2024 Pacific Daylight Time Applications close: Closing Date/Time:
Mar 07, 2024
*Housing, Dining & Conference Services and Human Resources will not be accepting paper applications for this position.* Working Title Facilities Maintenance Mechanic Positions Available 16 Positions Available SF State University San Francisco State is an Equal Opportunity Employer and does not discriminate against persons on the basis of race, religion, color, ancestry, age, disability, genetic information, gender, gender identity, gender expression, marital status, medical condition, National origin, sex, sexual orientation, covered veteran status, or any other protected status. Reasonable accommodations will be provided for qualified applicants with disabilities who self-disclose by contacting the Senior Human Resources Manager. Applicants may visit titleix.sfsu.edu for more information on SF State's policy prohibiting discrimination, and how to file an online report using the procedures under Executive Order 1096 Revised. Inquiries can be directed to the campus Title IX Coordinator and Discrimination, Harassment, and Retaliation Administrator by calling (415) 338-2032 or emailing vpsaem@sfsu.edu. San Francisco State is a 100% Smoke/Vapor-Free Campus. Smoking or Vaping of any tobacco/plant-based substance is not permitted on any University properties. The person holding this position may be considered a "mandated reporter" under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. This position may be a "designated position" in the California State University's Conflict of Interest Code. The successful candidate accepting this position may be required to file Conflict of Interest forms subject to the regulations of the Fair Political Practices Commission. Department Housing, Dining & Conference Services (HDCS)-Facilities Maintenance Appointment Type Temporary: Position will begin May 1, 2024 and end on or before August 29, 2024. Permanent Status cannot be earned in this position. Time Base This is a hourly, intermittent, position with an anticipated 40 hour work week. Work Schedule Monday - Friday 7:00 AM-3:30 PM Anticipated Hiring Range $33.39 per hour Salary is commensurate with experience. Position Summary Under the direct supervision of the Facilities Project Supervisor, it is the primary responsibility of the Facilities Maintenance Mechanic to perform a variety of skilled preventive and general maintenance, repair, construction, and renovation work on the properties managed by Housing, Dining & Conference Services. Temporary: Position will end on or before August 29, 2024, permanent status cannot be earned in this position. Position Information Perform independently skilled preventive and general maintenance, repair, construction, and renovation work - Respond to routine maintenance and service requests - Preventative maintenance - Perform a wide range of facilities renovation, maintenance, and repair work - Use computerized maintenance systems Other duties as assigned Minimum Qualifications Knowledge: Work requires thorough knowledge of the methods, materials, equipment and tools used in one skilled trade area; working knowledge of materials, methods, equipment and tools in related trade areas pertaining to facilities, systems, construction and renovation; thorough knowledge of generally accepted trade practices in trade specialty; working knowledge of computerized maintenance and building automation systems; working knowledge of applicable building and safety codes and regulations related to facilities, systems and renovations. Abilities: Must be able to demonstrate journey-level skill in one trade and strong skills in other applicable trades; operate construction and related equipment; use considerable judgment and discretion in performing duties; read, interpret and work from blueprints, plans, drawings, and specifications; make rough sketches; estimate cost, time and materials of maintenance, repair and renovation work; maintain records and retrieve data related to work performed using manual and/or computerized record-keeping systems; prepare standard reports; provide instruction to unskilled and semi-skilled assistants; analyze and respond to emergency situations; read and write at a level appropriate to the position; and perform arithmetic calculations as required by the position. Experience: These abilities normally would be acquired through four years of increasingly responsible experience leading to journey-level skills in a mechanical or facilities/building trade, or any equivalent combination of training and experience as a facilities and systems mechanic which demonstrates the achievement of journey-level skills equivalent to that acquired through completion of an applicable apprenticeship program. Preferred Qualifications - Achievement of journey-level skills acquired through completion of an applicable apprenticeship program. - Experience working on single-family apartment complexes. Required License/Certification - Possess a valid non-restricted California Driver's License; comply with the Defensive Driver’s Training program requirements if a vehicle is used on official business. - The person holding this position is considered a 'mandated reporter' under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 Revised July 21, 2017 as a condition of employment. Environmental/Physical/Special May be required to work on weekends, some evening, overtime, call back and/or holidays. Position requires the use of a uniform that will be provided by the department and the ability to carry a department provided mobile phone and answer calls during the work schedule. Work schedule may change depending on the needs of the organization. Pre-Employment Requirements This position requires the successful completion of a background check. Eligibility to Work Applicants must be able to provide proof of US Citizenship or authorization to work in the United States, within three business days from their date of hire. Additional Information SF STATE IS NOT A SPONSORING AGENCY FOR STAFF OR MANAGEMENT POSITIONS. (i.e. H1-B VISAS). Thank you for your interest in employment with California State University (CSU). CSU is a state entity whose business operations reside within the State of California. Because of this, CSU prohibits hiring employees to perform CSU-related work outside of California with very limited exception. While this position may be eligible for occasional telework, all work is expected to be performed in the state of California, and this position is assigned to on-campus operations. CSU strongly encourages faculty, staff, and students who are accessing campus facilities to be immunized against COVID-19 or declare a medical or religious exemption from doing so. Any candidates advanced in a currently open search process are encouraged to comply with this requirement. The systemwide policy can be found at https://calstate.policystat.com/policy/9779821/latest/ and questions may be sent to hrwww@campus.edu. The Human Resources office is open Mondays through Fridays from 8 a.m. to 5 p.m., and can be reached at (415) 338-1872. Please note that this position, position requirements, application deadline and/or any other component of this position is subject to change or cancellation at any time. *Housing, Dining & Conference Services and Human Resources will not be accepting paper applications for this position.* Advertised: Apr 09 2024 Pacific Daylight Time Applications close: Closing Date/Time:
California Polytechnic State University
1 Grand Avenue, San Luis Obispo, CA 93407, USA
Job Summary Under general supervision of the University Housing Maintenance Manager, the Facilities Maintenance Mechanic is a skilled generalist, performing at a journey-level in one trade with strong skills in other trades. The Facilities Maintenance Mechanic works within the Facilities Operations Department of FMD which is responsible for providing quality maintenance and minor repair and renovation •services that meet or exceed our customers' expectations. This position independently performs a variety of skilled preventive and general maintenance, repair, construction, and renovation work on facilities and systems, particularly in the electro-mechanical trades. With general supervision, this position also performs scheduled preventive maintenance on installed equipment including scheduled inspections, documentation of results, grease and lubrication, filter and belt replacement, fluid level checks, and repair or replacement of broken parts. Hours are Monday - Friday 3:00-11:30pm or Tuesday - Saturday 3:00 - 11:30pm. Employees would be eligible for shift differential. Department Summary Facilities Management and Development (FMD), a unit within the Administration and Finance Division (AFD), is responsible for the planning, design, construction, operations, maintenance, and repair of university facilities, grounds, and infrastructure. FMD consists of five critical and interdependent support departments, including Customer & Business Services; Energy, Utilities, & Sustainability; Environmental Health & Safety; Facilities Planning & Capital Projects; and Facilities Operations. In support of the Cal Poly mission, the FMD department is committed to sustainability, responsible stewardship of natural resources, and promoting an inclusive culture that values individual and organizational integrity, civility, equity, and diversity. Key Qualifications Demonstrated journey-level skills in one trade area and strong skills in other applicable trades. Thorough knowledge of the methods, materials, equipment and tools used in one skilled trade area as well as the generally accepted trade practices associated with that trade. Working knowledge of methods, materials, equipment and tools in related trade areas pertaining to facilities, systems, construction and renovation. Working knowledge of computerized maintenance and building automation systems. Working knowledge of applicable building and safety codes and regulations related to facilities, systems and renovations. Education and Experience Four years of increasingly responsible experience leading to journey-level skills in a mechanical or facilities/building trade OR any equivalent combination of training and experience as a facilities and systems mechanic which demonstrates the achievement of journey-level skills equivalent to that acquired through completion of an applicable apprenticeship program. Salary and Benefits Anticipated Hiring Range: $69,444 - $82,320 per year Classification Range: $69,444 - $88,752 per year Cal Poly offers a best-in-class benefits program, including health, dental and vision insurance, retirement participation in the Public Employees' Retirement System, and educational benefits for eligible employees. See our benefits website for additional information. Cal Poly Cal Poly is a nationally-ranked public university located in San Luis Obispo, California, and known for its Learn by Doing philosophy. Each year more than 20,000 top-tier students come to San Luis Obispo to put knowledge into action, taking their learning outside the classroom as they prepare for careers in engineering, agriculture, science, business, humanities and the built environment. Cal Poly’s hands-on philosophy, small class sizes and close student-faculty mentorships result in graduates ready from day one to impact their communities, California and the world. For more information, visit calpoly.edu . Diversity Statement At Cal Poly, we believe that cultivating an environment that embraces and promotes diversity is fundamental to the success of our students, our employees and our community. Bringing people together from different backgrounds, experiences and value systems fosters the innovative and creative thinking that exemplifies Cal Poly's values of free inquiry, cultural and intellectual diversity, mutual respect, civic engagement, and social and environmental responsibility. Cal Poly's commitment to diversity informs our efforts in recruitment, hiring and retention. Cal Poly is an equal opportunity employer. Supplemental Information Following a conditional offer of employment, a background check (including a criminal records check) must be completed satisfactorily before any candidate may start work with Cal Poly. Failure to satisfactorily complete the background check may result in the withdrawal of the offer of employment. Current employees who are offered positions on campus will be required to undergo a background check for any position where a background check is required by law or that Cal Poly has designated as sensitive. The person holding this position is considered a 'mandated reporter' under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. Cal Poly, San Luis Obispo is not a sponsoring agency for staff positions (i.e. H-1B visas). Positions are posted for a minimum of 14 calendar days. Advertised: Feb 22 2024 Pacific Standard Time Applications close: Closing Date/Time:
Mar 07, 2024
Job Summary Under general supervision of the University Housing Maintenance Manager, the Facilities Maintenance Mechanic is a skilled generalist, performing at a journey-level in one trade with strong skills in other trades. The Facilities Maintenance Mechanic works within the Facilities Operations Department of FMD which is responsible for providing quality maintenance and minor repair and renovation •services that meet or exceed our customers' expectations. This position independently performs a variety of skilled preventive and general maintenance, repair, construction, and renovation work on facilities and systems, particularly in the electro-mechanical trades. With general supervision, this position also performs scheduled preventive maintenance on installed equipment including scheduled inspections, documentation of results, grease and lubrication, filter and belt replacement, fluid level checks, and repair or replacement of broken parts. Hours are Monday - Friday 3:00-11:30pm or Tuesday - Saturday 3:00 - 11:30pm. Employees would be eligible for shift differential. Department Summary Facilities Management and Development (FMD), a unit within the Administration and Finance Division (AFD), is responsible for the planning, design, construction, operations, maintenance, and repair of university facilities, grounds, and infrastructure. FMD consists of five critical and interdependent support departments, including Customer & Business Services; Energy, Utilities, & Sustainability; Environmental Health & Safety; Facilities Planning & Capital Projects; and Facilities Operations. In support of the Cal Poly mission, the FMD department is committed to sustainability, responsible stewardship of natural resources, and promoting an inclusive culture that values individual and organizational integrity, civility, equity, and diversity. Key Qualifications Demonstrated journey-level skills in one trade area and strong skills in other applicable trades. Thorough knowledge of the methods, materials, equipment and tools used in one skilled trade area as well as the generally accepted trade practices associated with that trade. Working knowledge of methods, materials, equipment and tools in related trade areas pertaining to facilities, systems, construction and renovation. Working knowledge of computerized maintenance and building automation systems. Working knowledge of applicable building and safety codes and regulations related to facilities, systems and renovations. Education and Experience Four years of increasingly responsible experience leading to journey-level skills in a mechanical or facilities/building trade OR any equivalent combination of training and experience as a facilities and systems mechanic which demonstrates the achievement of journey-level skills equivalent to that acquired through completion of an applicable apprenticeship program. Salary and Benefits Anticipated Hiring Range: $69,444 - $82,320 per year Classification Range: $69,444 - $88,752 per year Cal Poly offers a best-in-class benefits program, including health, dental and vision insurance, retirement participation in the Public Employees' Retirement System, and educational benefits for eligible employees. See our benefits website for additional information. Cal Poly Cal Poly is a nationally-ranked public university located in San Luis Obispo, California, and known for its Learn by Doing philosophy. Each year more than 20,000 top-tier students come to San Luis Obispo to put knowledge into action, taking their learning outside the classroom as they prepare for careers in engineering, agriculture, science, business, humanities and the built environment. Cal Poly’s hands-on philosophy, small class sizes and close student-faculty mentorships result in graduates ready from day one to impact their communities, California and the world. For more information, visit calpoly.edu . Diversity Statement At Cal Poly, we believe that cultivating an environment that embraces and promotes diversity is fundamental to the success of our students, our employees and our community. Bringing people together from different backgrounds, experiences and value systems fosters the innovative and creative thinking that exemplifies Cal Poly's values of free inquiry, cultural and intellectual diversity, mutual respect, civic engagement, and social and environmental responsibility. Cal Poly's commitment to diversity informs our efforts in recruitment, hiring and retention. Cal Poly is an equal opportunity employer. Supplemental Information Following a conditional offer of employment, a background check (including a criminal records check) must be completed satisfactorily before any candidate may start work with Cal Poly. Failure to satisfactorily complete the background check may result in the withdrawal of the offer of employment. Current employees who are offered positions on campus will be required to undergo a background check for any position where a background check is required by law or that Cal Poly has designated as sensitive. The person holding this position is considered a 'mandated reporter' under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. Cal Poly, San Luis Obispo is not a sponsoring agency for staff positions (i.e. H-1B visas). Positions are posted for a minimum of 14 calendar days. Advertised: Feb 22 2024 Pacific Standard Time Applications close: Closing Date/Time:
