New York State Office of Parks, Recreation & Historic Preservation
Babylon, New York, United States
Minimum Qualifications The Office of Parks, Recreation & Historic Preservation is hiring one position for the Professional Engineer 1 for one of the following parenthetics: Civil, Civil Construction, Civil Structural, Electrical, Environmental, Mechanical, or Mechanical HVAC. This title is part of the New York Hiring for Emergency Limited Placement Statewide Program (NY HELPS).* To be considered for appointment through NY HELPS, or 55 b/c, candidates must meet the open-competitive minimum qualifications for this position. The qualifications are: Either 1.) a New York State Professional Engineer’s license and current registration AND a qualifying bachelor’s degree** or higher as listed below Or 2.) a New York State Professional Engineer's license and current registration AND one year of full-time qualifying engineering experience as listed below. You must provide information regarding your license and current registration on your application materials. Professional Engineer 1 (Civil): Qualifying degrees: Civil Engineering, Civil Engineering Technology, Construction Engineering, Construction Engineering Technology, Construction Engineering Management, Construction Engineering Management Technology, Electrical Engineering, Electrical Engineering Technology, Electrical Power Engineering, Environmental Engineering, Environmental Engineering Technology, Environmental Design Engineering, Environmental Resources Engineering, Environmental Systems Engineering, Forest Engineering, Geological Engineering, Geotechnical Engineering, Hydraulics Engineering, Materials Engineering, Materials Science and Engineering, Mechanical Engineering, Mechanical Engineering Technology, Metallurgical and Materials Engineering, Structural Engineering, Transportation Engineering, Transportation Planning and Engineering, or Engineering Science with a recognized concentration in any of the above listed engineering degrees. Qualifying experience: One year of full-time engineering experience in the design and construction of parks, roads, bridges, recreational facilities, water and/or wastewater treatment facilities. Professional Engineer 1 (Civil/Construction): Qualifying degrees: Architectural Engineering, Architectural Engineering Technology, Building Engineering, Civil Engineering, Civil Engineering Technology, Construction Engineering, Construction Engineering Technology, Construction Engineering Management, Construction Engineering Management Technology, Electrical Engineering, Electrical Engineering Technology, Electrical Power Engineering, Environmental Engineering, Environmental Engineering Technology, Environmental Design Engineering, Environmental Resources Engineering, Environmental Systems Engineering, Geological Engineering, Geotechnical Engineering, Hydraulics Engineering, Materials Engineering, Materials Science and Engineering, Mechanical Engineering, Mechanical Engineering Technology, Metallurgical and Materials Engineering, Structural Engineering, or Engineering Science with a recognized concentration in any of the above listed engineering degrees. Qualifying experience: One year of full-time engineering experience related to construction project supervision of the structural and architectural elements of the building. Professional Engineer 1 (Civil/Structural): Qualifying degrees: Civil Engineering, Civil Engineering Technology, Materials Engineering, Materials Science and Engineering, Metallurgical and Materials Engineering, Structural Engineering, or Engineering Science with a recognized concentration in any of the above listed engineering degrees. Qualifying experience: One year of full-time engineering experience in the analysis and design of steel framing, concrete framing, concrete foundations and seismic design. Professional Engineer 1 (Electrical): Qualifying degrees: Computer Engineering, Computer Engineering Technology, Electrical and Computer Engineering, Electrical Engineering, Electrical Engineering Technology, Electrical and Electronics Engineering, Electrical Power Engineering, Electronics Engineering, Electronics Engineering Technology, or Engineering Science with a recognized concentration in any of the above listed engineering degrees. Qualifying experience: One year of full-time engineering experience in electrical systems. Professional Engineer 1 (Environmental) Qualifying degrees: Aeronautical Engineering, Aeronautical Engineering Technology, Chemical Engineering, Civil Engineering, Civil Engineering Technology, Environmental Engineering, Environmental Engineering Technology, Environmental Design Engineering, Environmental Resources Engineering, Environmental Systems Engineering, Forest Engineering, Geological Engineering, Geotechnical Engineering, Materials Engineering, Materials Science and Engineering, Mechanical Engineering, Mechanical Engineering Technology, Metallurgical and Materials Engineering, Paper Engineering, Petroleum Engineering, Plastics Engineering, Sanitary Engineering, Soil and Water Resources Engineering, Water Resources Engineering, or Engineering Science with a recognized concentration in any of the above listed engineering degrees. Qualifying experience: One year of full-time experience in sanitary, public health or environmental engineering. Professional Engineer 1 (Mechanical): Qualifying degrees: Aerospace Engineering, Architectural Engineering, Architectural Engineering Technology, Building Engineering, Construction Engineering, Construction Engineering Technology, Construction Engineering Management, Construction Engineering Management Technology, Fire Protection Engineering, Mechanical Engineering, Mechanical Engineering Technology, Nuclear Engineering, Nuclear Engineering Technology, or Engineering Science with a recognized concentration in any of the above listed engineering degrees. Qualifying experience: One year of full-time experience in mechanical engineering. Professional Engineer 1 (Mechanical/HVAC): Qualifying degrees: Aerospace Engineering, Mechanical Engineering, Mechanical Engineering Technology, or Engineering Science with a recognized concentration in any of the above listed engineering degrees. Qualifying experience: One year of full-time engineering experience in Mechanical/HVAC. **Your degree must have been awarded by a college or university accredited by a regional, national, or specialized agency recognized as an accrediting agency by the U.S. Department of Education/U.S. Secretary of Education. If your degree was awarded by an educational institution outside the United States or its territories, you must provide independent verification of equivalency. This information can be found at http://www.cs.ny.gov/jobseeker/degrees.cfm. Candidates are responsible for the evaluation fee. Candidates may also be qualified for permanent competitive appointment if reachable from the appropriate Civil Service eligible list or eligible for reassignment or transfer in accordance with Civil Service Law. Transfer Opportunity: Candidates must be current New York State employees and have one year of permanent competitive or 55-b/55-c service in a title eligible for transfer under Section 52.6 or 70.1 of the Civil Service Law. Section 70.1 Transfer: Candidates must have one year of permanent competitive or 55b/c service as a Professional Engineer 1 with one of the following parenthetical title designations: Mechanical, Mechanical/HVAC, Electrical, Civil, Civil/Construction, Civil/Geotechnical, Civil/Structural, Civil/Transportation, Environmental, Industrial or Fire Protection AND possess a New York State Professional Engineer’s license and current registration. 52.7 Non-Competitive Promotion (NCP) Qualifications: If 3 or fewer qualified Office of Parks, Recreation and Historic Preservation Assistant Engineer (Civil, Civil Construction, Civil Structural, Electrical, Environmental, Mechanical, or Mechanical HVAC) respond to this posting, Civil Service may approve the permanent appointment of one of the qualified candidates without further examination. The minimum qualifications for NCP appointment are: You must have a New York State Professional Engineers license and current registration, and one year of service as an Assistant Engineer (Civil, Civil Construction, Civil Structural, Electrical, Environmental, Mechanical, or Mechanical HVAC). Note: Non-competitive refers to not competing in an examination; the appointment will be competitive. Duties Description As a Professional Engineer 1, responsibilities include but are not limited to: • Overseeing consultant and contract work; preparing scope of work for and administers contracts, including the review of the technical components. • Developing, implementing, and overseeing the preparation of plans for historic sites, parks, recreational, and other facilities. • Managing projects from inception to construction closeout, with both in house and consultant resources. • Reviewing work activities for quality and conformity to professional standards, NYS code, environmental requirements and standards for accessibility. • Performing and/or managing the preparation of contract drawings and specifications. • Preparing graphics and presentations to communicate design intent for internal and public presentations. • Reviewing, approving, and signing/sealing engineering plans, estimates, specifications, contracts, completed work, contract changes and payments. Manage contractor work activities, assuring that work is completed in accordance with plans and contracts. • Coordinating work activities with park management to assure that work is completed in accordance with other programs and project deadlines. • Coordinating the work of other professional and technical staff assigned to a project; review and approve procedures, guidelines, and specifications and contract documents. • Coordinating and working with other local, county, state and federal agencies as necessary. • Consulting with park management and other stakeholders to obtain input, resolve problems, discuss and coordinate related developments, and explain projects and programs. • Assuring work is performed within budget and on schedule, reviewing and recommending payments, and assuring that documents and reports comply with code and conform with standards; and schedules and completes topographical surveys and soil investigations. • Supervising lower-level staff with design development, construction documents creation and project implementation. Additional Comments The posted hiring rate is the sum of the statutory hiring rate for PS&T Grade 24 ($88,639) and the Downstate Adjustment ($3,400). The posted job rate is the sum of the statutory job rate ($111,897) and the Downstate Adjustment ($3,400). Operational Needs: • Must possess and maintain a valid driver’s license that allows the candidate to legally operate a motor vehicle in New York State as a term and condition of employment. • Must be proficient with MS Outlook, Word and Excel, and AutoCAD. • Must be willing to work in the field in inclement weather conditions as needed. • Must be willing and able to work closely with subordinate staff on projects to provide direction and expertise on job sites. • Previous experience managing or supervising personnel is strongly preferred. • Must have the ability to communicate effectively and in a positive manner with staff and the public. BENEFITS: Generous benefits package, worth approximately 65% of salary, including: • Vacation, Sick, Personal Leave and Holiday for a total of 44 days (13 Vacation days, 13 Sick days, and 5 Personal Leave days, 13 Holidays) • Health Care Benefits: • Eligible employees and dependents can pick from a variety of affordable health insurance programs • Family dental and vision benefits at no additional cost Additional Benefits: • New York State Employees’ Retirement System (ERS) Membership • NYS Deferred Compensation • Access to NY 529 and NY ABLE College Savings Programs, as well as U.S. Savings Bonds • Public Service Loan Forgiveness (PSLF) • Paid Parental / Family Leave Learn more about our benefits for permanent state employees, visit: https://parks.ny.gov/employment/benefits.aspx **NY HELPS PROGRAM *For the duration of the NY HELPS Program, this title maybe filled via a non-competitive appointment, which means no examination is required but all candidates must meet the minimum qualifications of the title for which they apply. At this time, agencies may recruit and hire employees by making temporary appointments. In May 2024, if a temporary NY HELPS employee is satisfactorily performing in the position, the appointment will be changed from temporary pending Civil Service Commission Action to permanent non-competitive and the official probationary period will begin. At a future date (within one year of permanent appointment), it is expected employees hired under NY HELPS will have their non-competitive employment status converted to competitive status, without having to compete in an examination. Employees will then be afforded with all of the same rights and privileges of competitive class employees of New York State. While serving permanently in a NY HELPS title, employees may take part in any promotion examination for which they are qualified. Some positions may require additional credentials or a background check to verify your identity. Closing Date/Time: 04/18/24
Apr 05, 2024
Full Time
Minimum Qualifications The Office of Parks, Recreation & Historic Preservation is hiring one position for the Professional Engineer 1 for one of the following parenthetics: Civil, Civil Construction, Civil Structural, Electrical, Environmental, Mechanical, or Mechanical HVAC. This title is part of the New York Hiring for Emergency Limited Placement Statewide Program (NY HELPS).* To be considered for appointment through NY HELPS, or 55 b/c, candidates must meet the open-competitive minimum qualifications for this position. The qualifications are: Either 1.) a New York State Professional Engineer’s license and current registration AND a qualifying bachelor’s degree** or higher as listed below Or 2.) a New York State Professional Engineer's license and current registration AND one year of full-time qualifying engineering experience as listed below. You must provide information regarding your license and current registration on your application materials. Professional Engineer 1 (Civil): Qualifying degrees: Civil Engineering, Civil Engineering Technology, Construction Engineering, Construction Engineering Technology, Construction Engineering Management, Construction Engineering Management Technology, Electrical Engineering, Electrical Engineering Technology, Electrical Power Engineering, Environmental Engineering, Environmental Engineering Technology, Environmental Design Engineering, Environmental Resources Engineering, Environmental Systems Engineering, Forest Engineering, Geological Engineering, Geotechnical Engineering, Hydraulics Engineering, Materials Engineering, Materials Science and Engineering, Mechanical Engineering, Mechanical Engineering Technology, Metallurgical and Materials Engineering, Structural Engineering, Transportation Engineering, Transportation Planning and Engineering, or Engineering Science with a recognized concentration in any of the above listed engineering degrees. Qualifying experience: One year of full-time engineering experience in the design and construction of parks, roads, bridges, recreational facilities, water and/or wastewater treatment facilities. Professional Engineer 1 (Civil/Construction): Qualifying degrees: Architectural Engineering, Architectural Engineering Technology, Building Engineering, Civil Engineering, Civil Engineering Technology, Construction Engineering, Construction Engineering Technology, Construction Engineering Management, Construction Engineering Management Technology, Electrical Engineering, Electrical Engineering Technology, Electrical Power Engineering, Environmental Engineering, Environmental Engineering Technology, Environmental Design Engineering, Environmental Resources Engineering, Environmental Systems Engineering, Geological Engineering, Geotechnical Engineering, Hydraulics Engineering, Materials Engineering, Materials Science and Engineering, Mechanical Engineering, Mechanical Engineering Technology, Metallurgical and Materials Engineering, Structural Engineering, or Engineering Science with a recognized concentration in any of the above listed engineering degrees. Qualifying experience: One year of full-time engineering experience related to construction project supervision of the structural and architectural elements of the building. Professional Engineer 1 (Civil/Structural): Qualifying degrees: Civil Engineering, Civil Engineering Technology, Materials Engineering, Materials Science and Engineering, Metallurgical and Materials Engineering, Structural Engineering, or Engineering Science with a recognized concentration in any of the above listed engineering degrees. Qualifying experience: One year of full-time engineering experience in the analysis and design of steel framing, concrete framing, concrete foundations and seismic design. Professional Engineer 1 (Electrical): Qualifying degrees: Computer Engineering, Computer Engineering Technology, Electrical and Computer Engineering, Electrical Engineering, Electrical Engineering Technology, Electrical and Electronics Engineering, Electrical Power Engineering, Electronics Engineering, Electronics Engineering Technology, or Engineering Science with a recognized concentration in any of the above listed engineering degrees. Qualifying experience: One year of full-time engineering experience in electrical systems. Professional Engineer 1 (Environmental) Qualifying degrees: Aeronautical Engineering, Aeronautical Engineering Technology, Chemical Engineering, Civil Engineering, Civil Engineering Technology, Environmental Engineering, Environmental Engineering Technology, Environmental Design Engineering, Environmental Resources Engineering, Environmental Systems Engineering, Forest Engineering, Geological Engineering, Geotechnical Engineering, Materials Engineering, Materials Science and Engineering, Mechanical Engineering, Mechanical Engineering Technology, Metallurgical and Materials Engineering, Paper Engineering, Petroleum Engineering, Plastics Engineering, Sanitary Engineering, Soil and Water Resources Engineering, Water Resources Engineering, or Engineering Science with a recognized concentration in any of the above listed engineering degrees. Qualifying experience: One year of full-time experience in sanitary, public health or environmental engineering. Professional Engineer 1 (Mechanical): Qualifying degrees: Aerospace Engineering, Architectural Engineering, Architectural Engineering Technology, Building Engineering, Construction Engineering, Construction Engineering Technology, Construction Engineering Management, Construction Engineering Management Technology, Fire Protection Engineering, Mechanical Engineering, Mechanical Engineering Technology, Nuclear Engineering, Nuclear Engineering Technology, or Engineering Science with a recognized concentration in any of the above listed engineering degrees. Qualifying experience: One year of full-time experience in mechanical engineering. Professional Engineer 1 (Mechanical/HVAC): Qualifying degrees: Aerospace Engineering, Mechanical Engineering, Mechanical Engineering Technology, or Engineering Science with a recognized concentration in any of the above listed engineering degrees. Qualifying experience: One year of full-time engineering experience in Mechanical/HVAC. **Your degree must have been awarded by a college or university accredited by a regional, national, or specialized agency recognized as an accrediting agency by the U.S. Department of Education/U.S. Secretary of Education. If your degree was awarded by an educational institution outside the United States or its territories, you must provide independent verification of equivalency. This information can be found at http://www.cs.ny.gov/jobseeker/degrees.cfm. Candidates are responsible for the evaluation fee. Candidates may also be qualified for permanent competitive appointment if reachable from the appropriate Civil Service eligible list or eligible for reassignment or transfer in accordance with Civil Service Law. Transfer Opportunity: Candidates must be current New York State employees and have one year of permanent competitive or 55-b/55-c service in a title eligible for transfer under Section 52.6 or 70.1 of the Civil Service Law. Section 70.1 Transfer: Candidates must have one year of permanent competitive or 55b/c service as a Professional Engineer 1 with one of the following parenthetical title designations: Mechanical, Mechanical/HVAC, Electrical, Civil, Civil/Construction, Civil/Geotechnical, Civil/Structural, Civil/Transportation, Environmental, Industrial or Fire Protection AND possess a New York State Professional Engineer’s license and current registration. 52.7 Non-Competitive Promotion (NCP) Qualifications: If 3 or fewer qualified Office of Parks, Recreation and Historic Preservation Assistant Engineer (Civil, Civil Construction, Civil Structural, Electrical, Environmental, Mechanical, or Mechanical HVAC) respond to this posting, Civil Service may approve the permanent appointment of one of the qualified candidates without further examination. The minimum qualifications for NCP appointment are: You must have a New York State Professional Engineers license and current registration, and one year of service as an Assistant Engineer (Civil, Civil Construction, Civil Structural, Electrical, Environmental, Mechanical, or Mechanical HVAC). Note: Non-competitive refers to not competing in an examination; the appointment will be competitive. Duties Description As a Professional Engineer 1, responsibilities include but are not limited to: • Overseeing consultant and contract work; preparing scope of work for and administers contracts, including the review of the technical components. • Developing, implementing, and overseeing the preparation of plans for historic sites, parks, recreational, and other facilities. • Managing projects from inception to construction closeout, with both in house and consultant resources. • Reviewing work activities for quality and conformity to professional standards, NYS code, environmental requirements and standards for accessibility. • Performing and/or managing the preparation of contract drawings and specifications. • Preparing graphics and presentations to communicate design intent for internal and public presentations. • Reviewing, approving, and signing/sealing engineering plans, estimates, specifications, contracts, completed work, contract changes and payments. Manage contractor work activities, assuring that work is completed in accordance with plans and contracts. • Coordinating work activities with park management to assure that work is completed in accordance with other programs and project deadlines. • Coordinating the work of other professional and technical staff assigned to a project; review and approve procedures, guidelines, and specifications and contract documents. • Coordinating and working with other local, county, state and federal agencies as necessary. • Consulting with park management and other stakeholders to obtain input, resolve problems, discuss and coordinate related developments, and explain projects and programs. • Assuring work is performed within budget and on schedule, reviewing and recommending payments, and assuring that documents and reports comply with code and conform with standards; and schedules and completes topographical surveys and soil investigations. • Supervising lower-level staff with design development, construction documents creation and project implementation. Additional Comments The posted hiring rate is the sum of the statutory hiring rate for PS&T Grade 24 ($88,639) and the Downstate Adjustment ($3,400). The posted job rate is the sum of the statutory job rate ($111,897) and the Downstate Adjustment ($3,400). Operational Needs: • Must possess and maintain a valid driver’s license that allows the candidate to legally operate a motor vehicle in New York State as a term and condition of employment. • Must be proficient with MS Outlook, Word and Excel, and AutoCAD. • Must be willing to work in the field in inclement weather conditions as needed. • Must be willing and able to work closely with subordinate staff on projects to provide direction and expertise on job sites. • Previous experience managing or supervising personnel is strongly preferred. • Must have the ability to communicate effectively and in a positive manner with staff and the public. BENEFITS: Generous benefits package, worth approximately 65% of salary, including: • Vacation, Sick, Personal Leave and Holiday for a total of 44 days (13 Vacation days, 13 Sick days, and 5 Personal Leave days, 13 Holidays) • Health Care Benefits: • Eligible employees and dependents can pick from a variety of affordable health insurance programs • Family dental and vision benefits at no additional cost Additional Benefits: • New York State Employees’ Retirement System (ERS) Membership • NYS Deferred Compensation • Access to NY 529 and NY ABLE College Savings Programs, as well as U.S. Savings Bonds • Public Service Loan Forgiveness (PSLF) • Paid Parental / Family Leave Learn more about our benefits for permanent state employees, visit: https://parks.ny.gov/employment/benefits.aspx **NY HELPS PROGRAM *For the duration of the NY HELPS Program, this title maybe filled via a non-competitive appointment, which means no examination is required but all candidates must meet the minimum qualifications of the title for which they apply. At this time, agencies may recruit and hire employees by making temporary appointments. In May 2024, if a temporary NY HELPS employee is satisfactorily performing in the position, the appointment will be changed from temporary pending Civil Service Commission Action to permanent non-competitive and the official probationary period will begin. At a future date (within one year of permanent appointment), it is expected employees hired under NY HELPS will have their non-competitive employment status converted to competitive status, without having to compete in an examination. Employees will then be afforded with all of the same rights and privileges of competitive class employees of New York State. While serving permanently in a NY HELPS title, employees may take part in any promotion examination for which they are qualified. Some positions may require additional credentials or a background check to verify your identity. Closing Date/Time: 04/18/24