SAN ANTONIO WATER SYSTEM
San Antonio, Texas, United States
S tarting Hourly Rate: $19.5250. Rate of pay depends on qualifications. Job Description JO B SUMMARY The Maintenance Mechanic - Production is responsible for the basic maintenance and repair of equipment and facilities. This position will support multiple facilities with varying processes, equipment and functional requirements. E SS E N T IA L FUNCTIONS Diagnose and resolves standard water or wastewater facility machinery, piping and equipment problems. Performs predictive, preventative and corrective maintenance duties. Tracks and records information required in work order documents and enters into computerized maintenance management system (CMMS), and uses Microsoft Office. Performs standard level diagnostic tests to resolve routine problems. Repairs plant machinery and equipment, using hoists, jacks, ladders, confined space equipment, PPE, welding equipment, hand tools, squares, rules, micrometers, and other tools. Dismantles, constructs and assembles various components of facilities, industrial machinery or equipment. Performs confined space entries in hazardous environments. Monitors mechanical equipment and makes functional adjustments. Cleans and lubricates machinery and equipment according to specifications. Identifies parts with specifications and orders replacements. Furnishes mechanical recommendation when ordering new parts, machinery and equipment. Has knowledge of basic electrical and instrumentation principles. Promotes and practices a safe working environment in an industrial setting. Applies basic principles of mechanical maintenance. Performs work in accordance with TCEQ, OSHA, and other applicable government regulations. Reads O & M manuals, as-built drawings, block maps, schematics, and construction plans. Establishes and maintains effective working relationship and public relations. May operate a forklift, powered vertical lifting machinery, utility truck, crane, combination unit, water tanker, or other heavy equipment. Performs other duties as assigned. D E C I SI O N MAKING Receives general supervision. May refer more complex issues to higher levels. May act as a team leader. M IN I MU M REQUIREMENTS Graduation from high school or a General Education Development (GED) Certificate. Two years' experience performing repairs and maintenance in the mechanical trade. Training on Confined space, HAZMAT Awareness, Lock Out Tag Out, Supervising for Safety, Fit Testing, Electrical Safety, and other certifications as required. Ability to report to work on time, maintain a good attendance record, and work all designated work schedules. Valid Class "CDL-A" Texas Driver's License with Tanker and Hazardous Material endorsements, or obtain within 90 days. TCEQ Class "D" Water Operator License within 6 months AND TCEQ Class "C" Texas Groundwater Treatment Operator License within3 years. Subject to climb 200 feet in height. P R E F E R R E D QUALIFICATIONS TCEQ Class "C" Groundwater Treatment Operator License. JOB DIMENSIONS Skill in applying basic math and measurement principles. Skill in utilizing a personal computer and associated software programs. Skill in proficient use of materials, tools, and equipment commonly used in mechanical maintenance or repair of industrial facilities. Ability to enter and maintain information in the computerized maintenance management system. Ability to establish and maintain effective working relationships with internal and external customers, contractors and vendors. Ability to communicate effectively, verbally and in writing. P H Y S IC A L DEMANDS AND WORKING CONDITIONS Physical requirements include lifting up to 90 pounds occasionally. Subject to standing, sitting, walking, climbing, bending, crawling, squatting, kneeling and working in cramped and strained positions for extended periods of time to perform job scope. Subject to climbing up to 200 feet in height. Working conditions are primarily outside with frequent exposure to inclement weather; water production and recycled activities; mechanical, electrical, chemical and confined space hazards; offensive fumes; excessive noise; deep excavations; and animals, snakes and poisonous insects. Required to comply with requirements as specified in applicable regulations for personal protective equipment, including clearance for use of respiratory protection and other associated equipment. Performs confined space entries in hazardous environments. If part of the emergency action team, must be able to complete the requirements as specified in applicable regulations for Hazardous Materials Emergency Response, including clearance for use of respiratory protection and other associated protective equipment. Ability to participate in emergency action team during chemical release incidents and/or drills. Operates company vehicle on a daily basis. May be required to work hours other than regular daytime schedules such as shift work, nights, weekends and holidays. San Antonio Water System values the contributions of all its employees, providing them the best in compensation and benefits. The benefits package is designed to attract and retain a workforce of qualified employees who share a responsibility in providing quality water to 1 million consumers. From an affordable medical and dental plan to life-sustaining retirement and insurance plans, we offer benefits that reward employees for their commitment to a challenging career at SAWS. Employee benefits include the following: Competitive, market-based salaries Performance-based incentives Medical benefits Dental benefits Life insurance Prescription drug program Vision care plan Two retirement plans Deferred compensation plans (457 plan) Disability income Paid leave (vacation, sick, personal) Education assistance program Employee assistance program Flexible, tax-deferred health and dependent care spending accounts Wellness programs On-Site Fitness Facilities Community service opportunities
Mar 08, 2024
Full Time
S tarting Hourly Rate: $19.5250. Rate of pay depends on qualifications. Job Description JO B SUMMARY The Maintenance Mechanic - Production is responsible for the basic maintenance and repair of equipment and facilities. This position will support multiple facilities with varying processes, equipment and functional requirements. E SS E N T IA L FUNCTIONS Diagnose and resolves standard water or wastewater facility machinery, piping and equipment problems. Performs predictive, preventative and corrective maintenance duties. Tracks and records information required in work order documents and enters into computerized maintenance management system (CMMS), and uses Microsoft Office. Performs standard level diagnostic tests to resolve routine problems. Repairs plant machinery and equipment, using hoists, jacks, ladders, confined space equipment, PPE, welding equipment, hand tools, squares, rules, micrometers, and other tools. Dismantles, constructs and assembles various components of facilities, industrial machinery or equipment. Performs confined space entries in hazardous environments. Monitors mechanical equipment and makes functional adjustments. Cleans and lubricates machinery and equipment according to specifications. Identifies parts with specifications and orders replacements. Furnishes mechanical recommendation when ordering new parts, machinery and equipment. Has knowledge of basic electrical and instrumentation principles. Promotes and practices a safe working environment in an industrial setting. Applies basic principles of mechanical maintenance. Performs work in accordance with TCEQ, OSHA, and other applicable government regulations. Reads O & M manuals, as-built drawings, block maps, schematics, and construction plans. Establishes and maintains effective working relationship and public relations. May operate a forklift, powered vertical lifting machinery, utility truck, crane, combination unit, water tanker, or other heavy equipment. Performs other duties as assigned. D E C I SI O N MAKING Receives general supervision. May refer more complex issues to higher levels. May act as a team leader. M IN I MU M REQUIREMENTS Graduation from high school or a General Education Development (GED) Certificate. Two years' experience performing repairs and maintenance in the mechanical trade. Training on Confined space, HAZMAT Awareness, Lock Out Tag Out, Supervising for Safety, Fit Testing, Electrical Safety, and other certifications as required. Ability to report to work on time, maintain a good attendance record, and work all designated work schedules. Valid Class "CDL-A" Texas Driver's License with Tanker and Hazardous Material endorsements, or obtain within 90 days. TCEQ Class "D" Water Operator License within 6 months AND TCEQ Class "C" Texas Groundwater Treatment Operator License within3 years. Subject to climb 200 feet in height. P R E F E R R E D QUALIFICATIONS TCEQ Class "C" Groundwater Treatment Operator License. JOB DIMENSIONS Skill in applying basic math and measurement principles. Skill in utilizing a personal computer and associated software programs. Skill in proficient use of materials, tools, and equipment commonly used in mechanical maintenance or repair of industrial facilities. Ability to enter and maintain information in the computerized maintenance management system. Ability to establish and maintain effective working relationships with internal and external customers, contractors and vendors. Ability to communicate effectively, verbally and in writing. P H Y S IC A L DEMANDS AND WORKING CONDITIONS Physical requirements include lifting up to 90 pounds occasionally. Subject to standing, sitting, walking, climbing, bending, crawling, squatting, kneeling and working in cramped and strained positions for extended periods of time to perform job scope. Subject to climbing up to 200 feet in height. Working conditions are primarily outside with frequent exposure to inclement weather; water production and recycled activities; mechanical, electrical, chemical and confined space hazards; offensive fumes; excessive noise; deep excavations; and animals, snakes and poisonous insects. Required to comply with requirements as specified in applicable regulations for personal protective equipment, including clearance for use of respiratory protection and other associated equipment. Performs confined space entries in hazardous environments. If part of the emergency action team, must be able to complete the requirements as specified in applicable regulations for Hazardous Materials Emergency Response, including clearance for use of respiratory protection and other associated protective equipment. Ability to participate in emergency action team during chemical release incidents and/or drills. Operates company vehicle on a daily basis. May be required to work hours other than regular daytime schedules such as shift work, nights, weekends and holidays. San Antonio Water System values the contributions of all its employees, providing them the best in compensation and benefits. The benefits package is designed to attract and retain a workforce of qualified employees who share a responsibility in providing quality water to 1 million consumers. From an affordable medical and dental plan to life-sustaining retirement and insurance plans, we offer benefits that reward employees for their commitment to a challenging career at SAWS. Employee benefits include the following: Competitive, market-based salaries Performance-based incentives Medical benefits Dental benefits Life insurance Prescription drug program Vision care plan Two retirement plans Deferred compensation plans (457 plan) Disability income Paid leave (vacation, sick, personal) Education assistance program Employee assistance program Flexible, tax-deferred health and dependent care spending accounts Wellness programs On-Site Fitness Facilities Community service opportunities
SAN ANTONIO WATER SYSTEM
San Antonio, Texas, United States
Grade 15 - Starting hourly rate: $19.80. Rate of pay depends on qualifications. Job Description JO B SUMMARY The Maintenance Mechanic - Treatment is responsible for the basic maintenance and repair of equipment and facilities. This position will support multiple facilities with varying processes, equipment and functional requirements. E SS E N T IA L FUNCTIONS Diagnoses and resolves standard water or wastewater facility machinery, piping and equipment problems. Performs predictive, preventative and corrective maintenance duties. Tracks and records information required in work order documents and enters into computerized maintenance management system (CMMS), and uses Microsoft Office. Performs standard level diagnostic tests to resolve routine problems. Repairs plant machinery and equipment, using hoists, jacks, ladders, confined space equipment, PPE, welding equipment, hand tools, squares, rules, micrometers, and other tools. Dismantles, constructs and assembles various components of facilities, industrial machinery or equipment. Performs confined space entries in hazardous environments. Monitors mechanical equipment and makes functional adjustments. Cleans and lubricates machinery and equipment according to specifications. Identifies parts with specifications and orders replacements. Furnishes mechanical recommendation when ordering new parts, machinery and equipment. Has knowledge of basic electrical and instrumentation principles. Promotes and practices a safe working environment in an industrial setting. Applies basic principles of mechanical maintenance. Performs work in accordance with TCEQ, OSHA, and other applicable government regulations. Reads O & M manuals, as-built drawings, block maps, schematics, and construction plans. Establishes and maintains effective working relationship and public relations. May operate a forklift, powered vertical lifting machinery, utility truck, crane, combination unit, water tanker, or other heavy equipment. Performs other duties as assigned. D E C I SI O N MAKING Receives general supervision. May refer more complex issues to higher levels. May act as a team leader. M IN I MU M REQUIREMENTS Graduation from high school or a General Education Development (GED) Certificate. Two years’ experience performing repairs and maintenance in the mechanical trade. Training on Confined space, HAZMAT Awareness, Lock Out Tag Out, Supervising for Safety, Fit Testing, Electrical Safety, and other certifications as required. Ability to report to work on time, maintain a good attendance record, and work all designated work schedules. Valid Class "C" Texas Driver's License. P R E F E R R E D QUALIFICATIONS Class "C" Texas Wastewater Operator License. JOB DIMENSIONS Skill in applying basic math and measurement principles. Skill in utilizing a personal computer and associated software programs. Skill in proficient use of materials, tools, and equipment commonly used in mechanical maintenance or repair of industrial facilities. Ability to enter and maintain information in the computerized maintenance management system. Ability to establish and maintain effective working relationships with internal and external customers, contractors and vendors. Ability to communicate effectively, verbally and in writing. P H Y S IC A L DEMANDS AND WORKING CONDITIONS Physical requirements include lifting up to 90 pounds occasionally. Subject to standing, sitting, walking, climbing, bending, crawling, squatting, kneeling and working in cramped and strained positions for extended periods of time to perform job scope. Subject to climbing up to 200 feet in height. Working conditions are primarily outside with frequent exposure to inclement weather; wastewater; mechanical, electrical, chemical and confined space hazards; offensive fumes; excessive noise; heavy traffic; deep excavations; and animals, snakes and poisonous insects. May be required to comply with requirements as specified in applicable regulations for personal protective equipment, including clearance for use of respiratory protection and other associated protective equipment, including clearance for use of respiratory protection and other associated protective equipment. Operates company vehicle on a daily basis. May be required to work hours other than regular daytime schedules such as shift work, nights, weekends and holidays. San Antonio Water System values the contributions of all its employees, providing them the best in compensation and benefits. The benefits package is designed to attract and retain a workforce of qualified employees who share a responsibility in providing quality water to 1 million consumers. From an affordable medical and dental plan to life-sustaining retirement and insurance plans, we offer benefits that reward employees for their commitment to a challenging career at SAWS. Employee benefits include the following: Competitive, market-based salaries Performance-based incentives Medical benefits Dental benefits Life insurance Prescription drug program Vision care plan Two retirement plans Deferred compensation plans (457 plan) Disability income Paid leave (vacation, sick, personal) Education assistance program Employee assistance program Flexible, tax-deferred health and dependent care spending accounts Wellness programs On-Site Fitness Facilities Community service opportunities Closing Date/Time: 5/5/2024 11:59 PM Central