King County, WA
Seattle, Washington, United States
Summary About the Role: The position provides an opportunity for an external candidate to apply their technical skills in HVAC, Odor Control, and other Building Mechanical work in wastewater treatment and conveyance. This position is an opportunity to work on a fun and collaborative team who is dedicated to design, process improvement, and producing quality products to improve the WTD Conveyance and Treatment systems. Candidates will be involved in pump station upgrades, treatment plant upgrades, and conveyance projects related to HVAC, Plumbing, and Odor Control. The following are on-going or upcoming projects: South Plant Odor Reduction, South Plant HVAC upgrades, South Plant Biogas Upgrade, Lakeland Hills Pump Station, Generator replacement projects. General design work on these projects includes replacement of multiple fans, AHUs, coils, and related appurtenances. Several upcoming projects will be delivered under non-traditional or collaborative delivery methods, such as Design-Build, General Contractor Construction Management, Construction Manager at Risk, and progressive Design-Build. This position performs work remotely and onsite. About the Team: Join our team dedicated to ensuring clean water for generations to come! With over 700 employees engaged in planning, designing, building, and operating treatment facilities, our agency is at the forefront of environmental stewardship. Success for us means upholding our legacy while promising future generations a pristine environment. We enforce regulations to reduce harmful waste discharge and actively educate the public and businesses on water quality protection. We prioritize accountability to our ratepayers and operate a well-managed agency that services over 2.3 million King County residents . Our regional wastewater treatment system not only sustains a healthy environment but also fuels economic development, fostering prosperity in our region. If you're passionate about making a difference and thrive in a collaborative environment, join us in our mission to safeguard our precious water resources. Commitment to Equity, Racial and Social Justice: King County, named after Dr. Martin Luther King, Jr., is a diverse and vibrant community that represents cultures from around the world. Our True North is to create a welcoming community where everyone can thrive. We prioritize equity, racial and social justice, making it a foundational and daily expectation for all employees. As a HVAC and Building Mechanical Engineer - Senior , you will actively apply these principles in all aspects of your work. Learn more about our commitment at http://www.kingcounty.gov/equity . Apply now for a rewarding career at the Wastewater Treatment Division of King County Department of Natural Resources & Parks (DNRP). Join our talented workforce in protecting and restoring the natural environment and promoting more resilient, sustainable, and equitable communities. Enjoy training, comprehensive benefits , and growth opportunities. Job Duties What You Will Be Doing : Review and implement system-wide changes to meet NFPA 820 and other regulatory requirements. Collaborate with plant and offsite personnel to assess the status of current equipment and devise plans for upgrades and replacements. Prepare public works and procurement contract documents and cost estimates to comply with County and State public bidding policy, including stamping and signing engineering plans as a licensed Professional Engineer. Serve as Project Engineer on County design projects. As Project Engineer, coordinate design with other engineering disciplines, the engineering design review team, and other team members; translate operational and maintenance requirements into terms the project team understands; review and consolidate technical comments from design reviews; serve as a single point of technical contact for the project to the Project Manager; develop work plan, schedule, and budget for the execution of designs for wastewater projects. Review consultant prepared plans and specifications to ensure conformity to the County's specifications, standards, and requirements. Perform Construction Service. Review shop drawings and technical documentation on products submitted by contractors, assist in the interpretation of specifications, advise on contractor compliance with contract documents, and review change orders when required by field personnel or as required by law. Update and maintain guide specifications, standard details, and other standards. Experience, Qualifications, Knowledge, Skills Qualifications You Bring : Eight (8) years of increasingly responsible engineering experience. Experience with building mechanical equipment. Demonstrated experience in solving complex technical issues within a multi-discipline work environment. Experience in managing multiple, high-profile, complex capital projects simultaneously within established timeframes and costs. Knowledge of mechanical and energy codes Competencies You Bring : Customer Focus - Building strong customer relationships and delivering customer centric solutions. Manages Complexity - Making sense of complex, high quantity, and sometimes contradictory, information to effectively solve problems. Optimized Work Processes: Knowing the most effective and efficient processes to get things done, with a focus on continuous improvement. Plans and Aligns - Planning and prioritizing work to meet commitments aligned with organizational goals. Action Oriented - Taking on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm. Collaborates - Building partnerships and working collaboratively with others to meet shared objectives. Interpersonal Savvy - Relating openly and comfortably with diverse groups of people. Self-Development - Actively seeking new ways to grow and be challenged using both formal and informal development channels. Manages Ambiguity - Operating effectively, even when things are not certain, or the way forward is not clear. Required Licenses: Registration as a Professional Engineer in the state of Washington. Washington State Driver's License. It Would Be Great if You Also Bring: Work experience with building mechanical equipment found in wastewater treatment plants, including various HVAC systems, fans, odor control, building mechanical systems, pumps, generators, piping and duct systems, valves, and damper. Familiarity with wastewater and/or industrial facilities and associated construction principles and techniques. Familiarity with NFPA820 Standard and requirements. Knowledge of Washington State mechanical and energy codes Ability to work with a diverse group of people from consultants, Operations and Maintenance, other County staff, as well as the general public and other stakeholders, is essential in ensuring that project schedules and contracts follow County standards. Ability to direct the work of technical wastewater engineering personnel and consultants on a project basis to produce coordinated engineering documents, including but not limited to, plans, specifications, and cost estimates that meet County Standards and public bidding requirements. Ability to develop, implement, monitor, and report on all aspects of an assigned capital project which include, but are not limited to, project goals and objectives, success factors, scope, schedule, budget, and change control. Ability to use collaborative processes to successfully execute projects involving a diverse group of people from a matrixed organization. Knowledge and awareness of racial bias and inequalities. Skills to identify and successfully address racial inequities in the workplace and in the services provided to customers and stakeholders. Ability to use software that supports the delivery of required work products, including Microsoft Word, Excel, Outlook, Teams, and databases, as well as any technical or specialty software programs required to perform the job functions. Supplemental Information Working Conditions: Remote and Onsite Work Details: Employees in this role work remotely from a home location, with onsite reporting requirements typically weekly. The frequency of onsite work is determined by business needs and may be adjusted accordingly. Onsite reporting locations may be at various King County worksites including the collaboration space at King Street Center (201 S. Jackson St, Seattle, WA 98104). This work arrangement promotes work-life-balance and reduces carbon footprint under the department's vision of Green Where We Work . Requirement: Employees must reside in Washington State and be within a reasonable distance to King County worksites to meet onsite reporting requirements. Work Schedule: This full-time position works a 40-hours work week. This position is exempt from the overtime provision of the Fair Labor Standard Act (FLSA) and is not overtime eligible. Union Representation: This position is represented by T echnical Employee's Association (TEA) Application and Selection Process: We welcome applications from all qualified applicants. We value diversity, diverse perspectives and life experience and encourage people of all backgrounds to apply. Application materials will be screened for clarity, completeness and alignment with the experience, qualifications, knowledge, and skills essential for this role to determine which candidates may be invited to participate in one or more panel interviews. To apply, submit a: Complete Application Resume Cover Letter Responses to the supplemental questions Note: Additional documents won't be considered during minimum qualification screening. W ho to Contact: For more information regarding this recruitment, please contact Diana Eberly at diana.eberly@kingcounty.gov Discover More About the Wastewater Treatment Division : Visit our website and check us out at Facebook , X (formerly Twitter) , Instagram , YouTube , and the WTD Blog . Discover More About DNRP: Visit our DNRP website , explore an interactive map of our recent accomplishments and check us out at Facebook , X (formerly Twitter) , LinkedIn , TikTok , Instagram , YouTube and Keeping King County Green News . Sign up for Job Alerts to be notified of additional career opportunities with King County. Select the Natural Resources category for DNRP opportunities and explore other categories of interest. Forbes named King County as one of Washington State's best employers. Together, with leadership and our employees, we're changing the way government delivers service and winning national recognition as a model of excellence. Are you ready to make a difference? Come join the team dedicated to serving one of the nation's best places to live, work and play. Guided by our "True North" , we are making King County a welcoming community where every person can thrive. We value diversity, inclusion and belonging in our workplace and workforce. To reach this goal we are committed to workforce equity. Equitable recruiting, support, and retention is how we will obtain the highest quality workforce in our region; a workforce that shares and will help advance our guiding principles - we are one team; we solve problems; we focus on the customer; we drive for results; we are racially just; we respect all people; we lead the way; and we are responsible stewards. We encourage people of all backgrounds and identities to apply, including Native American and people of color, immigrants, refugees, women, LGBTQ+, people living with disabilities, and veterans. King County is an Equal Employment Opportunity (EEO) Employer No person is unlawfully excluded from employment opportunities based on race, color, religion, national origin, sex (including gender identity, sexual orientation and pregnancy), age, genetic information, disability, veteran status, or other protected class. Our EEO policy applies to all employment actions, including but not limited to recruitment, hiring, selection for training, promotion, transfer, demotion, layoff, termination, rates of pay or other forms of compensation. To Apply If you are interested in pursuing this position, please follow the application instructions carefully. If you need this announcement in an alternate language or format, would like to request accommodation or assistance in the application or assessment process or if you have questions, please contact the recruiter listed on this job announcement. Closing Date/Time:
Apr 11, 2024
Full Time
Summary About the Role: The position provides an opportunity for an external candidate to apply their technical skills in HVAC, Odor Control, and other Building Mechanical work in wastewater treatment and conveyance. This position is an opportunity to work on a fun and collaborative team who is dedicated to design, process improvement, and producing quality products to improve the WTD Conveyance and Treatment systems. Candidates will be involved in pump station upgrades, treatment plant upgrades, and conveyance projects related to HVAC, Plumbing, and Odor Control. The following are on-going or upcoming projects: South Plant Odor Reduction, South Plant HVAC upgrades, South Plant Biogas Upgrade, Lakeland Hills Pump Station, Generator replacement projects. General design work on these projects includes replacement of multiple fans, AHUs, coils, and related appurtenances. Several upcoming projects will be delivered under non-traditional or collaborative delivery methods, such as Design-Build, General Contractor Construction Management, Construction Manager at Risk, and progressive Design-Build. This position performs work remotely and onsite. About the Team: Join our team dedicated to ensuring clean water for generations to come! With over 700 employees engaged in planning, designing, building, and operating treatment facilities, our agency is at the forefront of environmental stewardship. Success for us means upholding our legacy while promising future generations a pristine environment. We enforce regulations to reduce harmful waste discharge and actively educate the public and businesses on water quality protection. We prioritize accountability to our ratepayers and operate a well-managed agency that services over 2.3 million King County residents . Our regional wastewater treatment system not only sustains a healthy environment but also fuels economic development, fostering prosperity in our region. If you're passionate about making a difference and thrive in a collaborative environment, join us in our mission to safeguard our precious water resources. Commitment to Equity, Racial and Social Justice: King County, named after Dr. Martin Luther King, Jr., is a diverse and vibrant community that represents cultures from around the world. Our True North is to create a welcoming community where everyone can thrive. We prioritize equity, racial and social justice, making it a foundational and daily expectation for all employees. As a HVAC and Building Mechanical Engineer - Senior , you will actively apply these principles in all aspects of your work. Learn more about our commitment at http://www.kingcounty.gov/equity . Apply now for a rewarding career at the Wastewater Treatment Division of King County Department of Natural Resources & Parks (DNRP). Join our talented workforce in protecting and restoring the natural environment and promoting more resilient, sustainable, and equitable communities. Enjoy training, comprehensive benefits , and growth opportunities. Job Duties What You Will Be Doing : Review and implement system-wide changes to meet NFPA 820 and other regulatory requirements. Collaborate with plant and offsite personnel to assess the status of current equipment and devise plans for upgrades and replacements. Prepare public works and procurement contract documents and cost estimates to comply with County and State public bidding policy, including stamping and signing engineering plans as a licensed Professional Engineer. Serve as Project Engineer on County design projects. As Project Engineer, coordinate design with other engineering disciplines, the engineering design review team, and other team members; translate operational and maintenance requirements into terms the project team understands; review and consolidate technical comments from design reviews; serve as a single point of technical contact for the project to the Project Manager; develop work plan, schedule, and budget for the execution of designs for wastewater projects. Review consultant prepared plans and specifications to ensure conformity to the County's specifications, standards, and requirements. Perform Construction Service. Review shop drawings and technical documentation on products submitted by contractors, assist in the interpretation of specifications, advise on contractor compliance with contract documents, and review change orders when required by field personnel or as required by law. Update and maintain guide specifications, standard details, and other standards. Experience, Qualifications, Knowledge, Skills Qualifications You Bring : Eight (8) years of increasingly responsible engineering experience. Experience with building mechanical equipment. Demonstrated experience in solving complex technical issues within a multi-discipline work environment. Experience in managing multiple, high-profile, complex capital projects simultaneously within established timeframes and costs. Knowledge of mechanical and energy codes Competencies You Bring : Customer Focus - Building strong customer relationships and delivering customer centric solutions. Manages Complexity - Making sense of complex, high quantity, and sometimes contradictory, information to effectively solve problems. Optimized Work Processes: Knowing the most effective and efficient processes to get things done, with a focus on continuous improvement. Plans and Aligns - Planning and prioritizing work to meet commitments aligned with organizational goals. Action Oriented - Taking on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm. Collaborates - Building partnerships and working collaboratively with others to meet shared objectives. Interpersonal Savvy - Relating openly and comfortably with diverse groups of people. Self-Development - Actively seeking new ways to grow and be challenged using both formal and informal development channels. Manages Ambiguity - Operating effectively, even when things are not certain, or the way forward is not clear. Required Licenses: Registration as a Professional Engineer in the state of Washington. Washington State Driver's License. It Would Be Great if You Also Bring: Work experience with building mechanical equipment found in wastewater treatment plants, including various HVAC systems, fans, odor control, building mechanical systems, pumps, generators, piping and duct systems, valves, and damper. Familiarity with wastewater and/or industrial facilities and associated construction principles and techniques. Familiarity with NFPA820 Standard and requirements. Knowledge of Washington State mechanical and energy codes Ability to work with a diverse group of people from consultants, Operations and Maintenance, other County staff, as well as the general public and other stakeholders, is essential in ensuring that project schedules and contracts follow County standards. Ability to direct the work of technical wastewater engineering personnel and consultants on a project basis to produce coordinated engineering documents, including but not limited to, plans, specifications, and cost estimates that meet County Standards and public bidding requirements. Ability to develop, implement, monitor, and report on all aspects of an assigned capital project which include, but are not limited to, project goals and objectives, success factors, scope, schedule, budget, and change control. Ability to use collaborative processes to successfully execute projects involving a diverse group of people from a matrixed organization. Knowledge and awareness of racial bias and inequalities. Skills to identify and successfully address racial inequities in the workplace and in the services provided to customers and stakeholders. Ability to use software that supports the delivery of required work products, including Microsoft Word, Excel, Outlook, Teams, and databases, as well as any technical or specialty software programs required to perform the job functions. Supplemental Information Working Conditions: Remote and Onsite Work Details: Employees in this role work remotely from a home location, with onsite reporting requirements typically weekly. The frequency of onsite work is determined by business needs and may be adjusted accordingly. Onsite reporting locations may be at various King County worksites including the collaboration space at King Street Center (201 S. Jackson St, Seattle, WA 98104). This work arrangement promotes work-life-balance and reduces carbon footprint under the department's vision of Green Where We Work . Requirement: Employees must reside in Washington State and be within a reasonable distance to King County worksites to meet onsite reporting requirements. Work Schedule: This full-time position works a 40-hours work week. This position is exempt from the overtime provision of the Fair Labor Standard Act (FLSA) and is not overtime eligible. Union Representation: This position is represented by T echnical Employee's Association (TEA) Application and Selection Process: We welcome applications from all qualified applicants. We value diversity, diverse perspectives and life experience and encourage people of all backgrounds to apply. Application materials will be screened for clarity, completeness and alignment with the experience, qualifications, knowledge, and skills essential for this role to determine which candidates may be invited to participate in one or more panel interviews. To apply, submit a: Complete Application Resume Cover Letter Responses to the supplemental questions Note: Additional documents won't be considered during minimum qualification screening. W ho to Contact: For more information regarding this recruitment, please contact Diana Eberly at diana.eberly@kingcounty.gov Discover More About the Wastewater Treatment Division : Visit our website and check us out at Facebook , X (formerly Twitter) , Instagram , YouTube , and the WTD Blog . Discover More About DNRP: Visit our DNRP website , explore an interactive map of our recent accomplishments and check us out at Facebook , X (formerly Twitter) , LinkedIn , TikTok , Instagram , YouTube and Keeping King County Green News . Sign up for Job Alerts to be notified of additional career opportunities with King County. Select the Natural Resources category for DNRP opportunities and explore other categories of interest. Forbes named King County as one of Washington State's best employers. Together, with leadership and our employees, we're changing the way government delivers service and winning national recognition as a model of excellence. Are you ready to make a difference? Come join the team dedicated to serving one of the nation's best places to live, work and play. Guided by our "True North" , we are making King County a welcoming community where every person can thrive. We value diversity, inclusion and belonging in our workplace and workforce. To reach this goal we are committed to workforce equity. Equitable recruiting, support, and retention is how we will obtain the highest quality workforce in our region; a workforce that shares and will help advance our guiding principles - we are one team; we solve problems; we focus on the customer; we drive for results; we are racially just; we respect all people; we lead the way; and we are responsible stewards. We encourage people of all backgrounds and identities to apply, including Native American and people of color, immigrants, refugees, women, LGBTQ+, people living with disabilities, and veterans. King County is an Equal Employment Opportunity (EEO) Employer No person is unlawfully excluded from employment opportunities based on race, color, religion, national origin, sex (including gender identity, sexual orientation and pregnancy), age, genetic information, disability, veteran status, or other protected class. Our EEO policy applies to all employment actions, including but not limited to recruitment, hiring, selection for training, promotion, transfer, demotion, layoff, termination, rates of pay or other forms of compensation. To Apply If you are interested in pursuing this position, please follow the application instructions carefully. If you need this announcement in an alternate language or format, would like to request accommodation or assistance in the application or assessment process or if you have questions, please contact the recruiter listed on this job announcement. Closing Date/Time:
Marketing Statement Ride BART to a satisfying career that lets you both: 1) make a difference to Bay Area residents, and 2) enjoy excellent pay, benefits, and employment stability. BART is looking for people who like to be challenged, work in a fast-paced environment, and have a passion for connecting riders to work, school and other places they need to go. BART offers a competitive salary, comprehensive health benefits, paid time off, and the CalPERS retirement program. Job Summary Pay Rate $113,621.00 / annually (Minimum) to $172,136.00 / annually (Maximum) - (Non-Represented Pay Band 7) Initial salary is negotiable between $113,621.00 - $156,622.86, to commensurate with experience and education. Reports To Manager of Vehicle Systems Engineer or designee. Current Assignment This announcement will be used to establish a pool of eligible candidates for vacancies that may occur within the next twelve (12) months. The Senior Vehicle Systems Engineer (SVSE) will be responsible for solving more complex and difficult engineering problems. They will participate in the repair, overhaul, testing and evaluation of transit vehicles’ electrical, mechanical, electromechanical systems, software-controlled systems, TCMS, VATC, HVAC, friction brake, propulsion, diagnostic and special testing tools, and other components. Positions at this level possess a specialized, technical, or functional expertise and may exercise an independent judgement in the performance of all duties. The incumbent may perform other duties such as witness testing, documentation review, supporting shops as assigned by their manager. The selected candidates could be assigned to positions in the Vehicle Systems Engineering group or the Communications-Based Train Control group. Ideal candidate for the Vehicle Systems Engineering (VSE) group : The ideal candidate would have a degree in Electrical, Electronics or Computer-related Engineering with 3 years’ experience in systems engineering. They will demonstrate high competency in writing reports and technical procedures. They will be comfortable working in a shop environment. The ideal candidate will have the ability to express ideas and suggestions, influence without authority, and can seek solutions to challenges. In addition, he or she will have experience with time-sensitive projects, the ability to express ideas and suggestions, influence without authority, and strong problem-solving skills. Ideal candidate for the Communications-Based Train Control ( CBTC) group : The ideal candidate would have a degree in Electrical, Electronics or Computer-related Engineering with 3 years’ experience in systems engineering including train control modernization project experience. The BART Communications-Based Train Control (CBTC) makes use of the telecommunications between the train and trackside equipment for traffic management and infrastructure control. They will be comfortable working in a shop environment. The ideal candidate will have the ability to express ideas and suggestions, influence without authority, and can seek solutions to challenges. In addition, he or she will have experience with time-sensitive projects, the ability to express ideas and suggestions, influence without authority, and strong problem-solving skills. Selection Process Applications will be screened to assure that minimum qualifications are met. Those applicants who meet minimum qualifications will then be referred to the hiring department for the completion of further selection processes. The selection process for this position may include a skills/performance demonstration, a written examination, and a panel and/or individual interview. The successful candidate must have an employment history demonstrating reliability and dependability; provide copies of certificates, diplomas or other documents as required by law, including those establishing his/her right to work in the U. S; pass a pre-employment medical examination which may include a drug and alcohol screen, and which is specific to the essential job functions and requirements. Pre-employment processing will also include a background check. (Does not apply to current full-time District employees unless specific job requires additional evaluations). Examples of Duties Responsible for the more difficult and complex repair, overhaul, evaluation, and reliability of District transit vehicles including electrical, mechanical and electro-mechanical systems and components; investigates and determines the cause of major transit vehicle equipment failures. Develops and prepares technical specifications for new and rebuilt transit vehicles and components; oversees the testing and quality assurance of supplier materials. Provides technical support to the shops to ensure that the District’s revenue fleet’s HVAC systems are functioning well. Designs and specifies special testing and servicing equipment to troubleshoot and maintain various transit vehicle subsystems. Reviews assigned engineering drawings and documents; ensures contract compliance, the use of proper engineering methods and compatibility with other systems. Attends design review meetings and presents the District's position on new and rebuilt transit vehicle issues. Defines quality assurance criteria and inspection procedures for maintenance and repair of transit vehicles; audits maintenance staff to ensure compliance with standards. Determines District requirements for electrical and electro-mechanical subsystems; researches industry standards and incorporates into specifications as applicable. Analyzes complex vehicle equipment failures; develops, implements and documents resulting maintenance procedures and equipment design changes. Identifies and resolves transit vehicle project issues; resolves or refers to appropriate division. Trains assigned employees in their areas of work including vehicle systems engineering methods, procedures and techniques. Operates a variety of mechanical equipment in a safe and effective manner including electrical, mechanical and electro-mechanical test equipment. Reviews and approves/rejects drawings and other technical submittals from car builder for new D and E-car trains. Prepares a variety of analytical and statistical reports on program operations and activities. Attends and participates in professional group meetings; stays abreast of new trends and innovations in the field of transit vehicle systems engineering. Minimum Qualifications Education: Possession of a bachelor's degree in electrical engineering, mechanical engineering or related field from an accredited college or university. Experience: The equivalent of three (3) years of (full-time) professional verifiable electrical or mechanical transit vehicle systems engineering experience or related experience. Other Requirements: Certification as an Engineer-In-Training (EIT) is preferred. Working Conditions Environmental Conditions : Shop environment; high voltage noise, dust, grease, smoke, fumes, gases; office environment. Physical Conditions : May require maintaining physical condition necessary for walking, standing or sitting for prolonged periods of time; operating motorized equipment and vehicles; working or inspecting in confined spaces; working around heavy construction equipment; must be physically able to conduct field inspections and testing as assigned. Knowledge and Skills Knowledge of: Operations, services and activities of a comprehensive transit vehicle engineering program Key suppliers and sub-suppliers to the rail and transit industries Design principles and practices for rail and transit vehicles Principles of leadership and training Advanced principles and practices of mechanical or electrical engineering as may relate to transit vehicles Transit vehicle electrical and mechanical equipment and subsystems Operational characteristics of transit vehicles, systems and components Design and repair specifications for new and rebuilt transit vehicles and components Advanced principles and practices of engineering specification preparation and review Computers and applications utilized in transit vehicle diagnostics Operational characteristics of various mechanical testing equipment and tools Occupational hazards and standard safety practices Related Federal, State and local codes, laws and regulations Skill/Ability in: Independently performing the most difficult transit vehicle inspection, maintenance and repair engineering duties Interpreting, explaining and enforcing department policies and procedures Preparing design and maintenance specifications and drawings Operating a variety of mechanical, electrical and electronic testing equipment in a safe and effective manner Analyzing complex vehicle equipment failures and developing equipment design changes Reviewing engineering drawings and ensuring compliance with contract guidelines Evaluating and resolving complex transit vehicle engineering problems Preparing a variety of complex engineering drawings, specifications and reports Defining quality assurance criteria and inspection procedures for maintenance and repair of transit vehicles Organization and time management Understanding and following oral and written instructions Communicating clearly and concisely, both orally and in writing Establishing and maintaining effective working relationships with those contacted in the course of work Equal Employment Opportunity GroupBox1 The San Francisco Bay Area Rapid Transit District is an equal opportunity employer. Applicants shall not be discriminated against because of race, color, sex, sexual orientation, gender identity, gender expression, age (40 and above), religion, national origin (including language use restrictions), disability (mental and physical, including HIV and AIDS), ancestry, marital status, military status, veteran status, medical condition (cancer/genetic characteristics and information), or any protected category prohibited by local, state or federal laws. The BART Human Resources Department will make reasonable efforts in the examination process to accommodate persons with disabilities or for religious reasons. Please advise the Human Resources Department of any special needs in advance of the examination by emailing at least 5 days before your examination date at employment@bart.gov . Qualified veterans may be eligible to obtain additional veteran's credit in the selection process for this recruitment (effective Jan. 1, 2013). To obtain the credit, veterans must attach to the application a DD214 discharge document or proof of disability and complete/submit the Veteran's Preference Application no later than the closing date of the posting. For more information about this credit please go to the Veteran's Preference Policy and Application link at www.bart.gov/jobs . The San Francisco Bay Area Rapid Transit District (BART) prides itself in offering best in class benefits packages to employees of the District. Currently, the following benefits may be available to employees in this job classification. Highlights Medical Coverage (or $350/month if opted out) Dental Coverage Vision Insurance (Basic and Enhanced Plans Available) Retirement Plan through the CA Public Employees’ Retirement System (CalPERS) 2% @ 55 (Classic Members) 2% @ 62 (PEPRA Members) 3% at 50 (Safety Members - Classic) 2.7% @ 57 (Safety Members - PEPRA) Reciprocity available for existing members of many other public retirement systems (see BART website and/or CalPERS website for details) Money Purchase Pension Plan (in-lieu of participating in Social Security tax) 6.65% employer contribution up to annual maximum of $1,868.65 Deferred Compensation & Roth 457 Sick Leave Accruals (12 days per year) Vacation Accruals (3-6 weeks based on time worked w/ the District) Holidays: 9 observed holidays and 5 floating holidays Life Insurance w/ ability to obtain additional coverage Accidental Death and Dismemberment (AD&D) Insurance Survivor Benefits through BART Short-Term Disability Insurance Long-Term Disability Insurance Flexible Spending Accounts: Health and Dependent Care Commuter Benefits Free BART Passes for BART employees and eligible family members. Closing Date/Time: 2/3/2025 11:59 PM Pacific
Mar 07, 2024
Full Time
Marketing Statement Ride BART to a satisfying career that lets you both: 1) make a difference to Bay Area residents, and 2) enjoy excellent pay, benefits, and employment stability. BART is looking for people who like to be challenged, work in a fast-paced environment, and have a passion for connecting riders to work, school and other places they need to go. BART offers a competitive salary, comprehensive health benefits, paid time off, and the CalPERS retirement program. Job Summary Pay Rate $113,621.00 / annually (Minimum) to $172,136.00 / annually (Maximum) - (Non-Represented Pay Band 7) Initial salary is negotiable between $113,621.00 - $156,622.86, to commensurate with experience and education. Reports To Manager of Vehicle Systems Engineer or designee. Current Assignment This announcement will be used to establish a pool of eligible candidates for vacancies that may occur within the next twelve (12) months. The Senior Vehicle Systems Engineer (SVSE) will be responsible for solving more complex and difficult engineering problems. They will participate in the repair, overhaul, testing and evaluation of transit vehicles’ electrical, mechanical, electromechanical systems, software-controlled systems, TCMS, VATC, HVAC, friction brake, propulsion, diagnostic and special testing tools, and other components. Positions at this level possess a specialized, technical, or functional expertise and may exercise an independent judgement in the performance of all duties. The incumbent may perform other duties such as witness testing, documentation review, supporting shops as assigned by their manager. The selected candidates could be assigned to positions in the Vehicle Systems Engineering group or the Communications-Based Train Control group. Ideal candidate for the Vehicle Systems Engineering (VSE) group : The ideal candidate would have a degree in Electrical, Electronics or Computer-related Engineering with 3 years’ experience in systems engineering. They will demonstrate high competency in writing reports and technical procedures. They will be comfortable working in a shop environment. The ideal candidate will have the ability to express ideas and suggestions, influence without authority, and can seek solutions to challenges. In addition, he or she will have experience with time-sensitive projects, the ability to express ideas and suggestions, influence without authority, and strong problem-solving skills. Ideal candidate for the Communications-Based Train Control ( CBTC) group : The ideal candidate would have a degree in Electrical, Electronics or Computer-related Engineering with 3 years’ experience in systems engineering including train control modernization project experience. The BART Communications-Based Train Control (CBTC) makes use of the telecommunications between the train and trackside equipment for traffic management and infrastructure control. They will be comfortable working in a shop environment. The ideal candidate will have the ability to express ideas and suggestions, influence without authority, and can seek solutions to challenges. In addition, he or she will have experience with time-sensitive projects, the ability to express ideas and suggestions, influence without authority, and strong problem-solving skills. Selection Process Applications will be screened to assure that minimum qualifications are met. Those applicants who meet minimum qualifications will then be referred to the hiring department for the completion of further selection processes. The selection process for this position may include a skills/performance demonstration, a written examination, and a panel and/or individual interview. The successful candidate must have an employment history demonstrating reliability and dependability; provide copies of certificates, diplomas or other documents as required by law, including those establishing his/her right to work in the U. S; pass a pre-employment medical examination which may include a drug and alcohol screen, and which is specific to the essential job functions and requirements. Pre-employment processing will also include a background check. (Does not apply to current full-time District employees unless specific job requires additional evaluations). Examples of Duties Responsible for the more difficult and complex repair, overhaul, evaluation, and reliability of District transit vehicles including electrical, mechanical and electro-mechanical systems and components; investigates and determines the cause of major transit vehicle equipment failures. Develops and prepares technical specifications for new and rebuilt transit vehicles and components; oversees the testing and quality assurance of supplier materials. Provides technical support to the shops to ensure that the District’s revenue fleet’s HVAC systems are functioning well. Designs and specifies special testing and servicing equipment to troubleshoot and maintain various transit vehicle subsystems. Reviews assigned engineering drawings and documents; ensures contract compliance, the use of proper engineering methods and compatibility with other systems. Attends design review meetings and presents the District's position on new and rebuilt transit vehicle issues. Defines quality assurance criteria and inspection procedures for maintenance and repair of transit vehicles; audits maintenance staff to ensure compliance with standards. Determines District requirements for electrical and electro-mechanical subsystems; researches industry standards and incorporates into specifications as applicable. Analyzes complex vehicle equipment failures; develops, implements and documents resulting maintenance procedures and equipment design changes. Identifies and resolves transit vehicle project issues; resolves or refers to appropriate division. Trains assigned employees in their areas of work including vehicle systems engineering methods, procedures and techniques. Operates a variety of mechanical equipment in a safe and effective manner including electrical, mechanical and electro-mechanical test equipment. Reviews and approves/rejects drawings and other technical submittals from car builder for new D and E-car trains. Prepares a variety of analytical and statistical reports on program operations and activities. Attends and participates in professional group meetings; stays abreast of new trends and innovations in the field of transit vehicle systems engineering. Minimum Qualifications Education: Possession of a bachelor's degree in electrical engineering, mechanical engineering or related field from an accredited college or university. Experience: The equivalent of three (3) years of (full-time) professional verifiable electrical or mechanical transit vehicle systems engineering experience or related experience. Other Requirements: Certification as an Engineer-In-Training (EIT) is preferred. Working Conditions Environmental Conditions : Shop environment; high voltage noise, dust, grease, smoke, fumes, gases; office environment. Physical Conditions : May require maintaining physical condition necessary for walking, standing or sitting for prolonged periods of time; operating motorized equipment and vehicles; working or inspecting in confined spaces; working around heavy construction equipment; must be physically able to conduct field inspections and testing as assigned. Knowledge and Skills Knowledge of: Operations, services and activities of a comprehensive transit vehicle engineering program Key suppliers and sub-suppliers to the rail and transit industries Design principles and practices for rail and transit vehicles Principles of leadership and training Advanced principles and practices of mechanical or electrical engineering as may relate to transit vehicles Transit vehicle electrical and mechanical equipment and subsystems Operational characteristics of transit vehicles, systems and components Design and repair specifications for new and rebuilt transit vehicles and components Advanced principles and practices of engineering specification preparation and review Computers and applications utilized in transit vehicle diagnostics Operational characteristics of various mechanical testing equipment and tools Occupational hazards and standard safety practices Related Federal, State and local codes, laws and regulations Skill/Ability in: Independently performing the most difficult transit vehicle inspection, maintenance and repair engineering duties Interpreting, explaining and enforcing department policies and procedures Preparing design and maintenance specifications and drawings Operating a variety of mechanical, electrical and electronic testing equipment in a safe and effective manner Analyzing complex vehicle equipment failures and developing equipment design changes Reviewing engineering drawings and ensuring compliance with contract guidelines Evaluating and resolving complex transit vehicle engineering problems Preparing a variety of complex engineering drawings, specifications and reports Defining quality assurance criteria and inspection procedures for maintenance and repair of transit vehicles Organization and time management Understanding and following oral and written instructions Communicating clearly and concisely, both orally and in writing Establishing and maintaining effective working relationships with those contacted in the course of work Equal Employment Opportunity GroupBox1 The San Francisco Bay Area Rapid Transit District is an equal opportunity employer. Applicants shall not be discriminated against because of race, color, sex, sexual orientation, gender identity, gender expression, age (40 and above), religion, national origin (including language use restrictions), disability (mental and physical, including HIV and AIDS), ancestry, marital status, military status, veteran status, medical condition (cancer/genetic characteristics and information), or any protected category prohibited by local, state or federal laws. The BART Human Resources Department will make reasonable efforts in the examination process to accommodate persons with disabilities or for religious reasons. Please advise the Human Resources Department of any special needs in advance of the examination by emailing at least 5 days before your examination date at employment@bart.gov . Qualified veterans may be eligible to obtain additional veteran's credit in the selection process for this recruitment (effective Jan. 1, 2013). To obtain the credit, veterans must attach to the application a DD214 discharge document or proof of disability and complete/submit the Veteran's Preference Application no later than the closing date of the posting. For more information about this credit please go to the Veteran's Preference Policy and Application link at www.bart.gov/jobs . The San Francisco Bay Area Rapid Transit District (BART) prides itself in offering best in class benefits packages to employees of the District. Currently, the following benefits may be available to employees in this job classification. Highlights Medical Coverage (or $350/month if opted out) Dental Coverage Vision Insurance (Basic and Enhanced Plans Available) Retirement Plan through the CA Public Employees’ Retirement System (CalPERS) 2% @ 55 (Classic Members) 2% @ 62 (PEPRA Members) 3% at 50 (Safety Members - Classic) 2.7% @ 57 (Safety Members - PEPRA) Reciprocity available for existing members of many other public retirement systems (see BART website and/or CalPERS website for details) Money Purchase Pension Plan (in-lieu of participating in Social Security tax) 6.65% employer contribution up to annual maximum of $1,868.65 Deferred Compensation & Roth 457 Sick Leave Accruals (12 days per year) Vacation Accruals (3-6 weeks based on time worked w/ the District) Holidays: 9 observed holidays and 5 floating holidays Life Insurance w/ ability to obtain additional coverage Accidental Death and Dismemberment (AD&D) Insurance Survivor Benefits through BART Short-Term Disability Insurance Long-Term Disability Insurance Flexible Spending Accounts: Health and Dependent Care Commuter Benefits Free BART Passes for BART employees and eligible family members. Closing Date/Time: 2/3/2025 11:59 PM Pacific
Marketing Statement Ride BART to a satisfying career that lets you both: 1) make a difference to Bay Area residents, and 2) enjoy excellent pay, benefits, and employment stability. BART is looking for people who like to be challenged, work in a fast-paced environment, and have a passion for connecting riders to work, school and other places they need to go. BART offers a competitive salary, comprehensive health benefits, paid time off, and the CalPERS retirement program. Job Summary Pay Rate Non-Represented Pay Band E07 Annual Salary: $113,621.00 - $172,136.00 Note: The negotiable salary offer will be between $121,574.00/annually - $154,891.87/ annually (commensurate with experience and education) Note This job announcement will be used to establish a list of eligible candidates for vacancies that may occur within the next six (6) months. Reports To Manager of Mechanical Engineering Current Assignment The scope of the Mechanical Engineering Division includes development, planning, design, cost estimating, procurement, and engineering support during construction, commissioning, operations, and maintenance of assets including but not limited to those listed below. Scope additionally includes both code development and code analysis for peer, subordinate, and third-party designs and implementations: Fire protection includes wet standpipe, fire water sprinklers, under car deluge, chemical fire suppression, and peripherals. Vertical circulation equipment (escalators, hydraulic and traction elevators, wheelchair lifts). Facilities (HVAC, plumbing, pumps). Emergency tunnel ventilation. Shop and yard equipment including cranes, lifts, presses, lathes. Hydraulic and pneumatic fluid power systems. Electro-mechanical systems. Processes and systems such as train washers and water treatment plants. Ideal incumbents will possess the following skills beyond the minimum qualifications : Strong Mechanical Engineering skills and experience. Excellent problem-solving ability, including ability to overcome significant technical and logistical constraints. Excellent communication skills, including the ability to make clear presentations, produce concise technical reports, and explain complex/technical issues to BART management and leaders. Ability to work with multidisciplinary teams, including a strong stakeholder engagement - especially that of Maintenance and Operating partners. Ability to act as team lead and ability to oversee the work of supporting engineers and staff. Ability to handle such diverse aspects of the work as project scoping, planning, budgeting, requirements and needs analysis, alternatives analysis and recommendations, conceptual engineering, detailed design, implementation planning, installation coordination, cost estimating, performance measurement, and analysis. Understanding of critical path method scheduling. Ability to manage programs relying on different approaches to mechanical equipment maintenance. Willingness to respond to emergencies 24 hours a day, 7 days of the week, to work occasionally during overnight and weekend maintenance windows, and to work occasionally in noisy and dirty environments or in foul weather and in close proximity to moving trains. An understanding of electrical, mechanical, physical, and mathematical principles applicable to the BART train control, traction power, ventilation, HVAC, and other miscellaneous support systems and a keen interest in keeping up to date with emerging technology, developments, and trends in these areas with the shared responsibility of subject matter expert on Mechanical Assets. Examples of Duties Performs complex and advanced mechanical engineering project duties in the preparation of engineering design plans and specifications for the development, modification and maintenance of the District's ventilation, air conditioning, fire protection, rail vehicle, plumbing, escalators, elevators and other mechanical systems and equipment. Performs engineering design duties, prepares engineering design drawings and specifications, calculations and cost estimates; provides design support during construction. Inspects equipment or facility; analyzes and makes recommendations on engineering solutions for repair, modification and maintenance. Prepares and coordinates the preparation of construction feasibility studies and cost estimates; defines scope and develops conceptual plans; prepares mechanical engineering design project proposals for management review and approval. Provides assistance in obtaining outside consultant services; schedules consultant proposal submissions; participates in evaluating consultant proposals. Conducts field inspections and investigations at substantial and final completion states; analyzes and provides recommendations to maintenance divisions on complex problem identification and repairs. Coordinates engineering work with that of other engineering divisions and public agencies; administers control of required documentation for mechanical engineering projects. As assigned, may participate in the selection of engineering staff; provides or coordinates staff training; works with employees to correct deficiencies; implements discipline procedures; trains employees in their areas of work including electrical engineering methods, procedures and techniques. Initiates and evaluates design and field engineering changes during construction, takes field measurements of completed work; inspects construction at substantial and final completion stages. Prepares engineering reports, manuals and other correspondence related to work activities. Participates in the preparation and administration of the mechanical engineering program budget; submits budget recommendations; monitors expenditures. Recommends approval of and submits contractor's progress payment applications; maintains documentation of contract deficiencies. Attends and participates in professional group meetings; stays abreast of new trends and innovations in the field of mechanical engineering. As assigned, conducts field inspections, site investigations and field materials testing duties. Minimum Qualifications Education: Possession of a bachelor’s degree in Mechanical Engineering, or a closely related field from an accredited college or university. Experience : The equivalent of three (3) years of full-time professional verifiable mechanical engineering experience, or a closely related experience. License or Certificate: Registration as a Professional Engineer in the State of California. Other Requirements : Must possess a valid California driver’s license and have a satisfactory driving record. Must be physically able to conduct field inspections and testing as assigned. Substitution: Additional professional experience as outlined above may be substituted for the education on a year-for-year basis. A Bachelor’s degree is preferred. Knowledge and Skills Knowledge of : Operations, services and activities of a comprehensive mechanical engineering program Principles and practices of mechanical engineering design and construction Principles and practices of project scheduling and management Methods and techniques of field measuring and testing equipment Methods and techniques of conducting construction site inspection and investigation. Principles and practices of contract administration and management Terminology, methods, practices, and techniques used in technical engineering report preparation Advanced mathematical principles Principles and practices of engineering cost estimating Materials and construction methods related to mechanical engineering Principles of lead supervision and training Current office procedures, methods, and equipment including computers Specialized computer programs or systems utilized in mechanical engineering design and construction including CADD Related building codes, regulations and provisions Related Federal, State and local laws, codes and regulations Skill/ Ability in : Developing, reviewing, and modifying complex mechanical engineering plans, designs and specifications Leading, organizing and reviewing the work of lower-level engineering staff Interpreting and explaining District policies and procedures Preparing clear and concise reports Managing and administering mechanical engineering construction contracts Managing assigned mechanical engineering construction projects Performing field inspections and taking measurements Analyzing complex mechanical engineering problems, evaluating alternatives, and recommending solutions Developing engineering project work scopes, criteria, budgets and schedules Interpreting and preparing revisions to engineering plans, drawings, and specifications Conducting and overseeing field inspections, measurements, and testing Communicating clearly and concisely, both orally and in writing Establishing and maintaining effective working relationships with those contacted in the course of work including District officials and the general public Equal Employment Opportunity GroupBox1 The San Francisco Bay Area Rapid Transit District is an equal opportunity employer. Applicants shall not be discriminated against because of race, color, sex, sexual orientation, gender identity, gender expression, age (40 and above), religion, national origin (including language use restrictions), disability (mental and physical, including HIV and AIDS), ancestry, marital status, military status, veteran status, medical condition (cancer/genetic characteristics and information), or any protected category prohibited by local, state or federal laws. The BART Human Resources Department will make reasonable efforts in the examination process to accommodate persons with disabilities or for religious reasons. Please advise the Human Resources Department of any special needs in advance of the examination by emailing at least 5 days before your examination date at employment@bart.gov . Qualified veterans may be eligible to obtain additional veteran's credit in the selection process for this recruitment (effective Jan. 1, 2013). To obtain the credit, veterans must attach to the application a DD214 discharge document or proof of disability and complete/submit the Veteran's Preference Application no later than the closing date of the posting. For more information about this credit please go to the Veteran's Preference Policy and Application link at www.bart.gov/jobs . The San Francisco Bay Area Rapid Transit District (BART) prides itself in offering best in class benefits packages to employees of the District. Currently, the following benefits may be available to employees in this job classification. Highlights Medical Coverage (or $350/month if opted out) Dental Coverage Vision Insurance (Basic and Enhanced Plans Available) Retirement Plan through the CA Public Employees’ Retirement System (CalPERS) 2% @ 55 (Classic Members) 2% @ 62 (PEPRA Members) 3% at 50 (Safety Members - Classic) 2.7% @ 57 (Safety Members - PEPRA) Reciprocity available for existing members of many other public retirement systems (see BART website and/or CalPERS website for details) Money Purchase Pension Plan (in-lieu of participating in Social Security tax) 6.65% employer contribution up to annual maximum of $1,868.65 Deferred Compensation & Roth 457 Sick Leave Accruals (12 days per year) Vacation Accruals (3-6 weeks based on time worked w/ the District) Holidays: 9 observed holidays and 5 floating holidays Life Insurance w/ ability to obtain additional coverage Accidental Death and Dismemberment (AD&D) Insurance Survivor Benefits through BART Short-Term Disability Insurance Long-Term Disability Insurance Flexible Spending Accounts: Health and Dependent Care Commuter Benefits Free BART Passes for BART employees and eligible family members. Closing Date/Time: 4/26/2024 11:59 PM Pacific
Apr 15, 2024
Full Time
Marketing Statement Ride BART to a satisfying career that lets you both: 1) make a difference to Bay Area residents, and 2) enjoy excellent pay, benefits, and employment stability. BART is looking for people who like to be challenged, work in a fast-paced environment, and have a passion for connecting riders to work, school and other places they need to go. BART offers a competitive salary, comprehensive health benefits, paid time off, and the CalPERS retirement program. Job Summary Pay Rate Non-Represented Pay Band E07 Annual Salary: $113,621.00 - $172,136.00 Note: The negotiable salary offer will be between $121,574.00/annually - $154,891.87/ annually (commensurate with experience and education) Note This job announcement will be used to establish a list of eligible candidates for vacancies that may occur within the next six (6) months. Reports To Manager of Mechanical Engineering Current Assignment The scope of the Mechanical Engineering Division includes development, planning, design, cost estimating, procurement, and engineering support during construction, commissioning, operations, and maintenance of assets including but not limited to those listed below. Scope additionally includes both code development and code analysis for peer, subordinate, and third-party designs and implementations: Fire protection includes wet standpipe, fire water sprinklers, under car deluge, chemical fire suppression, and peripherals. Vertical circulation equipment (escalators, hydraulic and traction elevators, wheelchair lifts). Facilities (HVAC, plumbing, pumps). Emergency tunnel ventilation. Shop and yard equipment including cranes, lifts, presses, lathes. Hydraulic and pneumatic fluid power systems. Electro-mechanical systems. Processes and systems such as train washers and water treatment plants. Ideal incumbents will possess the following skills beyond the minimum qualifications : Strong Mechanical Engineering skills and experience. Excellent problem-solving ability, including ability to overcome significant technical and logistical constraints. Excellent communication skills, including the ability to make clear presentations, produce concise technical reports, and explain complex/technical issues to BART management and leaders. Ability to work with multidisciplinary teams, including a strong stakeholder engagement - especially that of Maintenance and Operating partners. Ability to act as team lead and ability to oversee the work of supporting engineers and staff. Ability to handle such diverse aspects of the work as project scoping, planning, budgeting, requirements and needs analysis, alternatives analysis and recommendations, conceptual engineering, detailed design, implementation planning, installation coordination, cost estimating, performance measurement, and analysis. Understanding of critical path method scheduling. Ability to manage programs relying on different approaches to mechanical equipment maintenance. Willingness to respond to emergencies 24 hours a day, 7 days of the week, to work occasionally during overnight and weekend maintenance windows, and to work occasionally in noisy and dirty environments or in foul weather and in close proximity to moving trains. An understanding of electrical, mechanical, physical, and mathematical principles applicable to the BART train control, traction power, ventilation, HVAC, and other miscellaneous support systems and a keen interest in keeping up to date with emerging technology, developments, and trends in these areas with the shared responsibility of subject matter expert on Mechanical Assets. Examples of Duties Performs complex and advanced mechanical engineering project duties in the preparation of engineering design plans and specifications for the development, modification and maintenance of the District's ventilation, air conditioning, fire protection, rail vehicle, plumbing, escalators, elevators and other mechanical systems and equipment. Performs engineering design duties, prepares engineering design drawings and specifications, calculations and cost estimates; provides design support during construction. Inspects equipment or facility; analyzes and makes recommendations on engineering solutions for repair, modification and maintenance. Prepares and coordinates the preparation of construction feasibility studies and cost estimates; defines scope and develops conceptual plans; prepares mechanical engineering design project proposals for management review and approval. Provides assistance in obtaining outside consultant services; schedules consultant proposal submissions; participates in evaluating consultant proposals. Conducts field inspections and investigations at substantial and final completion states; analyzes and provides recommendations to maintenance divisions on complex problem identification and repairs. Coordinates engineering work with that of other engineering divisions and public agencies; administers control of required documentation for mechanical engineering projects. As assigned, may participate in the selection of engineering staff; provides or coordinates staff training; works with employees to correct deficiencies; implements discipline procedures; trains employees in their areas of work including electrical engineering methods, procedures and techniques. Initiates and evaluates design and field engineering changes during construction, takes field measurements of completed work; inspects construction at substantial and final completion stages. Prepares engineering reports, manuals and other correspondence related to work activities. Participates in the preparation and administration of the mechanical engineering program budget; submits budget recommendations; monitors expenditures. Recommends approval of and submits contractor's progress payment applications; maintains documentation of contract deficiencies. Attends and participates in professional group meetings; stays abreast of new trends and innovations in the field of mechanical engineering. As assigned, conducts field inspections, site investigations and field materials testing duties. Minimum Qualifications Education: Possession of a bachelor’s degree in Mechanical Engineering, or a closely related field from an accredited college or university. Experience : The equivalent of three (3) years of full-time professional verifiable mechanical engineering experience, or a closely related experience. License or Certificate: Registration as a Professional Engineer in the State of California. Other Requirements : Must possess a valid California driver’s license and have a satisfactory driving record. Must be physically able to conduct field inspections and testing as assigned. Substitution: Additional professional experience as outlined above may be substituted for the education on a year-for-year basis. A Bachelor’s degree is preferred. Knowledge and Skills Knowledge of : Operations, services and activities of a comprehensive mechanical engineering program Principles and practices of mechanical engineering design and construction Principles and practices of project scheduling and management Methods and techniques of field measuring and testing equipment Methods and techniques of conducting construction site inspection and investigation. Principles and practices of contract administration and management Terminology, methods, practices, and techniques used in technical engineering report preparation Advanced mathematical principles Principles and practices of engineering cost estimating Materials and construction methods related to mechanical engineering Principles of lead supervision and training Current office procedures, methods, and equipment including computers Specialized computer programs or systems utilized in mechanical engineering design and construction including CADD Related building codes, regulations and provisions Related Federal, State and local laws, codes and regulations Skill/ Ability in : Developing, reviewing, and modifying complex mechanical engineering plans, designs and specifications Leading, organizing and reviewing the work of lower-level engineering staff Interpreting and explaining District policies and procedures Preparing clear and concise reports Managing and administering mechanical engineering construction contracts Managing assigned mechanical engineering construction projects Performing field inspections and taking measurements Analyzing complex mechanical engineering problems, evaluating alternatives, and recommending solutions Developing engineering project work scopes, criteria, budgets and schedules Interpreting and preparing revisions to engineering plans, drawings, and specifications Conducting and overseeing field inspections, measurements, and testing Communicating clearly and concisely, both orally and in writing Establishing and maintaining effective working relationships with those contacted in the course of work including District officials and the general public Equal Employment Opportunity GroupBox1 The San Francisco Bay Area Rapid Transit District is an equal opportunity employer. Applicants shall not be discriminated against because of race, color, sex, sexual orientation, gender identity, gender expression, age (40 and above), religion, national origin (including language use restrictions), disability (mental and physical, including HIV and AIDS), ancestry, marital status, military status, veteran status, medical condition (cancer/genetic characteristics and information), or any protected category prohibited by local, state or federal laws. The BART Human Resources Department will make reasonable efforts in the examination process to accommodate persons with disabilities or for religious reasons. Please advise the Human Resources Department of any special needs in advance of the examination by emailing at least 5 days before your examination date at employment@bart.gov . Qualified veterans may be eligible to obtain additional veteran's credit in the selection process for this recruitment (effective Jan. 1, 2013). To obtain the credit, veterans must attach to the application a DD214 discharge document or proof of disability and complete/submit the Veteran's Preference Application no later than the closing date of the posting. For more information about this credit please go to the Veteran's Preference Policy and Application link at www.bart.gov/jobs . The San Francisco Bay Area Rapid Transit District (BART) prides itself in offering best in class benefits packages to employees of the District. Currently, the following benefits may be available to employees in this job classification. Highlights Medical Coverage (or $350/month if opted out) Dental Coverage Vision Insurance (Basic and Enhanced Plans Available) Retirement Plan through the CA Public Employees’ Retirement System (CalPERS) 2% @ 55 (Classic Members) 2% @ 62 (PEPRA Members) 3% at 50 (Safety Members - Classic) 2.7% @ 57 (Safety Members - PEPRA) Reciprocity available for existing members of many other public retirement systems (see BART website and/or CalPERS website for details) Money Purchase Pension Plan (in-lieu of participating in Social Security tax) 6.65% employer contribution up to annual maximum of $1,868.65 Deferred Compensation & Roth 457 Sick Leave Accruals (12 days per year) Vacation Accruals (3-6 weeks based on time worked w/ the District) Holidays: 9 observed holidays and 5 floating holidays Life Insurance w/ ability to obtain additional coverage Accidental Death and Dismemberment (AD&D) Insurance Survivor Benefits through BART Short-Term Disability Insurance Long-Term Disability Insurance Flexible Spending Accounts: Health and Dependent Care Commuter Benefits Free BART Passes for BART employees and eligible family members. Closing Date/Time: 4/26/2024 11:59 PM Pacific