Apr 19, 2024
Full Time
Grade 15 - Starting hourly rate: $19.80. Rate of pay depends on qualifications. Job Description JO B SUMMARY The Maintenance Mechanic - Treatment is responsible for the basic maintenance and repair of equipment and facilities. This position will support multiple facilities with varying processes, equipment and functional requirements. E SS E N T IA L FUNCTIONS Diagnoses and resolves standard water or wastewater facility machinery, piping and equipment problems. Performs predictive, preventative and corrective maintenance duties. Tracks and records information required in work order documents and enters into computerized maintenance management system (CMMS), and uses Microsoft Office. Performs standard level diagnostic tests to resolve routine problems. Repairs plant machinery and equipment, using hoists, jacks, ladders, confined space equipment, PPE, welding equipment, hand tools, squares, rules, micrometers, and other tools. Dismantles, constructs and assembles various components of facilities, industrial machinery or equipment. Performs confined space entries in hazardous environments. Monitors mechanical equipment and makes functional adjustments. Cleans and lubricates machinery and equipment according to specifications. Identifies parts with specifications and orders replacements. Furnishes mechanical recommendation when ordering new parts, machinery and equipment. Has knowledge of basic electrical and instrumentation principles. Promotes and practices a safe working environment in an industrial setting. Applies basic principles of mechanical maintenance. Performs work in accordance with TCEQ, OSHA, and other applicable government regulations. Reads O & M manuals, as-built drawings, block maps, schematics, and construction plans. Establishes and maintains effective working relationship and public relations. May operate a forklift, powered vertical lifting machinery, utility truck, crane, combination unit, water tanker, or other heavy equipment. Performs other duties as assigned. D E C I SI O N MAKING Receives general supervision. May refer more complex issues to higher levels. May act as a team leader. M IN I MU M REQUIREMENTS Graduation from high school or a General Education Development (GED) Certificate. Two years’ experience performing repairs and maintenance in the mechanical trade. Training on Confined space, HAZMAT Awareness, Lock Out Tag Out, Supervising for Safety, Fit Testing, Electrical Safety, and other certifications as required. Ability to report to work on time, maintain a good attendance record, and work all designated work schedules. Valid Class "C" Texas Driver's License. P R E F E R R E D QUALIFICATIONS Class "C" Texas Wastewater Operator License. JOB DIMENSIONS Skill in applying basic math and measurement principles. Skill in utilizing a personal computer and associated software programs. Skill in proficient use of materials, tools, and equipment commonly used in mechanical maintenance or repair of industrial facilities. Ability to enter and maintain information in the computerized maintenance management system. Ability to establish and maintain effective working relationships with internal and external customers, contractors and vendors. Ability to communicate effectively, verbally and in writing. P H Y S IC A L DEMANDS AND WORKING CONDITIONS Physical requirements include lifting up to 90 pounds occasionally. Subject to standing, sitting, walking, climbing, bending, crawling, squatting, kneeling and working in cramped and strained positions for extended periods of time to perform job scope. Subject to climbing up to 200 feet in height. Working conditions are primarily outside with frequent exposure to inclement weather; wastewater; mechanical, electrical, chemical and confined space hazards; offensive fumes; excessive noise; heavy traffic; deep excavations; and animals, snakes and poisonous insects. May be required to comply with requirements as specified in applicable regulations for personal protective equipment, including clearance for use of respiratory protection and other associated protective equipment, including clearance for use of respiratory protection and other associated protective equipment. Operates company vehicle on a daily basis. May be required to work hours other than regular daytime schedules such as shift work, nights, weekends and holidays. San Antonio Water System values the contributions of all its employees, providing them the best in compensation and benefits. The benefits package is designed to attract and retain a workforce of qualified employees who share a responsibility in providing quality water to 1 million consumers. From an affordable medical and dental plan to life-sustaining retirement and insurance plans, we offer benefits that reward employees for their commitment to a challenging career at SAWS. Employee benefits include the following: Competitive, market-based salaries Performance-based incentives Medical benefits Dental benefits Life insurance Prescription drug program Vision care plan Two retirement plans Deferred compensation plans (457 plan) Disability income Paid leave (vacation, sick, personal) Education assistance program Employee assistance program Flexible, tax-deferred health and dependent care spending accounts Wellness programs On-Site Fitness Facilities Community service opportunities Closing Date/Time: 5/5/2024 11:59 PM Central
CITY OF ATLANTA, GA
Atlanta, Georgia, United States
Posting Expires: April 3, 2024 Salary: $17.97/hour Facilities Maintenance Mechanic - Plumbing The purpose of this job is to perform skilled/manual work functions associated with general maintenance of an assigned departments' facilities. Duties include, but are not limited to: directing activities, repairing and maintaining facilities and equipment; performing general construction, repair, and installation tasks; performing basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks; and maintaining the workshop area. General Description and Classification Standards Participates in more complex and difficult work Supervision Received: Works under very general supervision. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. Essential Duties and Responsibilities: Performs general construction, repair, and installation tasks such as installing/repairing doors, locks, fences, and plumbing fixtures; replacing windows; repairing gutters and roof leaks; assembling furniture or equipment; hanging pictures, blinds, guardrails, and fixtures; pulling cables; and moving furniture. Performs basic plumbing, welding, electrical, HVAC, carpentry, masonry, landscaping, and other tasks such installing/repairing plumbing systems, gas pipe lines, and fuel pumps; soldering pipes; laying tile flooring; and troubleshooting minor electrical repairs. Maintains inventory levels of tools and materials orders supplies as needed; picks up special parts from supplier as appropriate. Maintains a clean and orderly shop; picks up and disposes of refuge. Performs various tasks or errands as assigned such transporting employees, and delivering supplies or equipment. Provides training, guidance and direction to co-workers or assistants on projects. Perform supervisory duties as assigned. Provides assistance to other positions as needed. Responds to routine requests for information or assistance from members of the staff, the public or other individuals. Substitutes for co-workers in temporary absence of same. Communicates effectively with co-workers and other employees concerning work orders, problems, questions, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Answers the telephone; provides information, advice and guidance; takes and relays messages and/or directs calls to appropriate personnel; returns calls, as necessary. Planning and Organizing Plans and organizes daily work routine; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments and establishes a personal schedule accordingly. Plans and prepares for special projects on a monthly basis. Equipment use and Maintenance Operates and maintains equipment, machinery and tools related to construction and maintenance projects which includes an aerial bucket truck, backhoe, arc welder, jackhammer, drill press, hammer drill, pipe threader machine, shovel, catch basin spoon, level, water/waste pump, water key, ladder, scaffolding, etc.; utilizes various tools which includes carpentry tools, masonry tools, electrical tools, hand tools, as applicable. Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. Record Keeping and Documentation. Reviews blueprints, drawings and diagrams. Receives various forms, work orders, invoices, reports, and other documents; completes, processes, and forwards as appropriate. Prepares/generates maintenance records, work reports, or other documentation; forwards as appropriate. Marginal Job Functions Performs other related duties as required. Typical Qualifications: High school diploma or GED required Valid Georgia Driver’s License required One year (1) of experience in construction, carpentry, building trades; such as HVAC, plumbing, welding or electrical. Preferred Qualifications: A Georgia’s Class B commercial driver’s license (CDL) is preferred. DPR2024 Closing Date/Time: 2024-05-17
Apr 05, 2024
Full Time
Posting Expires: April 3, 2024 Salary: $17.97/hour Facilities Maintenance Mechanic - Plumbing The purpose of this job is to perform skilled/manual work functions associated with general maintenance of an assigned departments' facilities. Duties include, but are not limited to: directing activities, repairing and maintaining facilities and equipment; performing general construction, repair, and installation tasks; performing basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks; and maintaining the workshop area. General Description and Classification Standards Participates in more complex and difficult work Supervision Received: Works under very general supervision. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. Essential Duties and Responsibilities: Performs general construction, repair, and installation tasks such as installing/repairing doors, locks, fences, and plumbing fixtures; replacing windows; repairing gutters and roof leaks; assembling furniture or equipment; hanging pictures, blinds, guardrails, and fixtures; pulling cables; and moving furniture. Performs basic plumbing, welding, electrical, HVAC, carpentry, masonry, landscaping, and other tasks such installing/repairing plumbing systems, gas pipe lines, and fuel pumps; soldering pipes; laying tile flooring; and troubleshooting minor electrical repairs. Maintains inventory levels of tools and materials orders supplies as needed; picks up special parts from supplier as appropriate. Maintains a clean and orderly shop; picks up and disposes of refuge. Performs various tasks or errands as assigned such transporting employees, and delivering supplies or equipment. Provides training, guidance and direction to co-workers or assistants on projects. Perform supervisory duties as assigned. Provides assistance to other positions as needed. Responds to routine requests for information or assistance from members of the staff, the public or other individuals. Substitutes for co-workers in temporary absence of same. Communicates effectively with co-workers and other employees concerning work orders, problems, questions, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Answers the telephone; provides information, advice and guidance; takes and relays messages and/or directs calls to appropriate personnel; returns calls, as necessary. Planning and Organizing Plans and organizes daily work routine; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments and establishes a personal schedule accordingly. Plans and prepares for special projects on a monthly basis. Equipment use and Maintenance Operates and maintains equipment, machinery and tools related to construction and maintenance projects which includes an aerial bucket truck, backhoe, arc welder, jackhammer, drill press, hammer drill, pipe threader machine, shovel, catch basin spoon, level, water/waste pump, water key, ladder, scaffolding, etc.; utilizes various tools which includes carpentry tools, masonry tools, electrical tools, hand tools, as applicable. Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. Record Keeping and Documentation. Reviews blueprints, drawings and diagrams. Receives various forms, work orders, invoices, reports, and other documents; completes, processes, and forwards as appropriate. Prepares/generates maintenance records, work reports, or other documentation; forwards as appropriate. Marginal Job Functions Performs other related duties as required. Typical Qualifications: High school diploma or GED required Valid Georgia Driver’s License required One year (1) of experience in construction, carpentry, building trades; such as HVAC, plumbing, welding or electrical. Preferred Qualifications: A Georgia’s Class B commercial driver’s license (CDL) is preferred. DPR2024 Closing Date/Time: 2024-05-17
CA DEPARTMENT OF PARKS AND RECREATION
Sacramento, California, United States