Marketing Statement Ride BART to a satisfying career that lets you both: 1) make a difference to Bay Area residents, and 2) enjoy excellent pay, benefits, and employment stability. BART is looking for people who like to be challenged, work in a fast-paced environment, and have a passion for connecting riders to work, school and other places they need to go. BART offers a competitive salary, comprehensive health benefits, paid time off, and the CalPERS retirement program. Job Summary Pay Rate $106,187.00 / annually (Minimum) to $160,874.00 / annually (Maximum) - (Non-Represented Pay Band 6) Initial salary is negotiable between $106,187.00 - $142,446.24, to commensurate with experience and education. Reports To Manager of Vehicle Systems Engineer or designee. Current Assignment This announcement will be used to establish a pool of eligible candidates for vacancies that may occur within the next twelve (12) months. The Vehicle Systems Engineer (VSE) will be responsible to perform professional engineering duties in support of the repair, overhaul, evaluation, reliability, and maintenance of BART transit vehicles. They will provide support for the engineering of the train control networks, automatic train control systems, door systems, HVAC systems, friction brakes and propulsion systems, software-driven control systems, auxiliary power supply systems, electrical/electronic systems, mechanical, electro-mechanical, pneumatic, and hydraulic systems and components. The incumbent will be directed to complete assigned REIs and work on testing, analysis, and design change and procedures. This assignment work will support the development of improved processes and designs related to the Legacy and Fleet of the Future (FOTF) vehicles and trains. The ideal candidate has technical skills in railcar engineering. They will have experience in diagnostics, equipment testing, and troubleshooting. They will have skills in investigating and determining the cause of major transit vehicle equipment failures by applying principles of root cause failure analysis. Demonstrate competency in writing reports and technical procedures. They will be comfortable working in a shop environment and working with component / electrical repairs. They will have a degree in Electrical or related engineering field. Selection Process Applications will be screened to assure that minimum qualifications are met. Those applicants who meet minimum qualifications will then be referred to the hiring department for the completion of further selection processes. The selection process for this position may include a skills/performance demonstration, a written examination, and a panel and/or individual interview. The successful candidate must have an employment history demonstrating reliability and dependability; provide copies of certificates, diplomas or other documents as required by law, including those establishing his/her right to work in the U. S; pass a pre-employment medical examination which may include a drug and alcohol screen, and which is specific to the essential job functions and requirements. Pre-employment processing will also include a background check. (Does not apply to current full-time District employees unless specific job requires additional evaluations). Examples of Duties Performs a variety of vehicle systems engineering duties in support of the design repair, overhaul, evalua tion, reliability and maintenance of District transit vehicles. Designs and specifies special testing and servicing equipment to troubleshoot and maintain transit vehicle subsystems. Investigates and determines cause of major transit vehicle equipment failures and provides required corrections or equipment design changes. Provides a variety of technical information in support of transit vehicle repair, engineering and design. Provides technical assistance in the location and disposition of transit vehicle parts and equipment. Participates in the analysis of vehicle equipment failures; develops, implements and documents resulting maintenance procedures and equipment design changes. Creates a variety of technical engineering drawings, specifications and documents; ensures contract compliance, the use of proper engineering methods and compatibility with other systems. Provides technical assistance in developing new advanced transit vehicle systems for use on District transit vehicles. Defines quality assurance criteria and inspection procedures for the maintenance and repair of transit vehicles; audits maintenance staff to ensure compliance with standards. Operates a variety of mechanical equipment in a safe and effective manner including electrical, mechanical and electro-mechanical test equipment. Attends and participates in professional group meetings; stays abreast of new trends and innovations in the field of transit vehicle systems engineering. Provides expert testimony in personal injury lawsuits against the District, as assigned. Minimum Qualifications Education : Possession of a bachelor’s degree in electrical engineering, mechanical engineering or a closely related field from an accredited college or university. Experience : The equivalent of two (2) years of (full-time) professional verifiable electrical or mechanical systems engineering experience, or related experience. Other Requirements : Must possess sufficient mobility to perform field inspections and investigations. Certification as an Engineer-In-Training (EIT) is preferred. Working Conditions Environmental Conditions : Shop environment; exposure to electrical energy; travel from site to site. Physical Conditions : Requires maintaining physical condition necessary for walking, standing or sitting for prolonged periods of time; operating motorized equipment and vehicles; working or inspecting in confined spaces; working around heavy construction equipment; must be physically able to conduct field inspections and testing as assigned. Knowledge and Skills Knowledge of : Operations, services and activities of a comprehensive transit vehicle engineering program Principles and practices of mechanical or electrical engineering as they relate to transit vehicles Transit vehicle electrical and mechanical equipment and subsystems Computers and applications utilized in vehicle diagnostics Principles and practices of engineering specification preparation and re view Materials and equipment utilized in testing and repairing transit vehicles Operational characteristics of various mechanical testing equipment and tools Occupational hazards and standard safety practices Related Federal, State and local codes, laws and regulations Skill/Ability in : Performing a variety of transit vehicle inspections, maintenance and repair engineering duties Operating a variety of vehicle testing equipment in a safe and effective manner Providing a variety of technical information in support of transit vehicle operations Analyzing vehicle equipment failures and developing equipment design changes Preparing a variety of complex engineering drawings and specifications Writing technical safety reports Defining quality assurance criteria and inspection procedures for maintenance and repair of transit vehicles Understanding and following oral and written instructions Communicating clearly and concisely, both orally and in writing Establishing and maintaining effective working relationships with those contacted in the course of work Equal Employment Opportunity GroupBox1 The San Francisco Bay Area Rapid Transit District is an equal opportunity employer. Applicants shall not be discriminated against because of race, color, sex, sexual orientation, gender identity, gender expression, age (40 and above), religion, national origin (including language use restrictions), disability (mental and physical, including HIV and AIDS), ancestry, marital status, military status, veteran status, medical condition (cancer/genetic characteristics and information), or any protected category prohibited by local, state or federal laws. The BART Human Resources Department will make reasonable efforts in the examination process to accommodate persons with disabilities or for religious reasons. Please advise the Human Resources Department of any special needs in advance of the examination by emailing at least 5 days before your examination date at employment@bart.gov . Qualified veterans may be eligible to obtain additional veteran's credit in the selection process for this recruitment (effective Jan. 1, 2013). To obtain the credit, veterans must attach to the application a DD214 discharge document or proof of disability and complete/submit the Veteran's Preference Application no later than the closing date of the posting. For more information about this credit please go to the Veteran's Preference Policy and Application link at www.bart.gov/jobs . The San Francisco Bay Area Rapid Transit District (BART) prides itself in offering best in class benefits packages to employees of the District. Currently, the following benefits may be available to employees in this job classification. Highlights Medical Coverage (or $350/month if opted out) Dental Coverage Vision Insurance (Basic and Enhanced Plans Available) Retirement Plan through the CA Public Employees’ Retirement System (CalPERS) 2% @ 55 (Classic Members) 2% @ 62 (PEPRA Members) 3% at 50 (Safety Members - Classic) 2.7% @ 57 (Safety Members - PEPRA) Reciprocity available for existing members of many other public retirement systems (see BART website and/or CalPERS website for details) Money Purchase Pension Plan (in-lieu of participating in Social Security tax) 6.65% employer contribution up to annual maximum of $1,868.65 Deferred Compensation & Roth 457 Sick Leave Accruals (12 days per year) Vacation Accruals (3-6 weeks based on time worked w/ the District) Holidays: 9 observed holidays and 5 floating holidays Life Insurance w/ ability to obtain additional coverage Accidental Death and Dismemberment (AD&D) Insurance Survivor Benefits through BART Short-Term Disability Insurance Long-Term Disability Insurance Flexible Spending Accounts: Health and Dependent Care Commuter Benefits Free BART Passes for BART employees and eligible family members. Closing Date/Time: 10/5/2025 11:59 PM Pacific
Apr 06, 2024
Full Time
Marketing Statement Ride BART to a satisfying career that lets you both: 1) make a difference to Bay Area residents, and 2) enjoy excellent pay, benefits, and employment stability. BART is looking for people who like to be challenged, work in a fast-paced environment, and have a passion for connecting riders to work, school and other places they need to go. BART offers a competitive salary, comprehensive health benefits, paid time off, and the CalPERS retirement program. Job Summary Pay Rate $106,187.00 / annually (Minimum) to $160,874.00 / annually (Maximum) - (Non-Represented Pay Band 6) Initial salary is negotiable between $106,187.00 - $142,446.24, to commensurate with experience and education. Reports To Manager of Vehicle Systems Engineer or designee. Current Assignment This announcement will be used to establish a pool of eligible candidates for vacancies that may occur within the next twelve (12) months. The Vehicle Systems Engineer (VSE) will be responsible to perform professional engineering duties in support of the repair, overhaul, evaluation, reliability, and maintenance of BART transit vehicles. They will provide support for the engineering of the train control networks, automatic train control systems, door systems, HVAC systems, friction brakes and propulsion systems, software-driven control systems, auxiliary power supply systems, electrical/electronic systems, mechanical, electro-mechanical, pneumatic, and hydraulic systems and components. The incumbent will be directed to complete assigned REIs and work on testing, analysis, and design change and procedures. This assignment work will support the development of improved processes and designs related to the Legacy and Fleet of the Future (FOTF) vehicles and trains. The ideal candidate has technical skills in railcar engineering. They will have experience in diagnostics, equipment testing, and troubleshooting. They will have skills in investigating and determining the cause of major transit vehicle equipment failures by applying principles of root cause failure analysis. Demonstrate competency in writing reports and technical procedures. They will be comfortable working in a shop environment and working with component / electrical repairs. They will have a degree in Electrical or related engineering field. Selection Process Applications will be screened to assure that minimum qualifications are met. Those applicants who meet minimum qualifications will then be referred to the hiring department for the completion of further selection processes. The selection process for this position may include a skills/performance demonstration, a written examination, and a panel and/or individual interview. The successful candidate must have an employment history demonstrating reliability and dependability; provide copies of certificates, diplomas or other documents as required by law, including those establishing his/her right to work in the U. S; pass a pre-employment medical examination which may include a drug and alcohol screen, and which is specific to the essential job functions and requirements. Pre-employment processing will also include a background check. (Does not apply to current full-time District employees unless specific job requires additional evaluations). Examples of Duties Performs a variety of vehicle systems engineering duties in support of the design repair, overhaul, evalua tion, reliability and maintenance of District transit vehicles. Designs and specifies special testing and servicing equipment to troubleshoot and maintain transit vehicle subsystems. Investigates and determines cause of major transit vehicle equipment failures and provides required corrections or equipment design changes. Provides a variety of technical information in support of transit vehicle repair, engineering and design. Provides technical assistance in the location and disposition of transit vehicle parts and equipment. Participates in the analysis of vehicle equipment failures; develops, implements and documents resulting maintenance procedures and equipment design changes. Creates a variety of technical engineering drawings, specifications and documents; ensures contract compliance, the use of proper engineering methods and compatibility with other systems. Provides technical assistance in developing new advanced transit vehicle systems for use on District transit vehicles. Defines quality assurance criteria and inspection procedures for the maintenance and repair of transit vehicles; audits maintenance staff to ensure compliance with standards. Operates a variety of mechanical equipment in a safe and effective manner including electrical, mechanical and electro-mechanical test equipment. Attends and participates in professional group meetings; stays abreast of new trends and innovations in the field of transit vehicle systems engineering. Provides expert testimony in personal injury lawsuits against the District, as assigned. Minimum Qualifications Education : Possession of a bachelor’s degree in electrical engineering, mechanical engineering or a closely related field from an accredited college or university. Experience : The equivalent of two (2) years of (full-time) professional verifiable electrical or mechanical systems engineering experience, or related experience. Other Requirements : Must possess sufficient mobility to perform field inspections and investigations. Certification as an Engineer-In-Training (EIT) is preferred. Working Conditions Environmental Conditions : Shop environment; exposure to electrical energy; travel from site to site. Physical Conditions : Requires maintaining physical condition necessary for walking, standing or sitting for prolonged periods of time; operating motorized equipment and vehicles; working or inspecting in confined spaces; working around heavy construction equipment; must be physically able to conduct field inspections and testing as assigned. Knowledge and Skills Knowledge of : Operations, services and activities of a comprehensive transit vehicle engineering program Principles and practices of mechanical or electrical engineering as they relate to transit vehicles Transit vehicle electrical and mechanical equipment and subsystems Computers and applications utilized in vehicle diagnostics Principles and practices of engineering specification preparation and re view Materials and equipment utilized in testing and repairing transit vehicles Operational characteristics of various mechanical testing equipment and tools Occupational hazards and standard safety practices Related Federal, State and local codes, laws and regulations Skill/Ability in : Performing a variety of transit vehicle inspections, maintenance and repair engineering duties Operating a variety of vehicle testing equipment in a safe and effective manner Providing a variety of technical information in support of transit vehicle operations Analyzing vehicle equipment failures and developing equipment design changes Preparing a variety of complex engineering drawings and specifications Writing technical safety reports Defining quality assurance criteria and inspection procedures for maintenance and repair of transit vehicles Understanding and following oral and written instructions Communicating clearly and concisely, both orally and in writing Establishing and maintaining effective working relationships with those contacted in the course of work Equal Employment Opportunity GroupBox1 The San Francisco Bay Area Rapid Transit District is an equal opportunity employer. Applicants shall not be discriminated against because of race, color, sex, sexual orientation, gender identity, gender expression, age (40 and above), religion, national origin (including language use restrictions), disability (mental and physical, including HIV and AIDS), ancestry, marital status, military status, veteran status, medical condition (cancer/genetic characteristics and information), or any protected category prohibited by local, state or federal laws. The BART Human Resources Department will make reasonable efforts in the examination process to accommodate persons with disabilities or for religious reasons. Please advise the Human Resources Department of any special needs in advance of the examination by emailing at least 5 days before your examination date at employment@bart.gov . Qualified veterans may be eligible to obtain additional veteran's credit in the selection process for this recruitment (effective Jan. 1, 2013). To obtain the credit, veterans must attach to the application a DD214 discharge document or proof of disability and complete/submit the Veteran's Preference Application no later than the closing date of the posting. For more information about this credit please go to the Veteran's Preference Policy and Application link at www.bart.gov/jobs . The San Francisco Bay Area Rapid Transit District (BART) prides itself in offering best in class benefits packages to employees of the District. Currently, the following benefits may be available to employees in this job classification. Highlights Medical Coverage (or $350/month if opted out) Dental Coverage Vision Insurance (Basic and Enhanced Plans Available) Retirement Plan through the CA Public Employees’ Retirement System (CalPERS) 2% @ 55 (Classic Members) 2% @ 62 (PEPRA Members) 3% at 50 (Safety Members - Classic) 2.7% @ 57 (Safety Members - PEPRA) Reciprocity available for existing members of many other public retirement systems (see BART website and/or CalPERS website for details) Money Purchase Pension Plan (in-lieu of participating in Social Security tax) 6.65% employer contribution up to annual maximum of $1,868.65 Deferred Compensation & Roth 457 Sick Leave Accruals (12 days per year) Vacation Accruals (3-6 weeks based on time worked w/ the District) Holidays: 9 observed holidays and 5 floating holidays Life Insurance w/ ability to obtain additional coverage Accidental Death and Dismemberment (AD&D) Insurance Survivor Benefits through BART Short-Term Disability Insurance Long-Term Disability Insurance Flexible Spending Accounts: Health and Dependent Care Commuter Benefits Free BART Passes for BART employees and eligible family members. Closing Date/Time: 10/5/2025 11:59 PM Pacific
Marketing Statement Ride BART to a satisfying career that lets you both: 1) make a difference to Bay Area residents, and 2) enjoy excellent pay, benefits, and employment stability. BART is looking for people who like to be challenged, work in a fast-paced environment, and have a passion for connecting riders to work, school and other places they need to go. BART offers a competitive salary, comprehensive health benefits, paid time off, and the CalPERS retirement program. Job Summary Pay Rate Non-Represented Pay Band E07 Annual Salary: $113,621.00 - $172,136.00 Note: The negotiable salary offer will be between $121,574.00/annually - $154,891.87/ annually (commensurate with experience and education) Note This job announcement will be used to establish a list of eligible candidates for vacancies that may occur within the next six (6) months. Reports To Manager of Traction Power Engineering Current Assignment This posting covers Senior Electrical Engineers within the Electrical and Traction Power Engineering Divisions of Office of Infrastructure Delivery (OID) Department at the Bay Area Rapid Transit District (BART). Senior Electrical Engineers have significant technical expertise, oversee projects, and are role models for more junior staff. The scope of the Electrical and Traction Power Engineering Divisions includes the development and modification of BART’s facilities and systems such as: Electrical Division (Lower Voltage - 4 KVAC and below) Responsible for complete electrical design and calculations for assets including: facility electrical power; cathodic protection; fire alarm systems; emergency lighting; power distribution, conversion, control, and storage systems; lighting; battery uninterruptible power supplies (UPS) and backup generators. Traction Power Division (Higher Voltage - 1KV DC, 35 KV AC and above) Responsible for complete electrical design and calculations for assets including: substations, switchgear, rectifiers, traction power distribution, utility power, protective relays and PLCs, grounding, transformers, and power & control cables. Education and experience preferred in the Electrical branch of Engineering. Desirable skills, capabilities, and experience are described, as follows: Beyond the minimum qualifications , The ideal Senior Electrical Engineers must have experience demonstrating Electrical Engineering skills with a minimum of 3 years of full time variable professional electrical engineering work experience in the field and office; prepare equipment specifications and procurement contracts; be familiar with current code requirements, and industry practices. Assignments include exercising lead supervision over BART and/or contracted staff, leading project teams, and coordinating with other engineering disciplines to ensure high quality designs. Senior Electrical Engineers provide leadership in multi-discipline project teams; are responsible for design integration, QA/QC, and coordinating the development of project scopes, schedules, and cost estimates. Candidates with a P.E. in a state other than California may be considered if a California P.E. is achieved within 6 months of hire date. Ideal incumbents will demonstrate the following skills beyond the minimum qualifications: Strong Electrical Engineering skills and experience. Excellent problem-solving ability. Excellent communication skills, including the ability to make clear presentations, produce concise technical reports, and explain complex/technical issues to BART management and leaders. Ability to work with multidisciplinary teams. Ability to handle such diverse aspects of the work as project scoping, planning, budgeting, requirements analysis, conceptual engineering, detailed design, implementation planning, installation coordination, performance measurement, and analysis. Understanding of Critical path method scheduling. Understanding of the different approaches to electrical equipment maintenance. Willingness to be on call 24 hours a day, 7 days at a time (in rotation with others), to work occasionally during overnight and weekend maintenance windows, and to work occasionally in noisy and dirty environments or in foul weather and in close proximity to moving trains. An understanding of electrical, mechanical, physical, and mathematical principles applicable to the BART train control, traction power, ventilation, HVAC, and other miscellaneous support systems and a keen interest in keeping up to date with emerging technology, developments, and trends in these areas. Examples of Duties Performs complex and advanced electrical engineering project duties in the preparation of engineering design plans and specifications for the District's electrical facilities and systems, including traction and utility power, corrosion protection, lighting and other equipment and systems. Performs engineering design duties; prepares engineering design drawings and specifications, calculations and cost estimates, provides design support during construction. Inspects equipment or facility; analyzes and makes recommendations on engineering solutions for repair, modification or maintenance. Prepares and coordinates the preparation of construction feasibility studies and cost estimates; defines scope and develops conceptual plans; prepares electrical engineering design project proposals for management review and approval. Provides assistance in obtaining outside consultant services; schedules consultant proposal submissions, participates in evaluation of consultant proposals. Coordinates engineering work with that of other engineering divisions and public agencies; administers control of required documentation for electrical engineering projects. As assigned, may participate in the selection of engineering staff; provides engineering guidance to lower level staff in their areas of work including electrical engineering design, methods, procedures and techniques. Initiates and evaluates design and field engineering changes during construction; takes field measurements of completed work; inspects construction at substantial and final completion stages; reviews, stamps, and signs design drawings as Engineer of record for construction contracts. Prepares engineering reports, manuals and other correspondence related to work activities. Participates in the preparation and administration of the electrical engineering program budget; submits budget recommendations; monitors expenditures. Recommends approval of and submits contractor's progress payment applications; maintains documentation of contract deficiencies. Attends and participates in professional group meetings; stays abreast of new trends and innovations in the field of electrical engineering. As assigned, conducts field inspections, site investigations and field materials testing duties. Minimum Qualifications Education : A Bachelor’s degree in electrical engineering or a closely related field from an accredited college or university. Experience : Three (3) years of (full-time equivalent) verifiable professional electrical engineering experience. Registration as a professional electrical engineer. Other Requirements : Must possess a valid California driver’s license and have a satisfactory driving record. Must be physically able to conduct field inspections and testing as assigned. Knowledge and Skills Knowledge of : Operations, services and activities of a comprehensive electrical engineering program. Principles and practices of electrical engineering design and construction. Principles and practices of electrical equipment and materials. Principles and practices of project scheduling and management. Principles and practices of engineering cost estimating. Methods and techniques of field measuring and testing. Methods and techniques of conducting construction site inspection and investigation. Electrical systems and facilities. Advanced mathematical principles. Principles and practices of contract administration and management. Current office procedures, methods, and equipment including computers. Specialized computer programs or systems utilized in electrical engineering design and constructionincluding CADD. Principles of lead supervision and training. Related building codes, regulations and provisions. Related Federal, State and local laws, codes and regulations. Related IEE, ANSI, NFPA, IESNA and other codes/design guidelines Skill/Ability in : Developing, reviewing, and modifying complex electrical engineering plans, designs, and specifications. Leading, organizing and reviewing the work of lower level engineering staff. Interpreting and explaining District policies and procedures. Preparing clear and concise reports. Managing and administering electrical engineering contracts. Analyzing complex electrical engineering problems, evaluating alternatives, and recommending solutions. Performing field inspections and taking measurements. Developing engineering project work scopes, criteria, budgets and schedules. Understanding and following oral and written instructions. Interpreting and preparing revisions to engineering plans, drawings, and specifications. Communicating clearly and concisely, both orally and in writing. Establishing and maintaining effective working relationships with those contacted in the course of work. Equal Employment Opportunity GroupBox1 The San Francisco Bay Area Rapid Transit District is an equal opportunity employer. Applicants shall not be discriminated against because of race, color, sex, sexual orientation, gender identity, gender expression, age (40 and above), religion, national origin (including language use restrictions), disability (mental and physical, including HIV and AIDS), ancestry, marital status, military status, veteran status, medical condition (cancer/genetic characteristics and information), or any protected category prohibited by local, state or federal laws. The BART Human Resources Department will make reasonable efforts in the examination process to accommodate persons with disabilities or for religious reasons. Please advise the Human Resources Department of any special needs in advance of the examination by emailing at least 5 days before your examination date at employment@bart.gov . Qualified veterans may be eligible to obtain additional veteran's credit in the selection process for this recruitment (effective Jan. 1, 2013). To obtain the credit, veterans must attach to the application a DD214 discharge document or proof of disability and complete/submit the Veteran's Preference Application no later than the closing date of the posting. For more information about this credit please go to the Veteran's Preference Policy and Application link at www.bart.gov/jobs . The San Francisco Bay Area Rapid Transit District (BART) prides itself in offering best in class benefits packages to employees of the District. Currently, the following benefits may be available to employees in this job classification. Highlights Medical Coverage (or $350/month if opted out) Dental Coverage Vision Insurance (Basic and Enhanced Plans Available) Retirement Plan through the CA Public Employees’ Retirement System (CalPERS) 2% @ 55 (Classic Members) 2% @ 62 (PEPRA Members) 3% at 50 (Safety Members - Classic) 2.7% @ 57 (Safety Members - PEPRA) Reciprocity available for existing members of many other public retirement systems (see BART website and/or CalPERS website for details) Money Purchase Pension Plan (in-lieu of participating in Social Security tax) 6.65% employer contribution up to annual maximum of $1,868.65 Deferred Compensation & Roth 457 Sick Leave Accruals (12 days per year) Vacation Accruals (3-6 weeks based on time worked w/ the District) Holidays: 9 observed holidays and 5 floating holidays Life Insurance w/ ability to obtain additional coverage Accidental Death and Dismemberment (AD&D) Insurance Survivor Benefits through BART Short-Term Disability Insurance Long-Term Disability Insurance Flexible Spending Accounts: Health and Dependent Care Commuter Benefits Free BART Passes for BART employees and eligible family members. Closing Date/Time: 4/26/2024 11:59 PM Pacific