Job Description and Duties MAINTENANCE MECHANIC - SANTA CRUZ DISTRICT / PAJARO COAST SECTOR / NEW BRIGHTON STATE BEACH This position is subject to the Post and Bid process. Applications from a certification list, transfer change in class, reinstatement, re-employment, and training and development assignment candidates will be accepted for this position but consistent with the MOU/Bargaining Agreement BU12/13 contract cannot be acted upon unless the Post & Bid process does not result in a hire. The reporting location for this position is New Brighton State Beach. This position will work under the direction of the Park Maintenance Chief I. This position will be responsible for, but not limited to projects pertaining to Water and Waste Water operation. This position must be highly skilled in electrical, have an understanding of pumps, and be able to develop and maintain a preventative maintenance program for all equipment in the water and wastewater systems. Work schedule will be Tuesday-Saturday hours 7:00 a.m. - 3:30 p.m. This position requires a valid Class C driver’s license. You must answer the questions addressing your driver’s license on your application. Ensure you provide your driver’s license number, class, expiration date, and any endorsements and/or restrictions on your application. The selected candidate is required to submit to a background investigation process utilizing Live Scan finger printing prior to appointment. This position is designated as not telework eligible. Training and Development Assignments may be considered. State housing may be required. For further information regarding this position, please contact Augustine Ceballos at (831) 212-7283 or e-mail at Augustine.ceballos@parks.ca.gov This recruitment may be used to fill identical vacancies which may occur within 180 days of the Final Filing Date of this job posting. You will find additional information about the job in the Duty Statement . Minimum Requirements You will find the Minimum Requirements in the Class Specification. MAINTENANCE MECHANIC Additional Documents Job Application Package Checklist Duty Statement Position Details Job Code #: JC-417038 Position #(s): 549-717-6940-001 Working Title: MAINTENANCE MECHANIC Classification: MAINTENANCE MECHANIC $5,264.00 - $6,067.00 A # of Positions: Multiple Work Location: Santa Cruz County Telework: In Office Job Type: Permanent, Full Time Work Shift: 7:00 a.m. to 3:30 p.m. Work Week: Tuesday through Saturday Department Information The mission of California State Parks is to provide for the health, inspiration, and education of the people of California by helping to preserve the state's extraordinary biological diversity, protecting its most valued natural and cultural resources, and creating opportunities for high-quality outdoor recreation. All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences, and is free from discrimination. Department Website: http://www.parks.ca.gov Special Requirements The position(s) require(s) a valid California Drivers License (CDL). You must answer the questions addressing your CDL on your application. Ensure you provide your CDL number, class, expiration date, and any endorsements and/or restrictions. The position(s) require(s) a Background Investigation be cleared prior to being hired. The position(s) require(s) Medical Clearance prior to being hired. DO NOT include any confidential information to your application or supporting documents (i.e., Social Security Number, birthdate, marital status, medical information, examination results, method of eligibility, etc.) SROA/SURPLUS Applicants: You must check the SROA/Surplus as your claimed method of eligibility and attach your SROA/Surplus letter as an additional document. Per California Code of Regulations (CCR) 599.961 , this is a sensitive position, and therefore subject to drug and alcohol testing. It should be noted that testing is not mandatory, but is allowed to be conducted only if and when there is a determination of reasonable suspicion as defined in CCR 599.962 . Application Instructions Completed applications and all required documents must be received or postmarked by the Final Filing Date in order to be considered. Dates printed on Mobile Bar Codes, such as the Quick Response (QR) Codes available at the USPS, are not considered Postmark dates for the purpose of determining timely filing of an application. Final Filing Date: 4/19/2024 Who May Apply Individuals who are currently in the classification, eligible for lateral transfer, eligible for reinstatement, have list eligibility, are in the process of obtaining list eligibility, or have SROA and/or Surplus eligibility (please attach your letter, if available). SROA and Surplus candidates are given priority; therefore, individuals with other eligibility may be considered in the event no SROA or Surplus candidates apply. Individuals who are eligible for a Training and Development assignment may also be considered for this position(s). Applications will be screened and only the most qualified applicants will be selected to move forward in the selection process. Applicants must meet the Minimum Qualifications stated in the Classification Specification(s). How To Apply Complete Application Packages (including your Examination/Employment Application (STD 678) and applicable or required documents) must be submitted to apply for this Job Posting. Application Packages may be submitted electronically through your CalCareer Account at www.CalCareers.ca.gov. When submitting your application in hard copy, a completed copy of the Application Package listing must be included. If you choose to not apply electronically, a hard copy application package may be submitted through an alternative method listed below: Address for Mailing Application Packages You may submit your application and any applicable or required documents to: Department of Parks & Recreation Attn: Classification and Hiring P.O. Box 942896 Sacramento , CA 94296-0001 Address for Drop-Off Application Packages You may drop off your application and any applicable or required documents at: Department of Parks & Recreation 715 P Street Sacramento , CA 95814 Monday through Friday, excluding holidays 08:00 AM - 05:00 PM Required Application Package Documents The following items are required to be submitted with your application. Applicants who do not submit the required items timely may not be considered for this job: Current version of the State Examination/Employment Application STD Form 678 (when not applying electronically), or the Electronic State Employment Application through your Applicant Account at www.CalCareers.ca.gov. All Experience and Education relating to the Minimum Qualifications listed on the Classification Specification should be included to demonstrate how you meet the Minimum Qualifications for the position. Resume is optional. It may be included, but is not required. Applicants requiring reasonable accommodations for the hiring interview process must request the necessary accommodations if scheduled for a hiring interview. The request should be made at the time of contact to schedule the interview. Questions regarding reasonable accommodations may be directed to the EEO contact listed on this job posting. Benefits Benefit information can be found on the CalHR website and the CalPERS website. Contact Information The Hiring Unit Contact is available to answer questions regarding the position or application process. Department Website: http://www.parks.ca.gov Hiring Unit Contact: Augustine Ceballos (831) 212-7283 augustine.ballos@parks.ca.gov Please direct requests for Reasonable Accommodations to the interview scheduler at the time the interview is being scheduled. You may direct any additional questions regarding Reasonable Accommodations or Equal Employment Opportunity for this position(s) to the Department's EEO Office. EEO Contact: Sharon Comas - Human Rights Office (916) 653-8148 sharon.comas@parks.ca.gov California Relay Service: 1-800-735-2929 (TTY), 1-800-735-2922 (Voice) TTY is a Telecommunications Device for the Deaf, and is reachable only from phones equipped with a TTY Device. Additional Instructions If submitting your completed Application Package by mail or hand delivery, you must include the Position # 549-717-6940-001 and the Job Control # JC-417038 in the “Examination or Job Title for which you are applying” section on the STD. 678. Note: If you are applying for multiple positions, you must complete a STD. 678 for each position separately. Incomplete applications or applications received with multiple positions listed on one application will not be considered. Employment History on the STD 678 must be complete and include dates, accurate hours per week, total time worked, duties and responsibilities, and contact names and phone numbers of supervisors. Failure to submit a completed STD 678 may result in you being screened out. Only the most qualified candidates will be invited to an interview. Eligibility Information To be considered for the job vacancy you MUST satisfy one of the following requirements: List Eligibility - Successfully complete the civil service exam for classification Maintenance Mechanic. Click here for more information on how to apply for the Maintenance Mechanic. NOTE: Please refer to the exam bulletin for the frequency of administration of this exam. Transfer Eligibility - Must have current employment with the State of California in the same classification or in a classification that is comparable. If in a different classification, you must meet the minimum qualifications (see Minimum Qualifications section and associated links above). Reinstatement Eligibility - Previously obtained permanent employment with the State of California in the same classification or in a classification that is comparable. If in a different classification, you must meet the minimum qualifications (see Minimum Qualifications section and associated links above). In some special circumstances, candidates who meet the Minimum Qualifications for the position, but who do not have one of the types of eligibility listed above, may be hired. However, this is rare, and the preferred method of appointment is through eligibility as described above. Equal Opportunity Employer The State of California is an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation. It is an objective of the State of California to achieve a drug-free work place. Any applicant for state employment will be expected to behave in accordance with this objective because the use of illegal drugs is inconsistent with the law of the State, the rules governing Civil Service, and the special trust placed in public servants. Closing Date/Time: 4/19/2024
Apr 06, 2024
Full Time
Job Description and Duties MAINTENANCE MECHANIC - SANTA CRUZ DISTRICT / PAJARO COAST SECTOR / NEW BRIGHTON STATE BEACH This position is subject to the Post and Bid process. Applications from a certification list, transfer change in class, reinstatement, re-employment, and training and development assignment candidates will be accepted for this position but consistent with the MOU/Bargaining Agreement BU12/13 contract cannot be acted upon unless the Post & Bid process does not result in a hire. The reporting location for this position is New Brighton State Beach. This position will work under the direction of the Park Maintenance Chief I. This position will be responsible for, but not limited to projects pertaining to Water and Waste Water operation. This position must be highly skilled in electrical, have an understanding of pumps, and be able to develop and maintain a preventative maintenance program for all equipment in the water and wastewater systems. Work schedule will be Tuesday-Saturday hours 7:00 a.m. - 3:30 p.m. This position requires a valid Class C driver’s license. You must answer the questions addressing your driver’s license on your application. Ensure you provide your driver’s license number, class, expiration date, and any endorsements and/or restrictions on your application. The selected candidate is required to submit to a background investigation process utilizing Live Scan finger printing prior to appointment. This position is designated as not telework eligible. Training and Development Assignments may be considered. State housing may be required. For further information regarding this position, please contact Augustine Ceballos at (831) 212-7283 or e-mail at Augustine.ceballos@parks.ca.gov This recruitment may be used to fill identical vacancies which may occur within 180 days of the Final Filing Date of this job posting. You will find additional information about the job in the Duty Statement . Minimum Requirements You will find the Minimum Requirements in the Class Specification. MAINTENANCE MECHANIC Additional Documents Job Application Package Checklist Duty Statement Position Details Job Code #: JC-417038 Position #(s): 549-717-6940-001 Working Title: MAINTENANCE MECHANIC Classification: MAINTENANCE MECHANIC $5,264.00 - $6,067.00 A # of Positions: Multiple Work Location: Santa Cruz County Telework: In Office Job Type: Permanent, Full Time Work Shift: 7:00 a.m. to 3:30 p.m. Work Week: Tuesday through Saturday Department Information The mission of California State Parks is to provide for the health, inspiration, and education of the people of California by helping to preserve the state's extraordinary biological diversity, protecting its most valued natural and cultural resources, and creating opportunities for high-quality outdoor recreation. All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences, and is free from discrimination. Department Website: http://www.parks.ca.gov Special Requirements The position(s) require(s) a valid California Drivers License (CDL). You must answer the questions addressing your CDL on your application. Ensure you provide your CDL number, class, expiration date, and any endorsements and/or restrictions. The position(s) require(s) a Background Investigation be cleared prior to being hired. The position(s) require(s) Medical Clearance prior to being hired. DO NOT include any confidential information to your application or supporting documents (i.e., Social Security Number, birthdate, marital status, medical information, examination results, method of eligibility, etc.) SROA/SURPLUS Applicants: You must check the SROA/Surplus as your claimed method of eligibility and attach your SROA/Surplus letter as an additional document. Per California Code of Regulations (CCR) 599.961 , this is a sensitive position, and therefore subject to drug and alcohol testing. It should be noted that testing is not mandatory, but is allowed to be conducted only if and when there is a determination of reasonable suspicion as defined in CCR 599.962 . Application Instructions Completed applications and all required documents must be received or postmarked by the Final Filing Date in order to be considered. Dates printed on Mobile Bar Codes, such as the Quick Response (QR) Codes available at the USPS, are not considered Postmark dates for the purpose of determining timely filing of an application. Final Filing Date: 4/19/2024 Who May Apply Individuals who are currently in the classification, eligible for lateral transfer, eligible for reinstatement, have list eligibility, are in the process of obtaining list eligibility, or have SROA and/or Surplus eligibility (please attach your letter, if available). SROA and Surplus candidates are given priority; therefore, individuals with other eligibility may be considered in the event no SROA or Surplus candidates apply. Individuals who are eligible for a Training and Development assignment may also be considered for this position(s). Applications will be screened and only the most qualified applicants will be selected to move forward in the selection process. Applicants must meet the Minimum Qualifications stated in the Classification Specification(s). How To Apply Complete Application Packages (including your Examination/Employment Application (STD 678) and applicable or required documents) must be submitted to apply for this Job Posting. Application Packages may be submitted electronically through your CalCareer Account at www.CalCareers.ca.gov. When submitting your application in hard copy, a completed copy of the Application Package listing must be included. If you choose to not apply electronically, a hard copy application package may be submitted through an alternative method listed below: Address for Mailing Application Packages You may submit your application and any applicable or required documents to: Department of Parks & Recreation Attn: Classification and Hiring P.O. Box 942896 Sacramento , CA 94296-0001 Address for Drop-Off Application Packages You may drop off your application and any applicable or required documents at: Department of Parks & Recreation 715 P Street Sacramento , CA 95814 Monday through Friday, excluding holidays 08:00 AM - 05:00 PM Required Application Package Documents The following items are required to be submitted with your application. Applicants who do not submit the required items timely may not be considered for this job: Current version of the State Examination/Employment Application STD Form 678 (when not applying electronically), or the Electronic State Employment Application through your Applicant Account at www.CalCareers.ca.gov. All Experience and Education relating to the Minimum Qualifications listed on the Classification Specification should be included to demonstrate how you meet the Minimum Qualifications for the position. Resume is optional. It may be included, but is not required. Applicants requiring reasonable accommodations for the hiring interview process must request the necessary accommodations if scheduled for a hiring interview. The request should be made at the time of contact to schedule the interview. Questions regarding reasonable accommodations may be directed to the EEO contact listed on this job posting. Benefits Benefit information can be found on the CalHR website and the CalPERS website. Contact Information The Hiring Unit Contact is available to answer questions regarding the position or application process. Department Website: http://www.parks.ca.gov Hiring Unit Contact: Augustine Ceballos (831) 212-7283 augustine.ballos@parks.ca.gov Please direct requests for Reasonable Accommodations to the interview scheduler at the time the interview is being scheduled. You may direct any additional questions regarding Reasonable Accommodations or Equal Employment Opportunity for this position(s) to the Department's EEO Office. EEO Contact: Sharon Comas - Human Rights Office (916) 653-8148 sharon.comas@parks.ca.gov California Relay Service: 1-800-735-2929 (TTY), 1-800-735-2922 (Voice) TTY is a Telecommunications Device for the Deaf, and is reachable only from phones equipped with a TTY Device. Additional Instructions If submitting your completed Application Package by mail or hand delivery, you must include the Position # 549-717-6940-001 and the Job Control # JC-417038 in the “Examination or Job Title for which you are applying” section on the STD. 678. Note: If you are applying for multiple positions, you must complete a STD. 678 for each position separately. Incomplete applications or applications received with multiple positions listed on one application will not be considered. Employment History on the STD 678 must be complete and include dates, accurate hours per week, total time worked, duties and responsibilities, and contact names and phone numbers of supervisors. Failure to submit a completed STD 678 may result in you being screened out. Only the most qualified candidates will be invited to an interview. Eligibility Information To be considered for the job vacancy you MUST satisfy one of the following requirements: List Eligibility - Successfully complete the civil service exam for classification Maintenance Mechanic. Click here for more information on how to apply for the Maintenance Mechanic. NOTE: Please refer to the exam bulletin for the frequency of administration of this exam. Transfer Eligibility - Must have current employment with the State of California in the same classification or in a classification that is comparable. If in a different classification, you must meet the minimum qualifications (see Minimum Qualifications section and associated links above). Reinstatement Eligibility - Previously obtained permanent employment with the State of California in the same classification or in a classification that is comparable. If in a different classification, you must meet the minimum qualifications (see Minimum Qualifications section and associated links above). In some special circumstances, candidates who meet the Minimum Qualifications for the position, but who do not have one of the types of eligibility listed above, may be hired. However, this is rare, and the preferred method of appointment is through eligibility as described above. Equal Opportunity Employer The State of California is an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation. It is an objective of the State of California to achieve a drug-free work place. Any applicant for state employment will be expected to behave in accordance with this objective because the use of illegal drugs is inconsistent with the law of the State, the rules governing Civil Service, and the special trust placed in public servants. Closing Date/Time: 4/19/2024
CITY OF INGLEWOOD, CA
Inglewood, California, United States
Applications will be accepted online at www.Cityofinglewood.org/jobs.aspx until a sufficient number of qualified applications have been received. Resumes are accepted but not in place of the official city employment application. Proof of education requirements/certifications must be submitted as a PDF via EMAIL to human_resources@cityofinglewood.org with the SUBJECT LINE: your name and job title applying for. Incomplete applications will be automatically rejected. POSITION: Under supervision, troubleshoots, maintains, and repairs various light, medium, and heavy-duty City vehicles and equipment and assists other mechanics as needed. JOB TASKS Equipment and vehicles to service: As assigned by the Superintendent or designee, repairs automobiles, police cars, police motorcycles, sweepers, graders, rollers, trucks, and other heavy and specialized equipment. Will also repair the same units as Mechanic I, when necessary. Inspects, diagnoses, repairs, overhauls, and replaces systems and components, including but not limited to brakes, engine transmissions, air conditioning, exhaust, and electrical systems, diesel, gasoline, and alternative fueling systems (e.g., Compressed Natural Gas [CNG], propane, and bio-fuel), hybrid and electric drive systems, emissions; automotive and truck hydraulic systems; and related computer-controlled components; Conducts vehicle safety inspection and performs routine and preventive maintenance on vehicles and various equipment; Inputs data for electronic documentation and records of repairs and maintenance to include maintaining and assisting in maintaining parts inventory; Responds to road calls and performs on-site diagnostics and repairs on vehicles and equipment. Fabricates and installs a variety of parts and equipment and performs minor welding; Maintains and cleans tools and work areas and disposes of hazardous waste following City guidelines; Keeps current with new technology and participates in various training activities. Follows applicable safety rules and regulations and performs other job-related duties as assigned. Provides technical assistance and instruction to other mechanics as needed. QUALIFICATIONS Possession of Automotive Service Excellence (ASE) Certificates A-1 thru A-9, Alternate Fuels Technician (Test F1), and maintain a valid California Class B Driver License AND three years’ professional work experience as an automotive/equipment Mechanic performing light, medium, and heavy-duty vehicle repair to include working on emergency vehicles. Knowledgeable of fuel systems, emission control, gasoline, natural gas, and diesel engines, electrical systems, automotive and truck hydraulic systems, drivetrains, brake systems and air conditioning systems, lubrication, and preventive maintenance and repair procedures; Skilled in the proper and safe use of tools and equipment, including electronic diagnostic tools, handling and disposing of hazardous waste, troubleshooting and repairing vehicles in an efficient and timely manner, conducting safety inspections, and maintaining a wide range of equipment and emergency vehicles, and in establishing and maintaining cooperative working relationships with City employees and vendors; Ability to perform heavy physical labor and work in cramped, close-quarter environments, lift, carry, and move objects up to 70 lbs, complete and maintain logs and records accurately, learn and use required computer software applications, follow and provide written and oral instructions, and work independently and as a team. WORK ENVIRONMENT AND PHYSICAL REQUIREMENTS Work is performed in outdoor and service garage environments. Work may require frequent standing, walking, bending, and lifting 70 pounds. Incumbents may be exposed to repetitive motion, moving automotive parts, traffic, hazardous fumes, and chemicals. THE SELECTION PROCESS: The examination process consists of one or more of the following: (1) Training and Experience Evaluation, (2) a Written Exam, and (3) a Qualifications Appraisal Interview with a panel of subject matter experts. Candidates must receive a 70-100 to have their names on the active eligibility list for one year. The top three ranks on the Eligibility List will have their application materials forwarded to the hiring authority for a selection interview. Applicants whose experience best meets the City’s needs will be invited to participate in the examination process for this position. Candidates must have access to a computer with internet, video, and audio capabilities to participate in our examination process. The City of Inglewood is an Equal Opportunity Employer. It does not discriminate based on age, sex, race, religion, national origin, marital status, or handicap status in its employment actions, decisions, policies, and practice.
Apr 10, 2024
Applications will be accepted online at www.Cityofinglewood.org/jobs.aspx until a sufficient number of qualified applications have been received. Resumes are accepted but not in place of the official city employment application. Proof of education requirements/certifications must be submitted as a PDF via EMAIL to human_resources@cityofinglewood.org with the SUBJECT LINE: your name and job title applying for. Incomplete applications will be automatically rejected. POSITION: Under supervision, troubleshoots, maintains, and repairs various light, medium, and heavy-duty City vehicles and equipment and assists other mechanics as needed. JOB TASKS Equipment and vehicles to service: As assigned by the Superintendent or designee, repairs automobiles, police cars, police motorcycles, sweepers, graders, rollers, trucks, and other heavy and specialized equipment. Will also repair the same units as Mechanic I, when necessary. Inspects, diagnoses, repairs, overhauls, and replaces systems and components, including but not limited to brakes, engine transmissions, air conditioning, exhaust, and electrical systems, diesel, gasoline, and alternative fueling systems (e.g., Compressed Natural Gas [CNG], propane, and bio-fuel), hybrid and electric drive systems, emissions; automotive and truck hydraulic systems; and related computer-controlled components; Conducts vehicle safety inspection and performs routine and preventive maintenance on vehicles and various equipment; Inputs data for electronic documentation and records of repairs and maintenance to include maintaining and assisting in maintaining parts inventory; Responds to road calls and performs on-site diagnostics and repairs on vehicles and equipment. Fabricates and installs a variety of parts and equipment and performs minor welding; Maintains and cleans tools and work areas and disposes of hazardous waste following City guidelines; Keeps current with new technology and participates in various training activities. Follows applicable safety rules and regulations and performs other job-related duties as assigned. Provides technical assistance and instruction to other mechanics as needed. QUALIFICATIONS Possession of Automotive Service Excellence (ASE) Certificates A-1 thru A-9, Alternate Fuels Technician (Test F1), and maintain a valid California Class B Driver License AND three years’ professional work experience as an automotive/equipment Mechanic performing light, medium, and heavy-duty vehicle repair to include working on emergency vehicles. Knowledgeable of fuel systems, emission control, gasoline, natural gas, and diesel engines, electrical systems, automotive and truck hydraulic systems, drivetrains, brake systems and air conditioning systems, lubrication, and preventive maintenance and repair procedures; Skilled in the proper and safe use of tools and equipment, including electronic diagnostic tools, handling and disposing of hazardous waste, troubleshooting and repairing vehicles in an efficient and timely manner, conducting safety inspections, and maintaining a wide range of equipment and emergency vehicles, and in establishing and maintaining cooperative working relationships with City employees and vendors; Ability to perform heavy physical labor and work in cramped, close-quarter environments, lift, carry, and move objects up to 70 lbs, complete and maintain logs and records accurately, learn and use required computer software applications, follow and provide written and oral instructions, and work independently and as a team. WORK ENVIRONMENT AND PHYSICAL REQUIREMENTS Work is performed in outdoor and service garage environments. Work may require frequent standing, walking, bending, and lifting 70 pounds. Incumbents may be exposed to repetitive motion, moving automotive parts, traffic, hazardous fumes, and chemicals. THE SELECTION PROCESS: The examination process consists of one or more of the following: (1) Training and Experience Evaluation, (2) a Written Exam, and (3) a Qualifications Appraisal Interview with a panel of subject matter experts. Candidates must receive a 70-100 to have their names on the active eligibility list for one year. The top three ranks on the Eligibility List will have their application materials forwarded to the hiring authority for a selection interview. Applicants whose experience best meets the City’s needs will be invited to participate in the examination process for this position. Candidates must have access to a computer with internet, video, and audio capabilities to participate in our examination process. The City of Inglewood is an Equal Opportunity Employer. It does not discriminate based on age, sex, race, religion, national origin, marital status, or handicap status in its employment actions, decisions, policies, and practice.
CITY OF INGLEWOOD, CA
Inglewood, California, United States
Applications will be accepted online at www.Cityofinglewood.org/jobs.aspx until a sufficient number of qualified applications have been received. Resumes are accepted but not in place of the official city employment application. Proof of education requirements/certifications must be submitted as a PDF via EMAIL to human_resources@cityofinglewood.org with the SUBJECT LINE: your name and job title applying for. Incomplete applications will be automatically rejected. POSITION: Under close supervision, troubleshoots maintains and repairs light transportation, construction, mechanical, emergency equipment, and passenger vehicles, including many vehicles operating on compressed natural gas (CNG). JOB TASKS Equipment and vehicles to service: As assigned by the Superintendent or designee, light vehicles and equipment, agriculture equipment, small construction units, trailers, emergency equipment, passenger vehicles, forklifts, weed Wacker’s, edger’s, lawn mowers, ATV’s, chippers, concrete saws, power washers, tampers, chain saws, including vehicles operating on compressed natural gas (CNG), hybrids & electric vehicles, light duty trucks, vans, and SUV’s from ¼ ton to 1 ton. Inspects, diagnoses, repairs, overhauls, and replaces systems and components, including but not limited to: brakes, engines transmissions, air conditioning, exhaust, and electrical systems, diesel, gasoline, and alternative fueling systems (e.g., Compressed Natural Gas [CNG], propane, and bio-fuel), hybrid and electric drive systems, emissions; automotive and truck hydraulic systems; and related computer-controlled components; Conducts vehicle safety inspection and performs routine and preventive maintenance on vehicles and various equipment; Inputs data for electronic documentation and records of repairs and maintenance to include maintaining and assisting in maintaining parts inventory; Performs all tire maintenance functions, including dismounting, repairing, remounting, and balancing of various tires in service on City equipment; Responds to road calls and performs on-site diagnostics and repairs on vehicles and equipment. Fabricates and installs a variety of parts and equipment and performs minor welding; Maintains and cleans tools and work areas and disposes of the hazardous waste following City guidelines; Keeps current with new technology and participates in various training activities. Follows applicable safety rules and regulations and performs other job-related duties as assigned. QUALIFICATIONS Possession of Automotive Service Excellence (ASE) certificates A-1, A-5, A-6, A-7, & A-8 a valid California Class B driver license. Possessing ASE certification as an Alternate Fuels Technician (Test F-1) is desirable AND one year of professional work experience as an automotive/equipment mechanic performing light vehicle repairs. Knowledgeable of fuel systems, emission control, gasoline, natural gas, and diesel engines, electrical systems, automotive and truck hydraulic systems, drivetrains, brake systems and air conditioning systems, lubrication and preventive maintenance and repair procedures; Skilled in the proper and safe use of tools and equipment including electronic diagnostic tools, handling and disposing of hazardous waste, troubleshooting and repairing vehicles in an efficient and timely manner, conducting safety inspections and maintaining a wide range of equipment and emergency vehicles, and in establishing and maintaining cooperative working relationships with City employees and vendors; Ability to perform heavy physical labor and work in cramped, close-quarter environments, lift, carry and move objects up to 70lbs complete and maintain logs and records accurately, learn and use required computer software applications, follow written and oral instructions, and work independently and as a team as needed. Proficient in operating office equipment, including computers and software, fax machines, copiers, scanners, and other specialized equipment, MS Office software packages, and other industry-related software. WORK ENVIRONMENT AND PHYSICAL REQUIREMENTS Work is performed in outdoor and service garage environments. Work may require frequent standing, walking, bending, and lifting 70 pounds. Incumbents may be exposed to repetitive motion, moving automotive parts, traffic, hazardous fumes, and chemicals. THE SELECTION PROCESS: The examination process consists of one or more of the following: (1) Training and Experience Evaluation, (2) a Written Exam, and (3) a Qualifications Appraisal Interview with a panel of subject matter experts. Candidates must receive a 70-100 to have their names on the active eligibility list for one year. The top three ranks on the Eligibility List will have their application materials forwarded to the hiring authority for a selection interview. Applicants whose experience best meets the City’s needs will be invited to participate in the examination process for this position. Candidates must have access to a computer with internet, video, and audio capabilities to participate in our examination process. The City of Inglewood is an Equal Opportunity Employer. It does not discriminate based on age, sex, race, religion, national origin, marital status, or handicap status in its employment actions, decisions, policies, and practice.