Apr 03, 2024
Full Time
Marketing Statement Ride BART to a satisfying career that lets you both: 1) make a difference to Bay Area residents, and 2) enjoy excellent pay, benefits, and employment stability. BART is looking for people who like to be challenged, work in a fast-paced environment, and have a passion for connecting riders to work, school and other places they need to go. BART offers a competitive salary, comprehensive health benefits, paid time off, and the CalPERS retirement program. Job Summary Pay Rate Non-Represented Pay Band E07 Annual Salary: $113,621.00 - $172,136.00 Note: The negotiable salary offer will be between $121,574.00/annually - $154,891.87/ annually (commensurate with experience and education) Note This job announcement will be used to establish a list of eligible candidates for vacancies that may occur within the next six (6) months. Reports To Manager of Traction Power Engineering Current Assignment This posting covers Senior Electrical Engineers within the Electrical and Traction Power Engineering Divisions of Office of Infrastructure Delivery (OID) Department at the Bay Area Rapid Transit District (BART). Senior Electrical Engineers have significant technical expertise, oversee projects, and are role models for more junior staff. The scope of the Electrical and Traction Power Engineering Divisions includes the development and modification of BART’s facilities and systems such as: Electrical Division (Lower Voltage - 4 KVAC and below) Responsible for complete electrical design and calculations for assets including: facility electrical power; cathodic protection; fire alarm systems; emergency lighting; power distribution, conversion, control, and storage systems; lighting; battery uninterruptible power supplies (UPS) and backup generators. Traction Power Division (Higher Voltage - 1KV DC, 35 KV AC and above) Responsible for complete electrical design and calculations for assets including: substations, switchgear, rectifiers, traction power distribution, utility power, protective relays and PLCs, grounding, transformers, and power & control cables. Education and experience preferred in the Electrical branch of Engineering. Desirable skills, capabilities, and experience are described, as follows: Beyond the minimum qualifications , The ideal Senior Electrical Engineers must have experience demonstrating Electrical Engineering skills with a minimum of 3 years of full time variable professional electrical engineering work experience in the field and office; prepare equipment specifications and procurement contracts; be familiar with current code requirements, and industry practices. Assignments include exercising lead supervision over BART and/or contracted staff, leading project teams, and coordinating with other engineering disciplines to ensure high quality designs. Senior Electrical Engineers provide leadership in multi-discipline project teams; are responsible for design integration, QA/QC, and coordinating the development of project scopes, schedules, and cost estimates. Candidates with a P.E. in a state other than California may be considered if a California P.E. is achieved within 6 months of hire date. Ideal incumbents will demonstrate the following skills beyond the minimum qualifications: Strong Electrical Engineering skills and experience. Excellent problem-solving ability. Excellent communication skills, including the ability to make clear presentations, produce concise technical reports, and explain complex/technical issues to BART management and leaders. Ability to work with multidisciplinary teams. Ability to handle such diverse aspects of the work as project scoping, planning, budgeting, requirements analysis, conceptual engineering, detailed design, implementation planning, installation coordination, performance measurement, and analysis. Understanding of Critical path method scheduling. Understanding of the different approaches to electrical equipment maintenance. Willingness to be on call 24 hours a day, 7 days at a time (in rotation with others), to work occasionally during overnight and weekend maintenance windows, and to work occasionally in noisy and dirty environments or in foul weather and in close proximity to moving trains. An understanding of electrical, mechanical, physical, and mathematical principles applicable to the BART train control, traction power, ventilation, HVAC, and other miscellaneous support systems and a keen interest in keeping up to date with emerging technology, developments, and trends in these areas. Examples of Duties Performs complex and advanced electrical engineering project duties in the preparation of engineering design plans and specifications for the District's electrical facilities and systems, including traction and utility power, corrosion protection, lighting and other equipment and systems. Performs engineering design duties; prepares engineering design drawings and specifications, calculations and cost estimates, provides design support during construction. Inspects equipment or facility; analyzes and makes recommendations on engineering solutions for repair, modification or maintenance. Prepares and coordinates the preparation of construction feasibility studies and cost estimates; defines scope and develops conceptual plans; prepares electrical engineering design project proposals for management review and approval. Provides assistance in obtaining outside consultant services; schedules consultant proposal submissions, participates in evaluation of consultant proposals. Coordinates engineering work with that of other engineering divisions and public agencies; administers control of required documentation for electrical engineering projects. As assigned, may participate in the selection of engineering staff; provides engineering guidance to lower level staff in their areas of work including electrical engineering design, methods, procedures and techniques. Initiates and evaluates design and field engineering changes during construction; takes field measurements of completed work; inspects construction at substantial and final completion stages; reviews, stamps, and signs design drawings as Engineer of record for construction contracts. Prepares engineering reports, manuals and other correspondence related to work activities. Participates in the preparation and administration of the electrical engineering program budget; submits budget recommendations; monitors expenditures. Recommends approval of and submits contractor's progress payment applications; maintains documentation of contract deficiencies. Attends and participates in professional group meetings; stays abreast of new trends and innovations in the field of electrical engineering. As assigned, conducts field inspections, site investigations and field materials testing duties. Minimum Qualifications Education : A Bachelor’s degree in electrical engineering or a closely related field from an accredited college or university. Experience : Three (3) years of (full-time equivalent) verifiable professional electrical engineering experience. Registration as a professional electrical engineer. Other Requirements : Must possess a valid California driver’s license and have a satisfactory driving record. Must be physically able to conduct field inspections and testing as assigned. Knowledge and Skills Knowledge of : Operations, services and activities of a comprehensive electrical engineering program. Principles and practices of electrical engineering design and construction. Principles and practices of electrical equipment and materials. Principles and practices of project scheduling and management. Principles and practices of engineering cost estimating. Methods and techniques of field measuring and testing. Methods and techniques of conducting construction site inspection and investigation. Electrical systems and facilities. Advanced mathematical principles. Principles and practices of contract administration and management. Current office procedures, methods, and equipment including computers. Specialized computer programs or systems utilized in electrical engineering design and constructionincluding CADD. Principles of lead supervision and training. Related building codes, regulations and provisions. Related Federal, State and local laws, codes and regulations. Related IEE, ANSI, NFPA, IESNA and other codes/design guidelines Skill/Ability in : Developing, reviewing, and modifying complex electrical engineering plans, designs, and specifications. Leading, organizing and reviewing the work of lower level engineering staff. Interpreting and explaining District policies and procedures. Preparing clear and concise reports. Managing and administering electrical engineering contracts. Analyzing complex electrical engineering problems, evaluating alternatives, and recommending solutions. Performing field inspections and taking measurements. Developing engineering project work scopes, criteria, budgets and schedules. Understanding and following oral and written instructions. Interpreting and preparing revisions to engineering plans, drawings, and specifications. Communicating clearly and concisely, both orally and in writing. Establishing and maintaining effective working relationships with those contacted in the course of work. Equal Employment Opportunity GroupBox1 The San Francisco Bay Area Rapid Transit District is an equal opportunity employer. Applicants shall not be discriminated against because of race, color, sex, sexual orientation, gender identity, gender expression, age (40 and above), religion, national origin (including language use restrictions), disability (mental and physical, including HIV and AIDS), ancestry, marital status, military status, veteran status, medical condition (cancer/genetic characteristics and information), or any protected category prohibited by local, state or federal laws. The BART Human Resources Department will make reasonable efforts in the examination process to accommodate persons with disabilities or for religious reasons. Please advise the Human Resources Department of any special needs in advance of the examination by emailing at least 5 days before your examination date at employment@bart.gov . Qualified veterans may be eligible to obtain additional veteran's credit in the selection process for this recruitment (effective Jan. 1, 2013). To obtain the credit, veterans must attach to the application a DD214 discharge document or proof of disability and complete/submit the Veteran's Preference Application no later than the closing date of the posting. For more information about this credit please go to the Veteran's Preference Policy and Application link at www.bart.gov/jobs . The San Francisco Bay Area Rapid Transit District (BART) prides itself in offering best in class benefits packages to employees of the District. Currently, the following benefits may be available to employees in this job classification. Highlights Medical Coverage (or $350/month if opted out) Dental Coverage Vision Insurance (Basic and Enhanced Plans Available) Retirement Plan through the CA Public Employees’ Retirement System (CalPERS) 2% @ 55 (Classic Members) 2% @ 62 (PEPRA Members) 3% at 50 (Safety Members - Classic) 2.7% @ 57 (Safety Members - PEPRA) Reciprocity available for existing members of many other public retirement systems (see BART website and/or CalPERS website for details) Money Purchase Pension Plan (in-lieu of participating in Social Security tax) 6.65% employer contribution up to annual maximum of $1,868.65 Deferred Compensation & Roth 457 Sick Leave Accruals (12 days per year) Vacation Accruals (3-6 weeks based on time worked w/ the District) Holidays: 9 observed holidays and 5 floating holidays Life Insurance w/ ability to obtain additional coverage Accidental Death and Dismemberment (AD&D) Insurance Survivor Benefits through BART Short-Term Disability Insurance Long-Term Disability Insurance Flexible Spending Accounts: Health and Dependent Care Commuter Benefits Free BART Passes for BART employees and eligible family members. Closing Date/Time: 4/26/2024 11:59 PM Pacific
CITY OF MINNEAPOLIS
Minneapolis, Minnesota, United States
Position Description The Minneapolis Convention Center (MCC) is a relationship building. Each individual at MCC is a hospitality hero who fulfills our mission by providing service and fostering relationships. We make a positive impact on our internal and external guests by collaborating and delivering excellence in our service and facility. We host more than 300 events annually and contribute to a vibrant downtown community by providing economic impact through visitor spending at hotels, restaurants, arts & attractions, and retail establishments. The Operating Maintenance Engineer is responsible for the operation, maintenance and performance of technical work on physical plant facilities, including electro-magnetic controls, pneumatic systems, HVAC systems, overhead doors, water coolers, refrigeration, plumbing, life safety and security equipment at the Minneapolis Convention Center. Upholding high standards of customer service, independent judgment, and professionalism are required for this position. Work Location: This position currently works on-site only. The City of Minneapolis does not sponsor applicants for work visas. Salary: Anticipated salary for this position is $34.40/ hour, depending on qualifications. Job Duties and Responsibilities • Operate and perform preventive maintenance on mechanical equipment. • Read blueprints, electrical and related diagrams, to help locate problems. • Troubleshoot, maintain, and repair electromagnetic controls, pneumatic systems, HVAC systems, overhead doors, grill gates, and water coolers. • May perform brazing, soldering, gas/or arc welding cutting, swaging, and flaring. • May change, modify, or replace pumps, motors, valves, dampers, pipes, condensers, heat exchangers, and make proper alignment adjustments. • Replace belts, and align fan motors to sheaves and shafts. • Insulate piping and other heat exchange surfaces. • Clean mechanical spaces, supply air diffusers, deflectors, fan intake, screens, dampers, heat exchangers, and air and water refrigeration condensers. • Make estimates and keep records of all time and materials and order materials and submit reports. • Caulk building interior and exterior as required. • Grease and oil machinery, service cable winches, and pump and clean sump pump pits. • Read and complete event program assignments, including operating environmental control systems, filling and emptying tubs and pools of water, and setting and connecting portable sinks. • Conduct building tours to inspect facility and equipment and make reports of findings. • Layout and install cabling for sensors and controls. Working Conditions: Indoor and outdoor work with exposure to chemicals, dirt, dust, heat, etc. Required Qualifications Minimum Qualifications: High school diploma or equivalent. Minimum Experience: Two years of experience in building operations maintenance with experience with large systems. Licenses/Certifications: Must have, and maintain as current, a Class 2-C or higher MN Boiler Engineer License. Valid Drivers license. NOTE: You must submit a copy of your boilers license with your official application to be considered. Without it, your application will be deemed as incomplete Equivalency: An equivalent combination of education and experience closely related to the duties of the position MAY be considered. Selection Process: The selection process will consist of the following steps: a rating of relevant education and experience (100%) . It is important that your application show all the relevant education and experience you possess. This information will be used to determine which candidates will proceed in the selection process. A submitted application is also used to verify the answers to any supplemental questions. Only those candidates who attain a passing score (70%) on each step in the selection process will be placed on the eligible list. The City of Minneapolis Human Resources Department reserves the right to limit the number in any phase of the selection process. Background Check: The City has determined that a criminal background check and/or qualifications check may be necessary for certain positions with this job title. Applicants may be required to sign an informed consent form allowing the City to obtain their criminal history and/or verify their qualifications in connection with the position sought. Applicants who do not sign the informed consent form will not be further considered for the position. Drug / Alcohol Testing and Medical Examination: All job applicants must pass a pre-employment drug and alcohol test and medical exam once a conditional offer of employment has been made. Applicants will be required to sign a notification and consent form prior to undergoing drug and alcohol testing. Applicants who do not consent to undergo drug and alcohol testing will not be required to do so and the City will withdraw the conditional job offer, resulting in the job applicant no longer being considered for the position. Union Representation: This position is represented by a collective bargaining agreement between the City of Minneapolis and the [ International Union of Operating Engineers Local Union NO. 70 AFL-CIO (CSE) ] . For more information on the terms and conditions of this agreement please visit the link above. Knowledge, Skills and Abilities • Vocational training in HVAC, or mechanical system repair and maintenance preferred. • Considerable knowledge of heating and air conditioning systems. • Demonstrable knowledge of computerized - building automation, preventive maintenance, and work order systems. • Good knowledge of the tools, methods, and equipment used in mechanical operation and maintenance for a large public facility • Knowledge of and ability to perform welding, soldering, brazing as required. • Knowledge of dangers of mercury lighting and refrigerants and knowledge of proper and safe disposal. • Ability to read blue prints and schematics of equipment to assist in operation, maintenance and repair work. • Ability to troubleshoot problems with building equipment and perform maintenance and upkeep. Benefits Summary Our employees enjoy competitive salaries and generous benefits. We pride ourselves on a comprehensive benefits program that supports employees' health and financial well-being. Programs, resources, and benefit eligibility varies based on position, average hours worked, location and length of service. For detailed benefits information, pleasevisit the benefits page . New12 weeks of paid parental leave City employees are eligible for up to 12 weeks of paid parental leave in the event of a birth or placement for adoption of a child. Insurance Health insurance Eligibility for benefits begins the first of the month following employment date. The City of Minneapolis offers eligible employees one plan design with a choice of six provider networks, allowing you to select the best option for you. Available plans include Medica Choice Passport, Medica Elect, VantagePlus with Medica, Park Nicollet and HealthPartners Medical Group First with Medica, Ridgeview Community Network powered by Medica, and Clear Value with Medica. Dental insurance The City of Minneapolis offers dental insurance through Delta Dental of Minnesota and pays 100% of the monthly premium for eligible employees. Benefits Paid time off Our generous leave package includes vacation, holidays and paid sick leave, which gives employees the opportunity to enhance their quality of life outside work. Amounts and accrual rates are based on years of experience and collective bargaining agreements . Retirement City employees earn a pension and may choose to participate in additional retirement savings programs. Pension: The City of Minneapolis participates in the Public Employees Retirement Association (PERA). Employees and the City both contribute a percentage of your pay to fund future benefits. Deferred compensation : Employees may choose to participate in pre-tax or after-tax savings plans through the Minnesota State Retirement System (MSRS). Transportation Eligible City employees may choose to participate in the following transportation programs: Metropass: The Metropass program allows eligible employees to enroll in a pass for unlimited bus or light rail rides at a discounted price. Parking or Van Pool: The City of Minneapolis Transportation Benefits Plan gives you options to pay certain commuting costs, such as qualified parking and van pool expenses, with pre-tax dollars. Learning and development To engage and develop employees, the City of Minneapolis offers classes in leadership, cultural agility, change management and more. Additionally, educational discounts at Augsburg University, Hamline University, St. Catherine’s, and St. Mary's University of Minnesota are available to City employees. Other perks Employees can also take advantage of optional life insurance, flexible spending accounts, the Employee Assistance Program , health club discounts and more. Closing Date/Time: Continuous
Apr 09, 2024
Full Time