Apr 10, 2024
Applications will be accepted online at www.Cityofinglewood.org/jobs.aspx until a sufficient number of qualified applications have been received. Resumes are accepted but not in place of the official city employment application. Proof of education requirements/certifications must be submitted as a PDF via EMAIL to human_resources@cityofinglewood.org with the SUBJECT LINE: your name and job title applying for. Incomplete applications will be automatically rejected. POSITION: Under close supervision, troubleshoots maintains and repairs light transportation, construction, mechanical, emergency equipment, and passenger vehicles, including many vehicles operating on compressed natural gas (CNG). JOB TASKS Equipment and vehicles to service: As assigned by the Superintendent or designee, light vehicles and equipment, agriculture equipment, small construction units, trailers, emergency equipment, passenger vehicles, forklifts, weed Wacker’s, edger’s, lawn mowers, ATV’s, chippers, concrete saws, power washers, tampers, chain saws, including vehicles operating on compressed natural gas (CNG), hybrids & electric vehicles, light duty trucks, vans, and SUV’s from ¼ ton to 1 ton. Inspects, diagnoses, repairs, overhauls, and replaces systems and components, including but not limited to: brakes, engines transmissions, air conditioning, exhaust, and electrical systems, diesel, gasoline, and alternative fueling systems (e.g., Compressed Natural Gas [CNG], propane, and bio-fuel), hybrid and electric drive systems, emissions; automotive and truck hydraulic systems; and related computer-controlled components; Conducts vehicle safety inspection and performs routine and preventive maintenance on vehicles and various equipment; Inputs data for electronic documentation and records of repairs and maintenance to include maintaining and assisting in maintaining parts inventory; Performs all tire maintenance functions, including dismounting, repairing, remounting, and balancing of various tires in service on City equipment; Responds to road calls and performs on-site diagnostics and repairs on vehicles and equipment. Fabricates and installs a variety of parts and equipment and performs minor welding; Maintains and cleans tools and work areas and disposes of the hazardous waste following City guidelines; Keeps current with new technology and participates in various training activities. Follows applicable safety rules and regulations and performs other job-related duties as assigned. QUALIFICATIONS Possession of Automotive Service Excellence (ASE) certificates A-1, A-5, A-6, A-7, & A-8 a valid California Class B driver license. Possessing ASE certification as an Alternate Fuels Technician (Test F-1) is desirable AND one year of professional work experience as an automotive/equipment mechanic performing light vehicle repairs. Knowledgeable of fuel systems, emission control, gasoline, natural gas, and diesel engines, electrical systems, automotive and truck hydraulic systems, drivetrains, brake systems and air conditioning systems, lubrication and preventive maintenance and repair procedures; Skilled in the proper and safe use of tools and equipment including electronic diagnostic tools, handling and disposing of hazardous waste, troubleshooting and repairing vehicles in an efficient and timely manner, conducting safety inspections and maintaining a wide range of equipment and emergency vehicles, and in establishing and maintaining cooperative working relationships with City employees and vendors; Ability to perform heavy physical labor and work in cramped, close-quarter environments, lift, carry and move objects up to 70lbs complete and maintain logs and records accurately, learn and use required computer software applications, follow written and oral instructions, and work independently and as a team as needed. Proficient in operating office equipment, including computers and software, fax machines, copiers, scanners, and other specialized equipment, MS Office software packages, and other industry-related software. WORK ENVIRONMENT AND PHYSICAL REQUIREMENTS Work is performed in outdoor and service garage environments. Work may require frequent standing, walking, bending, and lifting 70 pounds. Incumbents may be exposed to repetitive motion, moving automotive parts, traffic, hazardous fumes, and chemicals. THE SELECTION PROCESS: The examination process consists of one or more of the following: (1) Training and Experience Evaluation, (2) a Written Exam, and (3) a Qualifications Appraisal Interview with a panel of subject matter experts. Candidates must receive a 70-100 to have their names on the active eligibility list for one year. The top three ranks on the Eligibility List will have their application materials forwarded to the hiring authority for a selection interview. Applicants whose experience best meets the City’s needs will be invited to participate in the examination process for this position. Candidates must have access to a computer with internet, video, and audio capabilities to participate in our examination process. The City of Inglewood is an Equal Opportunity Employer. It does not discriminate based on age, sex, race, religion, national origin, marital status, or handicap status in its employment actions, decisions, policies, and practice.
CITY OF ATLANTA, GA
Atlanta, Georgia, United States
At the City of Atlanta, we are passionate about building and improving our community. Our police officers, firefighters and building inspectors keep our citizens safe. Our Public Works staff keeps our City clean and helps maintain, build and improve our City’s infrastructure. Our City planners help envision and shape future City growth. Our Parks & Recreation professionals enhance our quality of life. Our engineers help keep our drinking water clean, the largest airport in the world (by passenger volume) operating and our buildings maintained. Along with the host of Finance, Procurement, and Human Resources professionals whose support is vital, we are the City of Atlanta! If you are seeking a meaningful role where you can make a real difference improving and growing our City, we welcome you to explore the job opportunities we have to offer. Posting Expires: Open Until Filled Salary: $18.23/hour General Description: The purpose of this job is to perform skilled/manual work functions associated with general maintenance of an assigned departments' facilities. Duties include, but are not limited to: directing activities, repairing and maintaining facilities and equipment; performing general construction, repair, and installation tasks; performing basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks; and maintaining the workshop area. This position may include duties which include trade specific responsibilities. General Description and Classification Standards: Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility Supervision Received: Works under very general supervision. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. Essential Duties & Responsibilities: Performs general construction, repair, and installation tasks such as installing/repairing appliances, doors, locks, fences, and plumbing fixtures; replacing windows; repairing gutters and roof leaks; assembling furniture or equipment; hanging pictures, blinds, guardrails, and fixtures; pulling cables; and moving furniture. Performs basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks such installing/repairing plumbing systems, gas pipe lines, and fuel pumps; soldering pipes; laying tile flooring; and troubleshooting minor electrical repairs. Maintains inventor levels of tools and materials• orders supplies as needed; picks up special parts from supplier as appropriate. Maintains a clean and orderly shop; picks up and disposes of refuge. Performs various tasks or errands as assigned such transporting employees, and delivering supplies or equipment. Provides training, guidance and direction to co-workers or assistants on projects. Perform supervisory duties as assigned. Provides assistance to other positions as needed. Responds to routine requests for information or assistance from members of the staff, the public or other individuals. Substitutes for co-workers in temporary absence of same. Communicates effectively with co-workers and other employees concerning work orders, problems, questions, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Answers the telephone; provides information, advice and guidance; takes and relays messages and/or directs calls to appropriate personnel; returns calls, as necessary. Plans and organizes daily work routine; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments and establishes a personal schedule accordingly. Plans and prepares for special projects on a monthly basis. Operates and maintains equipment, machinery and tools related to construction and maintenance projects which may include an aerial bucket truck, backhoe, arc welder, jackhammer, drill press, hammer drill, pipe threader machine, shovel, catch basin spoon, level, water/waste pump, water key, ladder, scaffolding, etc.; utilizes various tools which includes carpentry tools, masonry tools, electrical tools, hand tools, Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. style Record Keeping and Documentation. Reviews blueprints, drawings and diagrams. Receives various forms, work orders, invoices, reports, and other documents; completes, processes, and forwards as appropriate. Prepares/generates maintenance records, work reports, or other documentation; forwards as appropriate. Performs other related duties as required. Minimum Qualifications: High school diploma or GED required. Two (2) years of journeyman construction, carpentry, or building trades experience with a focus in HVAC, plumbing, welding and/or electrical preferred. A Georgia’s Class B commercial driver’s license (CDL) is preferred. DPR2024
Mar 08, 2024
Full Time
At the City of Atlanta, we are passionate about building and improving our community. Our police officers, firefighters and building inspectors keep our citizens safe. Our Public Works staff keeps our City clean and helps maintain, build and improve our City’s infrastructure. Our City planners help envision and shape future City growth. Our Parks & Recreation professionals enhance our quality of life. Our engineers help keep our drinking water clean, the largest airport in the world (by passenger volume) operating and our buildings maintained. Along with the host of Finance, Procurement, and Human Resources professionals whose support is vital, we are the City of Atlanta! If you are seeking a meaningful role where you can make a real difference improving and growing our City, we welcome you to explore the job opportunities we have to offer. Posting Expires: Open Until Filled Salary: $18.23/hour General Description: The purpose of this job is to perform skilled/manual work functions associated with general maintenance of an assigned departments' facilities. Duties include, but are not limited to: directing activities, repairing and maintaining facilities and equipment; performing general construction, repair, and installation tasks; performing basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks; and maintaining the workshop area. This position may include duties which include trade specific responsibilities. General Description and Classification Standards: Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility Supervision Received: Works under very general supervision. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. Essential Duties & Responsibilities: Performs general construction, repair, and installation tasks such as installing/repairing appliances, doors, locks, fences, and plumbing fixtures; replacing windows; repairing gutters and roof leaks; assembling furniture or equipment; hanging pictures, blinds, guardrails, and fixtures; pulling cables; and moving furniture. Performs basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks such installing/repairing plumbing systems, gas pipe lines, and fuel pumps; soldering pipes; laying tile flooring; and troubleshooting minor electrical repairs. Maintains inventor levels of tools and materials• orders supplies as needed; picks up special parts from supplier as appropriate. Maintains a clean and orderly shop; picks up and disposes of refuge. Performs various tasks or errands as assigned such transporting employees, and delivering supplies or equipment. Provides training, guidance and direction to co-workers or assistants on projects. Perform supervisory duties as assigned. Provides assistance to other positions as needed. Responds to routine requests for information or assistance from members of the staff, the public or other individuals. Substitutes for co-workers in temporary absence of same. Communicates effectively with co-workers and other employees concerning work orders, problems, questions, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Answers the telephone; provides information, advice and guidance; takes and relays messages and/or directs calls to appropriate personnel; returns calls, as necessary. Plans and organizes daily work routine; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments and establishes a personal schedule accordingly. Plans and prepares for special projects on a monthly basis. Operates and maintains equipment, machinery and tools related to construction and maintenance projects which may include an aerial bucket truck, backhoe, arc welder, jackhammer, drill press, hammer drill, pipe threader machine, shovel, catch basin spoon, level, water/waste pump, water key, ladder, scaffolding, etc.; utilizes various tools which includes carpentry tools, masonry tools, electrical tools, hand tools, Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. style Record Keeping and Documentation. Reviews blueprints, drawings and diagrams. Receives various forms, work orders, invoices, reports, and other documents; completes, processes, and forwards as appropriate. Prepares/generates maintenance records, work reports, or other documentation; forwards as appropriate. Performs other related duties as required. Minimum Qualifications: High school diploma or GED required. Two (2) years of journeyman construction, carpentry, or building trades experience with a focus in HVAC, plumbing, welding and/or electrical preferred. A Georgia’s Class B commercial driver’s license (CDL) is preferred. DPR2024
CITY OF ATLANTA, GA
Atlanta, Georgia, United States
At the City of Atlanta, we are passionate about building and improving our community. Our police officers, firefighters and building inspectors keep our citizens safe. Our Public Works staff keeps our City clean and helps maintain, build and improve our City’s infrastructure. Our City planners help envision and shape future City growth. Our Parks & Recreation professionals enhance our quality of life. Our engineers help keep our drinking water clean, the largest airport in the world (by passenger volume) operating and our buildings maintained. Along with the host of Finance, Procurement, and Human Resources professionals whose support is vital, we are the City of Atlanta! If you are seeking a meaningful role where you can make a real difference improving and growing our City, we welcome you to explore the job opportunities we have to offer. Posting Expires: Open Until Filled Salary: $18.23/hour General Description: The purpose of this job is to perform skilled/manual work functions associated with general maintenance of an assigned departments' facilities. Duties include, but are not limited to: directing activities, repairing and maintaining facilities and equipment; performing general construction, repair, and installation tasks; performing basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks; and maintaining the workshop area. This position may include duties which include trade specific responsibilities. General Description and Classification Standards: Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility Supervision Received: Works under very general supervision. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. Essential Duties & Responsibilities: Performs general construction, repair, and installation tasks such as installing/repairing appliances, doors, locks, fences, and plumbing fixtures; replacing windows; repairing gutters and roof leaks; assembling furniture or equipment; hanging pictures, blinds, guardrails, and fixtures; pulling cables; and moving furniture. Performs basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks such installing/repairing plumbing systems, gas pipe lines, and fuel pumps; soldering pipes; laying tile flooring; and troubleshooting minor electrical repairs. Maintains inventor levels of tools and materials• orders supplies as needed; picks up special parts from supplier as appropriate. Maintains a clean and orderly shop; picks up and disposes of refuge. Performs various tasks or errands as assigned such transporting employees, and delivering supplies or equipment. Provides training, guidance and direction to co-workers or assistants on projects. Perform supervisory duties as assigned. Provides assistance to other positions as needed. Responds to routine requests for information or assistance from members of the staff, the public or other individuals. Substitutes for co-workers in temporary absence of same. Communicates effectively with co-workers and other employees concerning work orders, problems, questions, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Answers the telephone; provides information, advice and guidance; takes and relays messages and/or directs calls to appropriate personnel; returns calls, as necessary. Plans and organizes daily work routine; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments and establishes a personal schedule accordingly. Plans and prepares for special projects on a monthly basis. Operates and maintains equipment, machinery and tools related to construction and maintenance projects which may include an aerial bucket truck, backhoe, arc welder, jackhammer, drill press, hammer drill, pipe threader machine, shovel, catch basin spoon, level, water/waste pump, water key, ladder, scaffolding, etc.; utilizes various tools which includes carpentry tools, masonry tools, electrical tools, hand tools, Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. style Record Keeping and Documentation. Reviews blueprints, drawings and diagrams. Receives various forms, work orders, invoices, reports, and other documents; completes, processes, and forwards as appropriate. Prepares/generates maintenance records, work reports, or other documentation; forwards as appropriate. Performs other related duties as required. Minimum Qualifications: High school diploma or GED required. Two (2) years of journeyman construction, carpentry, or building trades experience with a focus in HVAC, plumbing, welding and/or electrical preferred A Georgia’s Class B commercial driver’s license (CDL) is preferred. DPR2024
Mar 08, 2024
Full Time
At the City of Atlanta, we are passionate about building and improving our community. Our police officers, firefighters and building inspectors keep our citizens safe. Our Public Works staff keeps our City clean and helps maintain, build and improve our City’s infrastructure. Our City planners help envision and shape future City growth. Our Parks & Recreation professionals enhance our quality of life. Our engineers help keep our drinking water clean, the largest airport in the world (by passenger volume) operating and our buildings maintained. Along with the host of Finance, Procurement, and Human Resources professionals whose support is vital, we are the City of Atlanta! If you are seeking a meaningful role where you can make a real difference improving and growing our City, we welcome you to explore the job opportunities we have to offer. Posting Expires: Open Until Filled Salary: $18.23/hour General Description: The purpose of this job is to perform skilled/manual work functions associated with general maintenance of an assigned departments' facilities. Duties include, but are not limited to: directing activities, repairing and maintaining facilities and equipment; performing general construction, repair, and installation tasks; performing basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks; and maintaining the workshop area. This position may include duties which include trade specific responsibilities. General Description and Classification Standards: Participates in more complex and difficult work; serves as Lead Mechanic to oversee a work crew and/or a variety of tasks relative to the assigned area of responsibility Supervision Received: Works under very general supervision. May work independently or with other skilled or semi-skilled workers with responsibility for completion of assigned tasks. Essential Duties & Responsibilities: Performs general construction, repair, and installation tasks such as installing/repairing appliances, doors, locks, fences, and plumbing fixtures; replacing windows; repairing gutters and roof leaks; assembling furniture or equipment; hanging pictures, blinds, guardrails, and fixtures; pulling cables; and moving furniture. Performs basic plumbing, welding, electrical, carpentry, masonry, landscaping, and other tasks such installing/repairing plumbing systems, gas pipe lines, and fuel pumps; soldering pipes; laying tile flooring; and troubleshooting minor electrical repairs. Maintains inventor levels of tools and materials• orders supplies as needed; picks up special parts from supplier as appropriate. Maintains a clean and orderly shop; picks up and disposes of refuge. Performs various tasks or errands as assigned such transporting employees, and delivering supplies or equipment. Provides training, guidance and direction to co-workers or assistants on projects. Perform supervisory duties as assigned. Provides assistance to other positions as needed. Responds to routine requests for information or assistance from members of the staff, the public or other individuals. Substitutes for co-workers in temporary absence of same. Communicates effectively with co-workers and other employees concerning work orders, problems, questions, requests for assistance, and emergency situations. Communicates with supervisor any problems that arise; accepts supervisory instruction and direction. Answers the telephone; provides information, advice and guidance; takes and relays messages and/or directs calls to appropriate personnel; returns calls, as necessary. Plans and organizes daily work routine; establishes priorities for the completion of work in accordance with needs. Estimates expected time of completion of work assignments and establishes a personal schedule accordingly. Plans and prepares for special projects on a monthly basis. Operates and maintains equipment, machinery and tools related to construction and maintenance projects which may include an aerial bucket truck, backhoe, arc welder, jackhammer, drill press, hammer drill, pipe threader machine, shovel, catch basin spoon, level, water/waste pump, water key, ladder, scaffolding, etc.; utilizes various tools which includes carpentry tools, masonry tools, electrical tools, hand tools, Prepares checklist and performs routine preventative maintenance to buildings and equipment, as needed. Cleans and maintains equipment and supplies; assists in cleaning and maintaining workshop area. style Record Keeping and Documentation. Reviews blueprints, drawings and diagrams. Receives various forms, work orders, invoices, reports, and other documents; completes, processes, and forwards as appropriate. Prepares/generates maintenance records, work reports, or other documentation; forwards as appropriate. Performs other related duties as required. Minimum Qualifications: High school diploma or GED required. Two (2) years of journeyman construction, carpentry, or building trades experience with a focus in HVAC, plumbing, welding and/or electrical preferred A Georgia’s Class B commercial driver’s license (CDL) is preferred. DPR2024
CITY OF ATLANTA, GA
College Park, Georgia, United States
Hourly range: $18.16-$27.21 General Description and Classification Inspects and maintain airport grounds, roadways, fence lines, airfield grounds and hardscapes such as taxiways and runways, storm drains etc. Duties may include, but are not limited to: performing grounds maintenance, mowing, edging, pressure washing, spraying, FOD removal, commercial grade equipment usage, and snow and ice removal etc. within secured and unsecured areas of the airport. Areas include fence lines, guard rails, security gates, walkways, runways, roadways, taxiways, terminals etc. This a skilled position with moderate supervision, standard operating procedures with verbal and written instructions will apply. Essential Duties & Responsibilities These are typical responsibilities for this position and should not be construed as exclusive or all inclusive. Other duties may be assigned. Follow assigned instructions and task of Supervisor and or Lead Mechanic. Attend all assigned and or required training. Work daily with and in CMMS system. FOD / Trash removal airport wide Maintains airport grounds using both non-motorized and motorized equipment such as weed eaters, chain saws, blowers, mowers, sprayers etc. Conduct daily inspections of vehicles and ground equipment. Maintain airport grounds using tractors with decks, zero turns, remote control mowers skid steers, etc. Maintain airfield and roadways using sweepers, blowers, snow and ice equipment, dump trucks, etc. Maintain airport / airfield storm drains with use of vector truck and jetter Use commercial grade vehicles to assist with airfield and roadway / pavement repairs and snow and ice removal. Make repairs to SIDA and perimeter fence. Make repairs to pavement and concrete on airport properties including airfield. Maintain roadway and ramp area markings Knowledge Landscaping and landscaping equipment. Storm drains Pavement and pavement repair Airfield and roadway markings Snow and ice removal Minimum Qualifications and Experience 5+ years landscaping Commercial grade equipment operator Heavy Equipment operator Must have computer skills and knowledge of software programs such as a CMMS, Microsoft Word, Outlook, Excel, etc. Preferred Qualifications and Experience 7+ years landscaping Education / Certifications High school diploma or General Equivalency Diploma (GED). Trade / Technical school or higher - Preferred Licensures CDL Class B Airfield Movement Area - AMA (Internal) CDL Class A preferred Essential Capabilities and Work Environment Required physical, lifting, and sensory capabilities are requirements to perform the job successfully. Typical environmental conditions associated with job.
Mar 08, 2024
Full Time
Hourly range: $18.16-$27.21 General Description and Classification Inspects and maintain airport grounds, roadways, fence lines, airfield grounds and hardscapes such as taxiways and runways, storm drains etc. Duties may include, but are not limited to: performing grounds maintenance, mowing, edging, pressure washing, spraying, FOD removal, commercial grade equipment usage, and snow and ice removal etc. within secured and unsecured areas of the airport. Areas include fence lines, guard rails, security gates, walkways, runways, roadways, taxiways, terminals etc. This a skilled position with moderate supervision, standard operating procedures with verbal and written instructions will apply. Essential Duties & Responsibilities These are typical responsibilities for this position and should not be construed as exclusive or all inclusive. Other duties may be assigned. Follow assigned instructions and task of Supervisor and or Lead Mechanic. Attend all assigned and or required training. Work daily with and in CMMS system. FOD / Trash removal airport wide Maintains airport grounds using both non-motorized and motorized equipment such as weed eaters, chain saws, blowers, mowers, sprayers etc. Conduct daily inspections of vehicles and ground equipment. Maintain airport grounds using tractors with decks, zero turns, remote control mowers skid steers, etc. Maintain airfield and roadways using sweepers, blowers, snow and ice equipment, dump trucks, etc. Maintain airport / airfield storm drains with use of vector truck and jetter Use commercial grade vehicles to assist with airfield and roadway / pavement repairs and snow and ice removal. Make repairs to SIDA and perimeter fence. Make repairs to pavement and concrete on airport properties including airfield. Maintain roadway and ramp area markings Knowledge Landscaping and landscaping equipment. Storm drains Pavement and pavement repair Airfield and roadway markings Snow and ice removal Minimum Qualifications and Experience 5+ years landscaping Commercial grade equipment operator Heavy Equipment operator Must have computer skills and knowledge of software programs such as a CMMS, Microsoft Word, Outlook, Excel, etc. Preferred Qualifications and Experience 7+ years landscaping Education / Certifications High school diploma or General Equivalency Diploma (GED). Trade / Technical school or higher - Preferred Licensures CDL Class B Airfield Movement Area - AMA (Internal) CDL Class A preferred Essential Capabilities and Work Environment Required physical, lifting, and sensory capabilities are requirements to perform the job successfully. Typical environmental conditions associated with job.
CITY OF ATLANTA, GA
College Park, Georgia, United States
Hourly range: $17.26-$25.92 General Description and Classification Inspects and maintain airport grounds, roadways, fence lines, airfield grounds and hardscapes such as taxiways and runways, storm drains etc. Duties may include, but are not limited to: performing grounds maintenance, mowing, edging, pressure washing, spraying, FOD removal, commercial grade equipment usage, and snow and ice removal etc. within secured and unsecured areas of the airport. Areas include fence lines, guard rails, security gates, walkways, runways, roadways, taxiways, terminals etc. This a skilled position with moderate supervision, standard operating procedures with verbal and written instructions will apply. Essential Duties & Responsibilities These are typical responsibilities for this position and should not be construed as exclusive or all inclusive. Other duties may be assigned. Follow assigned instructions and task of Supervisor and or Lead Mechanic. Attend all assigned and or required training. Create and pull work orders for CMMS system. Pick up FOD / Trash to include entire airport property. Maintains airport grounds using both non-motorized and motorized equipment such as weed eaters, chain saws, blowers, mowers, sprayers etc. Conduct daily inspections of vehicles and ground equipment. Maintain airport grounds using tractors with decks, zero turns, remote control mowers skid steers, etc. Maintain airfield and roadways using sweepers, blowers, snow and ice equipment, dump trucks, etc. Maintain airport / airfield storm drains with use of vector truck and jetter Use commercial grade vehicles to assist with airfield and roadway / pavement repairs and snow and ice removal. Make repairs to SIDA and perimeter fence. Make repairs to pavement and concrete on airport properties including airfield. Striping and marking roadways and ramp areas Knowledge In depth knowledge of landscaping and landscaping equipment. Ability to inspect and operate landscaping equipment to include commercial grade vehicles, tractors with mowing decks, zero turns, and all hand held motorized landscaping equipment. Minimum Qualifications and Experience 3 - 7 years landscaping Commercial grade equipment operator Education / Certifications High school diploma or General Equivalency Diploma (GED). Trade or Technical school preferred Licensures CDL Class B preferred Essential Capabilities and Work Environment Required physical, lifting, and sensory capabilities are requirements to perform the job successfully. Typical environmental conditions associated with job.
Mar 08, 2024
Full Time
Hourly range: $17.26-$25.92 General Description and Classification Inspects and maintain airport grounds, roadways, fence lines, airfield grounds and hardscapes such as taxiways and runways, storm drains etc. Duties may include, but are not limited to: performing grounds maintenance, mowing, edging, pressure washing, spraying, FOD removal, commercial grade equipment usage, and snow and ice removal etc. within secured and unsecured areas of the airport. Areas include fence lines, guard rails, security gates, walkways, runways, roadways, taxiways, terminals etc. This a skilled position with moderate supervision, standard operating procedures with verbal and written instructions will apply. Essential Duties & Responsibilities These are typical responsibilities for this position and should not be construed as exclusive or all inclusive. Other duties may be assigned. Follow assigned instructions and task of Supervisor and or Lead Mechanic. Attend all assigned and or required training. Create and pull work orders for CMMS system. Pick up FOD / Trash to include entire airport property. Maintains airport grounds using both non-motorized and motorized equipment such as weed eaters, chain saws, blowers, mowers, sprayers etc. Conduct daily inspections of vehicles and ground equipment. Maintain airport grounds using tractors with decks, zero turns, remote control mowers skid steers, etc. Maintain airfield and roadways using sweepers, blowers, snow and ice equipment, dump trucks, etc. Maintain airport / airfield storm drains with use of vector truck and jetter Use commercial grade vehicles to assist with airfield and roadway / pavement repairs and snow and ice removal. Make repairs to SIDA and perimeter fence. Make repairs to pavement and concrete on airport properties including airfield. Striping and marking roadways and ramp areas Knowledge In depth knowledge of landscaping and landscaping equipment. Ability to inspect and operate landscaping equipment to include commercial grade vehicles, tractors with mowing decks, zero turns, and all hand held motorized landscaping equipment. Minimum Qualifications and Experience 3 - 7 years landscaping Commercial grade equipment operator Education / Certifications High school diploma or General Equivalency Diploma (GED). Trade or Technical school preferred Licensures CDL Class B preferred Essential Capabilities and Work Environment Required physical, lifting, and sensory capabilities are requirements to perform the job successfully. Typical environmental conditions associated with job.