Position Description The Minneapolis Convention Center (MCC) is a relationship building. Each individual at MCC is a hospitality hero who fulfills our mission by providing service and fostering relationships. We make a positive impact on our internal and external guests by collaborating and delivering excellence in our service and facility. We host more than 300 events annually and contribute to a vibrant downtown community by providing economic impact through visitor spending at hotels, restaurants, arts & attractions, and retail establishments. The Operating Maintenance Engineer is responsible for the operation, maintenance and performance of technical work on physical plant facilities, including electro-magnetic controls, pneumatic systems, HVAC systems, overhead doors, water coolers, refrigeration, plumbing, life safety and security equipment at the Minneapolis Convention Center. Upholding high standards of customer service, independent judgment, and professionalism are required for this position. Work Location: This position currently works on-site only. The City of Minneapolis does not sponsor applicants for work visas. Salary: Anticipated salary for this position is $34.40/ hour, depending on qualifications. Job Duties and Responsibilities • Operate and perform preventive maintenance on mechanical equipment. • Read blueprints, electrical and related diagrams, to help locate problems. • Troubleshoot, maintain, and repair electromagnetic controls, pneumatic systems, HVAC systems, overhead doors, grill gates, and water coolers. • May perform brazing, soldering, gas/or arc welding cutting, swaging, and flaring. • May change, modify, or replace pumps, motors, valves, dampers, pipes, condensers, heat exchangers, and make proper alignment adjustments. • Replace belts, and align fan motors to sheaves and shafts. • Insulate piping and other heat exchange surfaces. • Clean mechanical spaces, supply air diffusers, deflectors, fan intake, screens, dampers, heat exchangers, and air and water refrigeration condensers. • Make estimates and keep records of all time and materials and order materials and submit reports. • Caulk building interior and exterior as required. • Grease and oil machinery, service cable winches, and pump and clean sump pump pits. • Read and complete event program assignments, including operating environmental control systems, filling and emptying tubs and pools of water, and setting and connecting portable sinks. • Conduct building tours to inspect facility and equipment and make reports of findings. • Layout and install cabling for sensors and controls. Working Conditions: Indoor and outdoor work with exposure to chemicals, dirt, dust, heat, etc. Required Qualifications Minimum Qualifications: High school diploma or equivalent. Minimum Experience: Two years of experience in building operations maintenance with experience with large systems. Licenses/Certifications: Must have, and maintain as current, a Class 2-C or higher MN Boiler Engineer License. Valid Drivers license. NOTE: You must submit a copy of your boilers license with your official application to be considered. Without it, your application will be deemed as incomplete Equivalency: An equivalent combination of education and experience closely related to the duties of the position MAY be considered. Selection Process: The selection process will consist of the following steps: a rating of relevant education and experience (100%) . It is important that your application show all the relevant education and experience you possess. This information will be used to determine which candidates will proceed in the selection process. A submitted application is also used to verify the answers to any supplemental questions. Only those candidates who attain a passing score (70%) on each step in the selection process will be placed on the eligible list. The City of Minneapolis Human Resources Department reserves the right to limit the number in any phase of the selection process. Background Check: The City has determined that a criminal background check and/or qualifications check may be necessary for certain positions with this job title. Applicants may be required to sign an informed consent form allowing the City to obtain their criminal history and/or verify their qualifications in connection with the position sought. Applicants who do not sign the informed consent form will not be further considered for the position. Drug / Alcohol Testing and Medical Examination: All job applicants must pass a pre-employment drug and alcohol test and medical exam once a conditional offer of employment has been made. Applicants will be required to sign a notification and consent form prior to undergoing drug and alcohol testing. Applicants who do not consent to undergo drug and alcohol testing will not be required to do so and the City will withdraw the conditional job offer, resulting in the job applicant no longer being considered for the position. Union Representation: This position is represented by a collective bargaining agreement between the City of Minneapolis and the [ International Union of Operating Engineers Local Union NO. 70 AFL-CIO (CSE) ] . For more information on the terms and conditions of this agreement please visit the link above. Knowledge, Skills and Abilities • Vocational training in HVAC, or mechanical system repair and maintenance preferred. • Considerable knowledge of heating and air conditioning systems. • Demonstrable knowledge of computerized - building automation, preventive maintenance, and work order systems. • Good knowledge of the tools, methods, and equipment used in mechanical operation and maintenance for a large public facility • Knowledge of and ability to perform welding, soldering, brazing as required. • Knowledge of dangers of mercury lighting and refrigerants and knowledge of proper and safe disposal. • Ability to read blue prints and schematics of equipment to assist in operation, maintenance and repair work. • Ability to troubleshoot problems with building equipment and perform maintenance and upkeep. Benefits Summary Our employees enjoy competitive salaries and generous benefits. We pride ourselves on a comprehensive benefits program that supports employees' health and financial well-being. Programs, resources, and benefit eligibility varies based on position, average hours worked, location and length of service. For detailed benefits information, pleasevisit the benefits page . New12 weeks of paid parental leave City employees are eligible for up to 12 weeks of paid parental leave in the event of a birth or placement for adoption of a child. Insurance Health insurance Eligibility for benefits begins the first of the month following employment date. The City of Minneapolis offers eligible employees one plan design with a choice of six provider networks, allowing you to select the best option for you. Available plans include Medica Choice Passport, Medica Elect, VantagePlus with Medica, Park Nicollet and HealthPartners Medical Group First with Medica, Ridgeview Community Network powered by Medica, and Clear Value with Medica. Dental insurance The City of Minneapolis offers dental insurance through Delta Dental of Minnesota and pays 100% of the monthly premium for eligible employees. Benefits Paid time off Our generous leave package includes vacation, holidays and paid sick leave, which gives employees the opportunity to enhance their quality of life outside work. Amounts and accrual rates are based on years of experience and collective bargaining agreements . Retirement City employees earn a pension and may choose to participate in additional retirement savings programs. Pension: The City of Minneapolis participates in the Public Employees Retirement Association (PERA). Employees and the City both contribute a percentage of your pay to fund future benefits. Deferred compensation : Employees may choose to participate in pre-tax or after-tax savings plans through the Minnesota State Retirement System (MSRS). Transportation Eligible City employees may choose to participate in the following transportation programs: Metropass: The Metropass program allows eligible employees to enroll in a pass for unlimited bus or light rail rides at a discounted price. Parking or Van Pool: The City of Minneapolis Transportation Benefits Plan gives you options to pay certain commuting costs, such as qualified parking and van pool expenses, with pre-tax dollars. Learning and development To engage and develop employees, the City of Minneapolis offers classes in leadership, cultural agility, change management and more. Additionally, educational discounts at Augsburg University, Hamline University, St. Catherine’s, and St. Mary's University of Minnesota are available to City employees. Other perks Employees can also take advantage of optional life insurance, flexible spending accounts, the Employee Assistance Program , health club discounts and more. Closing Date/Time: Continuous
Marketing Statement Ride BART to a satisfying career that lets you both: 1) make a difference to Bay Area residents, and 2) enjoy excellent pay, benefits, and employment stability. BART is looking for people who like to be challenged, work in a fast-paced environment, and have a passion for connecting riders to work, school and other places they need to go. BART offers a competitive salary, comprehensive health benefits, paid time off, and the CalPERS retirement program. Job Summary Pay Rate Non-Represented Pay Band E07 Annual Salary: $113,621.00 - $172,136.00 Note: The negotiable salary offer will be between $121,574.00/annually - $154,891.87/ annually (commensurate with experience and education) Note This job announcement will be used to establish a list of eligible candidates for vacancies that may occur within the next six (6) months. Reports To Manager of Electrical Engineering Current Assignment This posting covers the Senior Engineer within the Electrical and Traction Power Engineering Divisions of Office of Infrastructure Delivery (OID) Department at the Bay Area Rapid Transit District (BART). Senior Engineers have significant technical expertise, oversee projects, and are role models for more junior staff. The scope of the Electrical and Traction Power Engineering Divisions includes the development and modification of BART’s facilities and systems such as: Electrical Division (Lower Voltage - 4 KVAC and below) Responsible for complete electrical design and calculations for assets including: facility electrical power; cathodic protection; fire alarm systems; emergency lighting; power distribution, conversion, control, and storage systems; lighting; battery uninterruptible power supplies (UPS) and backup generators. Traction Power Division (Higher Voltage - 1KV DC, 35 KV AC and above) Responsible for complete electrical design and calculations for assets including: substations, switchgear, rectifiers, traction power distribution, utility power, protective relays and PLCs, grounding, transformers, and power & control cables. Education and experience preferred in the Electrical branch of Engineering. Desirable skills, capabilities, and experience are described, as follows: Beyond the minimum qualifications , The ideal Senior Engineers must have experience demonstrating Electrical Engineering skills with a minimum of 3 years of full time variable professional electrical engineering work experience in the field and office; prepare equipment specifications and procurement contracts; be familiar with current code requirements, and industry practices. Assignments include exercising lead supervision over BART and/or contracted staff, leading project teams, and coordinating with other engineering disciplines to ensure high quality designs. Senior Engineers provide leadership in multi-discipline project teams; are responsible for design integration, QA/QC, and coordinating the development of project scopes, schedules, and cost estimates. Ideal incumbents will demonstrate the following skills beyond the minimum qualifications: Strong Electrical Engineering skills and experience. Excellent problem-solving ability. Excellent communication skills, including the ability to make clear presentations, produce concise technical reports, and explain complex/technical issues to BART management and leaders. Ability to work with multidisciplinary teams. Ability to handle such diverse aspects of the work as project scoping, planning, budgeting, requirements analysis, conceptual engineering, detailed design, implementation planning, installation coordination, performance measurement, and analysis. Understanding of Critical path method scheduling. Understanding of the different approaches to electrical equipment maintenance. Willingness to be on call 24 hours a day, 7 days at a time (in rotation with others), to work occasionally during overnight and weekend maintenance windows, and to work occasionally in noisy and dirty environments or in foul weather and in close proximity to moving trains. An understanding of electrical, mechanical, physical, and mathematical principles applicable to the BART train control, traction power, ventilation, HVAC, and other miscellaneous support systems and a keen interest in keeping up to date with emerging technology, developments, and trends in these areas. Examples of Duties Performs complex engineering design or construction project duties; as assigned, may serve as Resident Engineer on construction projects; may direct contract resident engineers on assigned project. Establishes schedules and methods for providing contract administration services; inspects and verifies quantities of materials, and monitors adherence to specifications; identifies resources needed. Monitors progress of engineering design or construction projects; makes recommendations on resources to be allocated. Assists in the development of policies and procedures; monitors work activities to ensure compliance with established policies and procedures; makes recommendations for changes and improvements to existing standards and procedures. Recommends and assists in the implementation of goals and objectives; implements approved policies and procedures. Recommends approval of and submits contractor's progress payment applications; maintains documentation of contract deficiencies. Prepares engineering designs, specifications, costs and quantity estimates for engineering projects; reviews the adequacy and accuracy of computations. Administers control of required documentation for contracts; prepares a variety of reports and correspondence on engineering design or construction matters including Inspector's Daily Reports, monthly and final completion reports, contract modifications and negotiations, field and design engineering changes, and correspondence with the contractor on contractual obligations. Initiates and evaluates design and field engineering changes during construction; makes field measurements of completed items of work; inspects construction at substantial and final completion states. As assigned, participates in the selection of engineering staff; provides or coordinates staff training; works with employees to correct deficiencies; implements discipline procedures. Participates in the preparation and administration of the program budget; submits budget recommendations; monitors expenditures. Prepares analytical and statistical reports on operations and activities. Attends and participates in professional group meetings; stays abreast of new trends and innovations in the field of engineering design and construction. Minimum Qualifications Education : Possession of a Bachelor’s degree in engineering or a closely related field from an accredited college of university. Experience : Three (3) years of (full-time equivalent) verifiable experience in engineering project administration. Other Requirements : Must possess a valid California driver’s license and have a satisfactory driving record. Substitution: Additional professional experience as outlined above may be substituted for the education on a year-for year basis. A college degree is preferred. Knowledge and Skills Knowledge of : Principles and practices of engineering discipline in assigned area Operations, services and activities of an engineering design and construction program Principles and practices of project scheduling and oversight Principles, practices, methods and techniques of contract management Methods and techniques of field measuring and testing Principles and practices of engineering cost estimating Terminology, methods, practices and techniques used in technical engineering report preparation Advanced mathematical principles Construction contract administration and management Principles of lead supervision and training Current office procedures, methods, and equipment including computers Specialized computer programs or systems utilized in construction engineering project design including CADD Materials and equipment used in construction engineering projects Related building codes, regulations and provisions Related Federal, State and local laws, codes and regulations Skill/Ability in : Developing, reviewing, and modifying complex engineering plans, designs, and specifications Leading, organizing and reviewing the work of lower level staff Interpreting and explaining District policies and procedures Preparing clear and concise reports Overseeing and administering contracts Overseeing assigned engineering construction projects Analyzing engineering problems, evaluating alternatives, and recommending solutions Interpreting and preparing revisions to engineering plans, drawings, and specifications Conducting and overseeing field inspections, measurements, and testing Communicating clearly and concisely, both orally and in writing Establishing and maintaining effective working relationships with those contacted in the course of the work Equal Employment Opportunity GroupBox1 The San Francisco Bay Area Rapid Transit District is an equal opportunity employer. Applicants shall not be discriminated against because of race, color, sex, sexual orientation, gender identity, gender expression, age (40 and above), religion, national origin (including language use restrictions), disability (mental and physical, including HIV and AIDS), ancestry, marital status, military status, veteran status, medical condition (cancer/genetic characteristics and information), or any protected category prohibited by local, state or federal laws. The BART Human Resources Department will make reasonable efforts in the examination process to accommodate persons with disabilities or for religious reasons. Please advise the Human Resources Department of any special needs in advance of the examination by emailing at least 5 days before your examination date at employment@bart.gov . Qualified veterans may be eligible to obtain additional veteran's credit in the selection process for this recruitment (effective Jan. 1, 2013). To obtain the credit, veterans must attach to the application a DD214 discharge document or proof of disability and complete/submit the Veteran's Preference Application no later than the closing date of the posting. For more information about this credit please go to the Veteran's Preference Policy and Application link at www.bart.gov/jobs . The San Francisco Bay Area Rapid Transit District (BART) prides itself in offering best in class benefits packages to employees of the District. Currently, the following benefits may be available to employees in this job classification. Highlights Medical Coverage (or $350/month if opted out) Dental Coverage Vision Insurance (Basic and Enhanced Plans Available) Retirement Plan through the CA Public Employees’ Retirement System (CalPERS) 2% @ 55 (Classic Members) 2% @ 62 (PEPRA Members) 3% at 50 (Safety Members - Classic) 2.7% @ 57 (Safety Members - PEPRA) Reciprocity available for existing members of many other public retirement systems (see BART website and/or CalPERS website for details) Money Purchase Pension Plan (in-lieu of participating in Social Security tax) 6.65% employer contribution up to annual maximum of $1,868.65 Deferred Compensation & Roth 457 Sick Leave Accruals (12 days per year) Vacation Accruals (3-6 weeks based on time worked w/ the District) Holidays: 9 observed holidays and 5 floating holidays Life Insurance w/ ability to obtain additional coverage Accidental Death and Dismemberment (AD&D) Insurance Survivor Benefits through BART Short-Term Disability Insurance Long-Term Disability Insurance Flexible Spending Accounts: Health and Dependent Care Commuter Benefits Free BART Passes for BART employees and eligible family members. Closing Date/Time: 4/26/2024 11:59 PM Pacific
Apr 03, 2024
Full Time
Marketing Statement Ride BART to a satisfying career that lets you both: 1) make a difference to Bay Area residents, and 2) enjoy excellent pay, benefits, and employment stability. BART is looking for people who like to be challenged, work in a fast-paced environment, and have a passion for connecting riders to work, school and other places they need to go. BART offers a competitive salary, comprehensive health benefits, paid time off, and the CalPERS retirement program. Job Summary Pay Rate Non-Represented Pay Band E07 Annual Salary: $113,621.00 - $172,136.00 Note: The negotiable salary offer will be between $121,574.00/annually - $154,891.87/ annually (commensurate with experience and education) Note This job announcement will be used to establish a list of eligible candidates for vacancies that may occur within the next six (6) months. Reports To Manager of Electrical Engineering Current Assignment This posting covers the Senior Engineer within the Electrical and Traction Power Engineering Divisions of Office of Infrastructure Delivery (OID) Department at the Bay Area Rapid Transit District (BART). Senior Engineers have significant technical expertise, oversee projects, and are role models for more junior staff. The scope of the Electrical and Traction Power Engineering Divisions includes the development and modification of BART’s facilities and systems such as: Electrical Division (Lower Voltage - 4 KVAC and below) Responsible for complete electrical design and calculations for assets including: facility electrical power; cathodic protection; fire alarm systems; emergency lighting; power distribution, conversion, control, and storage systems; lighting; battery uninterruptible power supplies (UPS) and backup generators. Traction Power Division (Higher Voltage - 1KV DC, 35 KV AC and above) Responsible for complete electrical design and calculations for assets including: substations, switchgear, rectifiers, traction power distribution, utility power, protective relays and PLCs, grounding, transformers, and power & control cables. Education and experience preferred in the Electrical branch of Engineering. Desirable skills, capabilities, and experience are described, as follows: Beyond the minimum qualifications , The ideal Senior Engineers must have experience demonstrating Electrical Engineering skills with a minimum of 3 years of full time variable professional electrical engineering work experience in the field and office; prepare equipment specifications and procurement contracts; be familiar with current code requirements, and industry practices. Assignments include exercising lead supervision over BART and/or contracted staff, leading project teams, and coordinating with other engineering disciplines to ensure high quality designs. Senior Engineers provide leadership in multi-discipline project teams; are responsible for design integration, QA/QC, and coordinating the development of project scopes, schedules, and cost estimates. Ideal incumbents will demonstrate the following skills beyond the minimum qualifications: Strong Electrical Engineering skills and experience. Excellent problem-solving ability. Excellent communication skills, including the ability to make clear presentations, produce concise technical reports, and explain complex/technical issues to BART management and leaders. Ability to work with multidisciplinary teams. Ability to handle such diverse aspects of the work as project scoping, planning, budgeting, requirements analysis, conceptual engineering, detailed design, implementation planning, installation coordination, performance measurement, and analysis. Understanding of Critical path method scheduling. Understanding of the different approaches to electrical equipment maintenance. Willingness to be on call 24 hours a day, 7 days at a time (in rotation with others), to work occasionally during overnight and weekend maintenance windows, and to work occasionally in noisy and dirty environments or in foul weather and in close proximity to moving trains. An understanding of electrical, mechanical, physical, and mathematical principles applicable to the BART train control, traction power, ventilation, HVAC, and other miscellaneous support systems and a keen interest in keeping up to date with emerging technology, developments, and trends in these areas. Examples of Duties Performs complex engineering design or construction project duties; as assigned, may serve as Resident Engineer on construction projects; may direct contract resident engineers on assigned project. Establishes schedules and methods for providing contract administration services; inspects and verifies quantities of materials, and monitors adherence to specifications; identifies resources needed. Monitors progress of engineering design or construction projects; makes recommendations on resources to be allocated. Assists in the development of policies and procedures; monitors work activities to ensure compliance with established policies and procedures; makes recommendations for changes and improvements to existing standards and procedures. Recommends and assists in the implementation of goals and objectives; implements approved policies and procedures. Recommends approval of and submits contractor's progress payment applications; maintains documentation of contract deficiencies. Prepares engineering designs, specifications, costs and quantity estimates for engineering projects; reviews the adequacy and accuracy of computations. Administers control of required documentation for contracts; prepares a variety of reports and correspondence on engineering design or construction matters including Inspector's Daily Reports, monthly and final completion reports, contract modifications and negotiations, field and design engineering changes, and correspondence with the contractor on contractual obligations. Initiates and evaluates design and field engineering changes during construction; makes field measurements of completed items of work; inspects construction at substantial and final completion states. As assigned, participates in the selection of engineering staff; provides or coordinates staff training; works with employees to correct deficiencies; implements discipline procedures. Participates in the preparation and administration of the program budget; submits budget recommendations; monitors expenditures. Prepares analytical and statistical reports on operations and activities. Attends and participates in professional group meetings; stays abreast of new trends and innovations in the field of engineering design and construction. Minimum Qualifications Education : Possession of a Bachelor’s degree in engineering or a closely related field from an accredited college of university. Experience : Three (3) years of (full-time equivalent) verifiable experience in engineering project