CITY OF ATLANTA, GA
College Park, Georgia, United States
General Description and Classification Inspects and maintain airport grounds, roadways, fence lines, airfield grounds and hardscapes such as taxiways and runways, storm drains etc. Duties may include, but are not limited to: performing grounds maintenance, mowing, edging, pressure washing, spraying, FOD removal, commercial grade equipment usage, and snow and ice removal etc. within secured and unsecured areas of the airport. Areas include fence lines, guard rails, security gates, walkways, runways, roadways, taxiways, terminals etc. This a skilled position with moderate supervision, standard operating procedures with verbal and written instructions will apply. Essential Duties & Responsibilities These are typical responsibilities for this position and should not be construed as exclusive or all inclusive. Other duties may be assigned. Follow assigned instructions and task of Supervisor and or Lead Mechanic. Attend all assigned and or required training. Work daily with and in CMMS system. FOD / Trash removal airport wide Maintains airport grounds using both non-motorized and motorized equipment such as weed eaters, chain saws, blowers, mowers, sprayers etc. Conduct daily inspections of vehicles and ground equipment. Maintain airport grounds using tractors with decks, zero turns, remote control mowers skid steers, etc. Maintain airfield and roadways using sweepers, blowers, snow and ice equipment, dump trucks, etc. Maintain airport / airfield storm drains with use of vector truck and jetter Use commercial grade vehicles to assist with airfield and roadway / pavement repairs and snow and ice removal. Make repairs to SIDA and perimeter fence. Make repairs to pavement and concrete on airport properties including airfield. Maintain roadway and ramp area markings Knowledge Landscaping and landscaping equipment. Storm drains Pavement and pavement repair Airfield and roadway markings Snow and ice removal Minimum Qualifications and Experience 5+ years landscaping Commercial grade equipment operator Heavy Equipment operator Must have computer skills and knowledge of software programs such as a CMMS, Microsoft Word, Outlook, Excel, etc. Preferred Qualifications and Experience 7+ years landscaping Education / Certifications High school diploma or General Equivalency Diploma (GED). Trade / Technical school or higher - Preferred Licensures CDL Class B Airfield Movement Area - AMA (Internal) CDL Class A preferred Essential Capabilities and Work Environment Required physical, lifting, and sensory capabilities are requirements to perform the job successfully. Typical environmental conditions associated with job.
Mar 08, 2024
Full Time
General Description and Classification Inspects and maintain airport grounds, roadways, fence lines, airfield grounds and hardscapes such as taxiways and runways, storm drains etc. Duties may include, but are not limited to: performing grounds maintenance, mowing, edging, pressure washing, spraying, FOD removal, commercial grade equipment usage, and snow and ice removal etc. within secured and unsecured areas of the airport. Areas include fence lines, guard rails, security gates, walkways, runways, roadways, taxiways, terminals etc. This a skilled position with moderate supervision, standard operating procedures with verbal and written instructions will apply. Essential Duties & Responsibilities These are typical responsibilities for this position and should not be construed as exclusive or all inclusive. Other duties may be assigned. Follow assigned instructions and task of Supervisor and or Lead Mechanic. Attend all assigned and or required training. Work daily with and in CMMS system. FOD / Trash removal airport wide Maintains airport grounds using both non-motorized and motorized equipment such as weed eaters, chain saws, blowers, mowers, sprayers etc. Conduct daily inspections of vehicles and ground equipment. Maintain airport grounds using tractors with decks, zero turns, remote control mowers skid steers, etc. Maintain airfield and roadways using sweepers, blowers, snow and ice equipment, dump trucks, etc. Maintain airport / airfield storm drains with use of vector truck and jetter Use commercial grade vehicles to assist with airfield and roadway / pavement repairs and snow and ice removal. Make repairs to SIDA and perimeter fence. Make repairs to pavement and concrete on airport properties including airfield. Maintain roadway and ramp area markings Knowledge Landscaping and landscaping equipment. Storm drains Pavement and pavement repair Airfield and roadway markings Snow and ice removal Minimum Qualifications and Experience 5+ years landscaping Commercial grade equipment operator Heavy Equipment operator Must have computer skills and knowledge of software programs such as a CMMS, Microsoft Word, Outlook, Excel, etc. Preferred Qualifications and Experience 7+ years landscaping Education / Certifications High school diploma or General Equivalency Diploma (GED). Trade / Technical school or higher - Preferred Licensures CDL Class B Airfield Movement Area - AMA (Internal) CDL Class A preferred Essential Capabilities and Work Environment Required physical, lifting, and sensory capabilities are requirements to perform the job successfully. Typical environmental conditions associated with job.
City of Kansas City, MO
Kansas City, Missouri, United States
Several full-time positions available with the Parks & Recreation Department, Park Facility Maintenance located at 3515 NE 33rd Terr and the Water Department, Wastewater Treatment Division located at 7300 Hawthorne Road Salary Range: $22.61-$34.48/hour Normal Work Days/Hours: Parks: Monday - Friday 7:00 a.m.-3:30 p.m., Water: Monday-Friday, 6:30 a.m.-3:00 p.m. Application Deadline Date: Open Until Filled Responsibilities Parks: Performs maintenance on facilities including community centers, pools, fountains, cultural & nature centers, and museums. Inspects, repairs, and maintains boilers, hot water tanks, air compressors, HVAC equipment, water supply lines, plumbing fixtures, motors and related equipment. Repairs or replaces piping, valves, and other worn or damaged parts. Replaces packing and bearings on pumps. Performs remodeling duties including framing and installation of drywall, installation of electrical fixtures and wiring, and installation of plumbing fixtures and water lines. Assists in operation of snow removal equipment. Performs fire alarm and sprinkler system inspections. Responds to alarm activation for system check. Performs preventative maintenance tasks on various systems and buildings. Maintains work area in safe and organized manner. Water: Inspects, maintains, repairs, and troubleshoots equipment within the Wastewater Treatment Division. Multiple positions involve the performance of a variety of different maintenance jobs including pump repair and installations, gate and valve repair, welding, seal water systems, plumbing repairs, rigging, fabrication and troubleshooting or, carpentry, plumbing repair, and drainage systems. Performs construction, performing snow removal, equipment operation or, HVAC repair maintenance, service and installations, or boiler maintenance. Uses knowledge of computers and possesses the ability to read blueprints. Understands the importance of proper safety habits and knowledge of "lock out & tag out", and PPE Qualifications REQUIRES high school graduation and 4 years of experience in a variety of mechanical crafts; OR an equivalent combination of qualifying education and experience. Must possess a valid state-issued driver's license in accordance with City of KCMO policies. May be required to obtain a valid MO Class A, B, or C CDL prior to the end of the probationary period as determined by the department. Must pass a pre-employment drug screen and post-offer physical examination as prescribed by the City. Other Information URGENT!!! CRITICAL RECRUITMENT INFORMATION QUESTIONS REGARDING AVIATION POSITIONS SHOULD BE DIRECTED TO THE AVIATION DEPARTMENT AT 816-243-3010. Applications and/or resumes are evaluated on the information received by the application deadline. Please ensure that your application or resume clearly demonstrates how you meet the minimum qualifications for the position for which you are applying, this includes providing all relevant educational dates and a detailed description of relevant work experience, including months/years of employment. Applications and/or resumes may not be considered if information is incomplete. In order for a resume to be used in lieu of an application the resume must have been submitted online via the City's Applicant Tracking System. Positions requiring a high school diploma/GED certificate must be obtained from a school/program accredited by the Department of Education and recognized by the U.S. Secretary of Education. The minimum education requirement for positions that allow for experience equivalency for an accredited degree is a high school diploma. Unless otherwise specified, an accredited degree must be obtained from a college or university listed with the U.S. Department of Education and recognized by the U.S. Secretary of Education. For positions with a salary grade of EX6 or higher that require an accredited degree, qualifying professional experience must be obtained AFTER the accredited degree is obtained. Successful completion of a pre-employment criminal history/background check is required for all positions. Some positions require a post offer drug screen and/or physical. If appointed, non-residents must obtain residency inside Kansas City, Missouri's city limits within nine months. The City of KCMO is an equal opportunity employer that values diversity and inclusion in the workplace. The City is committed to providing a workplace environment for its employees and citizens free from discrimination based on race, color, sex (including pregnancy), national origin, religion, age, disability, marital status, genetic information, sexual orientation, or gender identity. For more information, please see our EEO Policy The City of KCMO is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please call 816-513-1908 or send an e-mail to accommodations@kcmo.org . If claiming military veterans' preference points, you must attach a copy of your DD-214 or a DD-256 (for reservists). To claim veterans' points you must have served 180 days of regular active duty service and be discharged or released under honorable conditions during peacetimes or 90 days of active duty service, one (1) day during "wartime" and a last discharge or release under honorable conditions. (DOD) 38 U.S. Code • 4211).
Mar 08, 2024
Full Time
Several full-time positions available with the Parks & Recreation Department, Park Facility Maintenance located at 3515 NE 33rd Terr and the Water Department, Wastewater Treatment Division located at 7300 Hawthorne Road Salary Range: $22.61-$34.48/hour Normal Work Days/Hours: Parks: Monday - Friday 7:00 a.m.-3:30 p.m., Water: Monday-Friday, 6:30 a.m.-3:00 p.m. Application Deadline Date: Open Until Filled Responsibilities Parks: Performs maintenance on facilities including community centers, pools, fountains, cultural & nature centers, and museums. Inspects, repairs, and maintains boilers, hot water tanks, air compressors, HVAC equipment, water supply lines, plumbing fixtures, motors and related equipment. Repairs or replaces piping, valves, and other worn or damaged parts. Replaces packing and bearings on pumps. Performs remodeling duties including framing and installation of drywall, installation of electrical fixtures and wiring, and installation of plumbing fixtures and water lines. Assists in operation of snow removal equipment. Performs fire alarm and sprinkler system inspections. Responds to alarm activation for system check. Performs preventative maintenance tasks on various systems and buildings. Maintains work area in safe and organized manner. Water: Inspects, maintains, repairs, and troubleshoots equipment within the Wastewater Treatment Division. Multiple positions involve the performance of a variety of different maintenance jobs including pump repair and installations, gate and valve repair, welding, seal water systems, plumbing repairs, rigging, fabrication and troubleshooting or, carpentry, plumbing repair, and drainage systems. Performs construction, performing snow removal, equipment operation or, HVAC repair maintenance, service and installations, or boiler maintenance. Uses knowledge of computers and possesses the ability to read blueprints. Understands the importance of proper safety habits and knowledge of "lock out & tag out", and PPE Qualifications REQUIRES high school graduation and 4 years of experience in a variety of mechanical crafts; OR an equivalent combination of qualifying education and experience. Must possess a valid state-issued driver's license in accordance with City of KCMO policies. May be required to obtain a valid MO Class A, B, or C CDL prior to the end of the probationary period as determined by the department. Must pass a pre-employment drug screen and post-offer physical examination as prescribed by the City. Other Information URGENT!!! CRITICAL RECRUITMENT INFORMATION QUESTIONS REGARDING AVIATION POSITIONS SHOULD BE DIRECTED TO THE AVIATION DEPARTMENT AT 816-243-3010. Applications and/or resumes are evaluated on the information received by the application deadline. Please ensure that your application or resume clearly demonstrates how you meet the minimum qualifications for the position for which you are applying, this includes providing all relevant educational dates and a detailed description of relevant work experience, including months/years of employment. Applications and/or resumes may not be considered if information is incomplete. In order for a resume to be used in lieu of an application the resume must have been submitted online via the City's Applicant Tracking System. Positions requiring a high school diploma/GED certificate must be obtained from a school/program accredited by the Department of Education and recognized by the U.S. Secretary of Education. The minimum education requirement for positions that allow for experience equivalency for an accredited degree is a high school diploma. Unless otherwise specified, an accredited degree must be obtained from a college or university listed with the U.S. Department of Education and recognized by the U.S. Secretary of Education. For positions with a salary grade of EX6 or higher that require an accredited degree, qualifying professional experience must be obtained AFTER the accredited degree is obtained. Successful completion of a pre-employment criminal history/background check is required for all positions. Some positions require a post offer drug screen and/or physical. If appointed, non-residents must obtain residency inside Kansas City, Missouri's city limits within nine months. The City of KCMO is an equal opportunity employer that values diversity and inclusion in the workplace. The City is committed to providing a workplace environment for its employees and citizens free from discrimination based on race, color, sex (including pregnancy), national origin, religion, age, disability, marital status, genetic information, sexual orientation, or gender identity. For more information, please see our EEO Policy The City of KCMO is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please call 816-513-1908 or send an e-mail to accommodations@kcmo.org . If claiming military veterans' preference points, you must attach a copy of your DD-214 or a DD-256 (for reservists). To claim veterans' points you must have served 180 days of regular active duty service and be discharged or released under honorable conditions during peacetimes or 90 days of active duty service, one (1) day during "wartime" and a last discharge or release under honorable conditions. (DOD) 38 U.S. Code • 4211).