administration. Other Requirements : Must possess a valid California driver’s license and have a satisfactory driving record. Substitution: Additional professional experience as outlined above may be substituted for the education on a year-for year basis. A college degree is preferred. Knowledge and Skills Knowledge of : Principles and practices of engineering discipline in assigned area Operations, services and activities of an engineering design and construction program Principles and practices of project scheduling and oversight Principles, practices, methods and techniques of contract management Methods and techniques of field measuring and testing Principles and practices of engineering cost estimating Terminology, methods, practices and techniques used in technical engineering report preparation Advanced mathematical principles Construction contract administration and management Principles of lead supervision and training Current office procedures, methods, and equipment including computers Specialized computer programs or systems utilized in construction engineering project design including CADD Materials and equipment used in construction engineering projects Related building codes, regulations and provisions Related Federal, State and local laws, codes and regulations Skill/Ability in : Developing, reviewing, and modifying complex engineering plans, designs, and specifications Leading, organizing and reviewing the work of lower level staff Interpreting and explaining District policies and procedures Preparing clear and concise reports Overseeing and administering contracts Overseeing assigned engineering construction projects Analyzing engineering problems, evaluating alternatives, and recommending solutions Interpreting and preparing revisions to engineering plans, drawings, and specifications Conducting and overseeing field inspections, measurements, and testing Communicating clearly and concisely, both orally and in writing Establishing and maintaining effective working relationships with those contacted in the course of the work Equal Employment Opportunity GroupBox1 The San Francisco Bay Area Rapid Transit District is an equal opportunity employer. Applicants shall not be discriminated against because of race, color, sex, sexual orientation, gender identity, gender expression, age (40 and above), religion, national origin (including language use restrictions), disability (mental and physical, including HIV and AIDS), ancestry, marital status, military status, veteran status, medical condition (cancer/genetic characteristics and information), or any protected category prohibited by local, state or federal laws. The BART Human Resources Department will make reasonable efforts in the examination process to accommodate persons with disabilities or for religious reasons. Please advise the Human Resources Department of any special needs in advance of the examination by emailing at least 5 days before your examination date at employment@bart.gov . Qualified veterans may be eligible to obtain additional veteran's credit in the selection process for this recruitment (effective Jan. 1, 2013). To obtain the credit, veterans must attach to the application a DD214 discharge document or proof of disability and complete/submit the Veteran's Preference Application no later than the closing date of the posting. For more information about this credit please go to the Veteran's Preference Policy and Application link at www.bart.gov/jobs . The San Francisco Bay Area Rapid Transit District (BART) prides itself in offering best in class benefits packages to employees of the District. Currently, the following benefits may be available to employees in this job classification. Highlights Medical Coverage (or $350/month if opted out) Dental Coverage Vision Insurance (Basic and Enhanced Plans Available) Retirement Plan through the CA Public Employees’ Retirement System (CalPERS) 2% @ 55 (Classic Members) 2% @ 62 (PEPRA Members) 3% at 50 (Safety Members - Classic) 2.7% @ 57 (Safety Members - PEPRA) Reciprocity available for existing members of many other public retirement systems (see BART website and/or CalPERS website for details) Money Purchase Pension Plan (in-lieu of participating in Social Security tax) 6.65% employer contribution up to annual maximum of $1,868.65 Deferred Compensation & Roth 457 Sick Leave Accruals (12 days per year) Vacation Accruals (3-6 weeks based on time worked w/ the District) Holidays: 9 observed holidays and 5 floating holidays Life Insurance w/ ability to obtain additional coverage Accidental Death and Dismemberment (AD&D) Insurance Survivor Benefits through BART Short-Term Disability Insurance Long-Term Disability Insurance Flexible Spending Accounts: Health and Dependent Care Commuter Benefits Free BART Passes for BART employees and eligible family members. Closing Date/Time: 4/26/2024 11:59 PM Pacific
Irvine Ranch Water District, CA
Irvine, California, United States
General Description We are excited to announce that we are accepting applications for the position of Senior Engineer (Electrical). This position will remain open until filled. The District Irvine Ranch Water District (IRWD) is a progressive, values-driven agency, with an international reputation for its leading-edge financial management practices, water recycling program, water use efficiency practices, water banking, urban runoff treatment, and energy generation and storage. Established in 1961 as a California Water District under the provisions of the California Water Code, IRWD is an independent special district serving central Orange County. IRWD provides high-quality drinking water, reliable sewage collection and treatment, ground-breaking recycled water programs, and environmentally sound urban runoff treatment to its customers. As an independent, not-for-profit public agency, IRWD is governed by a publicly elected five-member Board of Directors. The Board is responsible for the District's policies and decision-making. Day-to-day operations are supervised by the General Manager. Additional information can be found at the District's website: www.IRWD.com . The Position The Senior Engineer (Electrical): Independently plans and oversees the planning, design, plan preparation, specifications, and cost estimates for water, sewage and recycled water systems engineering work, emphasizing design, construction, and operations; Coordinates various planning efforts and serves as project manager on complex and difficult design and construction projects related to capital improvement projects; Makes decisions on engineering issues; Supervises the work of engineering personnel. The ideal candidate for the Senior Engineer (Electrical) position will have the ability to manage multiple design and construction projects. They will be able to communicate the assignment of work and ensure clarity of roles and responsibilities to various consultants, contractors, and staff to ensure completion of project assignments and meet deadlines. The ideal candidate will be thorough when providing technical support and will be able to detect and address errors in the supervision of acceptance testing of electrical, instrumentation and control system components. They will be able to identify key stakeholders needed for the success of a project or process. Lastly, the ideal candidate will be able to prepare designs, plans, specifications, cost estimates, and reports that are clear and focused on what is expected or needs to be accomplished for the implementation of electrical and instrumentation improvements. Summary of Duties Act as Project Manager for large complex planning, design, and construction projects. Prepare and review designs submitted by consultants, developers, and other entities for compliance with standards. Prepare and review specifications and cost estimates. Review shop drawings and other construction submittals for compliance with the approved plans and specifications. Prepare progress estimates and recommend change orders/variances. Provide technical support of water, sewer, and recycled water system operational requirements. Maintain a variety of records and prepare correspondence and reports in a professional manner complying with District standards. Prepare agenda items and supporting material for Committee and Board action. Prepare Requests for Proposals for retaining consultants on engineering and planning projects. Coordinate projects and maintain good relationships with representatives from other water agencies, city, county, regulatory agencies, and landowners. Review work, give instruction, and evaluate performance of assigned personnel on a periodic basis. May supervise lower level staff. May participate in the selection, counseling, and training of employees. Assume the duties of the Engineering Manager as required. Operate personal computers including word processing, spreadsheet, presentation, scheduling, email, internet, and database software. Comply with District safety work-related practices and attend relevant safety training. Responsible for all other work-related duties. When assigned to Electrical: Plan, schedule, assign, monitor, and evaluate the work of technical staff and consultants engaged in preparing designs, plans, specifications, cost estimates, and reports for implementing electrical and instrumentation improvements including power distribution, lighting, instrumentation, control system development and programming, and communication systems. Provide technical support during construction from contract award through startup including supervision of acceptance testing of electrical and instrumentation and control system components and supervision of control system integration efforts. Maintain and update the District’s electrical and instrumentation design and construction standards and recommend new standards for development. Qualifications Education: A combination of education and experience equivalent to a bachelor’s degree in electrical engineering. A master’s degree in electrical engineering is preferred. For degrees obtained outside of the U.S., an official equivalency evaluation is required. Experience: Seven years of electrical engineering experience with the design and construction of motor control centers, variable frequency drives, engine controls, chemical dosing systems, lighting controls, HVAC controls, pneumatic control systems, and 24 VDC and 4-20 mA power and signal circuits. Supervisory experience is highly desirable. Experience with AVEVA Wonderware System Platform; Schneider Modicon PLCs and the ProWORX NxT, Schneider Electric Control Expert (formerly Unity Pro), and Concept programming environments; and communication systems including radio telemetry systems and industrial control Ethernet networks is desirable. License/Certifications Required Depending on the assignment, possession of a valid California Class C driver’s license may be required. Registered Professional Electrical Engineer in the State of California. Additional Information IRWD Corporate Values Irvine Ranch Water District believes that its values drive the character, culture, and capacity of our organization. IRWD was built on values, and we weave them into the fabric of everything we do. Values are the ingredients in our recipe for both institutional and individual success. They are a code of conduct to promote positive outcomes for others and ourselves. They are more than words on a wall or a website. We live by them every day. We pledge to keep them relevant in an ever-changing world. IRWD's employees enjoy working in a safe, supportive, and nurturing environment where they form strong bonds with fellow employees. To ensure effective communication and promote a collaborative team environment, employees report to work each day in the office or in the field, depending on their positions. The physical and mental demands described below are representative of those that must be met by employees to successfully perform the essential functions of this class. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Language Ability and Interpersonal Communication Ability to communicate effectively with all levels of office/field employees and management. Represent District in a professional manner when dealing with outside professionals and vendors. Ability to explain, demonstrate and clarify to others within well-established policies, procedures and standards, as well as the ability to follow specific instructions and respond to simple and difficult requests from others. Mathematical Ability Ability to add, subtract, multiply, divide and calculate percentages. Understanding of advanced principles and mathematical reasoning and the ability to successfully apply that knowledge to solve scientific and engineering problems. Technology Ability Proficient in the use of MS Office Suite (Word, Excel). Keyboarding abilities sufficient to perform the job. Judgment and Situational Reasoning Ability Ability to use good personal judgment and discretion in performing all job functions. Ability to remain calm in crisis and emergency situations. Ability to use discretion when handling and disseminating sensitive information. Physical Requirements Regularly required to sit, walk, bend, stoop and stand. Occasionally required to lift up to 25 lbs. Environmental Adaptability Noise level is generally equivalent to typical office environment. Ability to work in an environment which may expose employee to hazardous materials and environment. Occasional visits to construction sites where noise level may be higher than typical office environment. IRWD offers a comprehensive benefits package for eligible employees and their eligible dependents. These benefits include the following: retirement benefits; medical, dental, vision, and life insurance; anda variety of other benefits. Benefits may vary based on employment status. This benefits overview is intended to be a summary, is not intended to be all-inclusive,and may not be applicable to all employees. Retirement Employees hired on or after January 1, 2013: The District, in compliance with the California Public Employees' Pension Reform Act of 2012 (PEPRA), implemented a third tier for new employees hired on or after January 1, 2013. New employees hired on or after January 1, 2013 who have not been in PERS membership or in membership with a reciprocal retirement system within 6 months of hire date will receive benefits under the California Public Employees Retirement System at a 2 percent at age 62 formula. This formula gradually increases to a maximum benefits of 2.5 percent at age 67. Final compensation calculations will be based on the highest three-year average of regular recurring pay. The District pays the employer's share of these costs. The employee share of the pension cost of 7.50% is paid in full by the employees hired under this formula. Employees hired on or after September 29, 2012 or "Classic" PERS members hired on or after January 1, 2013: On September 24, 2012, the IRWD Board of Directors approved the addition of a second tier to the CalPERS retirement benefits. New employees hired on or after September 29th through December 31, 2012, and employees hired on or after January 1, 2013 who have been in PERS membership or in membership with a reciprocal retirement system, will receive benefits under the California Public Employees Retirement System at 2 percent at age 60 formula. This formula gradually increases to a maximum benefit of 2.418% at age 63. The District pays the employer share of these costs and the employee share of the pension cost of 7% is paid in full by the employees hired under this formula. Final retirement compensation calculations are based on the highest three-year average of regular, recurring pay. IRWDdoes not participate or pay into Social Security except for the Medicare portion. Medical Insurance IRWD contracts with CalPERS for medical insurance coverage. Employees may elect coverage from a variety of PPO and HMO plans. The employee and District contribution for health insurance varies by plan.Coverage is effective the first day of the month following the date of hire. Dental Insurance IRWD contracts with Delta Dental for dental coverage.IRWD pays 100% of the premium for dental coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Vision Insurance IRWD contracts with the EyeMed for vision coverage. IRWD pays 100% of the premium for vision coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Life Insurance Elgible employees are provided with life insurance coverage equal to three or four times their annual salary, depending on their level of compensation. Eligible dependents are also covered for a flat benefit amount. Coverage is effective the first day of the month following the date of hire. Deferred Compensation Participation in adeferred compensation plan is available through Empower Retirement. Enrollment is voluntary and contributions are employee-paid and subject to IRS limits. The District matches employee contributions up to 3% of base pay after 1 year of employment. Paid Vacation Eligible employees begin accruing vacation benefits at the rate of 80 hours per year for the first 5 years of employment and are eligible to use paid vacation time after 6 months of employment. Employees accrue 120 hours per year after 5 years of employment and 160 hours per year after 10 years of employment. Paid Holidays The District offers 11 scheduled paid holidaysplus one personal holiday per year. Sick Leave Eligible employees accrue 96 hours of sick leave annually. Flexible Spending Accounts Eligible employees may elect to participate in the District's Flex Advantage program. This program allows employees to deposit pre-tax dollars into special accounts to be used for a variety of purposes, including paying for qualified miscellaneous health care expenses and dependent care expenses. IRWD contracts with a third party administer to process payments from employee accounts using claim forms or a Flex Spending debit card. Educational Assistance The District will share in the pre-approved educational costs of tuition and books for employees who wish to attend college or take certification classes.
Mar 08, 2024
Full Time
General Description We are excited to announce that we are accepting applications for the position of Senior Engineer (Electrical). This position will remain open until filled. The District Irvine Ranch Water District (IRWD) is a progressive, values-driven agency, with an international reputation for its leading-edge financial management practices, water recycling program, water use efficiency practices, water banking, urban runoff treatment, and energy generation and storage. Established in 1961 as a California Water District under the provisions of the California Water Code, IRWD is an independent special district serving central Orange County. IRWD provides high-quality drinking water, reliable sewage collection and treatment, ground-breaking recycled water programs, and environmentally sound urban runoff treatment to its customers. As an independent, not-for-profit public agency, IRWD is governed by a publicly elected five-member Board of Directors. The Board is responsible for the District's policies and decision-making. Day-to-day operations are supervised by the General Manager. Additional information can be found at the District's website: www.IRWD.com . The Position The Senior Engineer (Electrical): Independently plans and oversees the planning, design, plan preparation, specifications, and cost estimates for water, sewage and recycled water systems engineering work, emphasizing design, construction, and operations; Coordinates various planning efforts and serves as project manager on complex and difficult design and construction projects related to capital improvement projects; Makes decisions on engineering issues; Supervises the work of engineering personnel. The ideal candidate for the Senior Engineer (Electrical) position will have the ability to manage multiple design and construction projects. They will be able to communicate the assignment of work and ensure clarity of roles and responsibilities to various consultants, contractors, and staff to ensure completion of project assignments and meet deadlines. The ideal candidate will be thorough when providing technical support and will be able to detect and address errors in the supervision of acceptance testing of electrical, instrumentation and control system components. They will be able to identify key stakeholders needed for the success of a project or process. Lastly, the ideal candidate will be able to prepare designs, plans, specifications, cost estimates, and reports that are clear and focused on what is expected or needs to be accomplished for the implementation of electrical and instrumentation improvements. Summary of Duties Act as Project Manager for large complex planning, design, and construction projects. Prepare and review designs submitted by consultants, developers, and other entities for compliance with standards. Prepare and review specifications and cost estimates. Review shop drawings and other construction submittals for compliance with the approved plans and specifications. Prepare progress estimates and recommend change orders/variances. Provide technical support of water, sewer, and recycled water system operational requirements. Maintain a variety of records and prepare correspondence and reports in a professional manner complying with District standards. Prepare agenda items and supporting material for Committee and Board action. Prepare Requests for Proposals for retaining consultants on engineering and planning projects. Coordinate projects and maintain good relationships with representatives from other water agencies, city, county, regulatory agencies, and landowners. Review work, give instruction, and evaluate performance of assigned personnel on a periodic basis. May supervise lower level staff. May participate in the selection, counseling, and training of employees. Assume the duties of the Engineering Manager as required. Operate personal computers including word processing, spreadsheet, presentation, scheduling, email, internet, and database software. Comply with District safety work-related practices and attend relevant safety training. Responsible for all other work-related duties. When assigned to Electrical: Plan, schedule, assign, monitor, and evaluate the work of technical staff and consultants engaged in preparing designs, plans, specifications, cost estimates, and reports for implementing electrical and instrumentation improvements including power distribution, lighting, instrumentation, control system development and programming, and communication systems. Provide technical support during construction from contract award through startup including supervision of acceptance testing of electrical and instrumentation and control system components and supervision of control system integration efforts. Maintain and update the District’s electrical and instrumentation design and construction standards and recommend new standards for development. Qualifications Education: A combination of education and experience equivalent to a bachelor’s degree in electrical engineering. A master’s degree in electrical engineering is preferred. For degrees obtained outside of the U.S., an official equivalency evaluation is required. Experience: Seven years of electrical engineering experience with the design and construction of motor control centers, variable frequency drives, engine controls, chemical dosing systems, lighting controls, HVAC controls, pneumatic control systems, and 24 VDC and 4-20 mA power and signal circuits. Supervisory experience is highly desirable. Experience with AVEVA Wonderware System Platform; Schneider Modicon PLCs and the ProWORX NxT, Schneider Electric Control Expert (formerly Unity Pro), and Concept programming environments; and communication systems including radio telemetry systems and industrial control Ethernet networks is desirable. License/Certifications Required Depending on the assignment, possession of a valid California Class C driver’s license may be required. Registered Professional Electrical Engineer in the State of California. Additional Information IRWD Corporate Values Irvine Ranch Water District believes that its values drive the character, culture, and capacity of our organization. IRWD was built on values, and we weave them into the fabric of everything we do. Values are the ingredients in our recipe for both institutional and individual success. They are a code of conduct to promote positive outcomes for others and ourselves. They are more than words on a wall or a website. We live by them every day. We pledge to keep them relevant in an ever-changing world. IRWD's employees enjoy working in a safe, supportive, and nurturing environment where they form strong bonds with fellow employees. To ensure effective communication and promote a collaborative team environment, employees report to work each day in the office or in the field, depending on their positions. The physical and mental demands described below are representative of those that must be met by employees to successfully perform the essential functions of this class. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Language Ability and Interpersonal Communication Ability to communicate effectively with all levels of office/field employees and management. Represent District in a professional manner when dealing with outside professionals and vendors. Ability to explain, demonstrate and clarify to others within well-established policies, procedures and standards, as well as the ability to follow specific instructions and respond to simple and difficult requests from others. Mathematical Ability Ability to add, subtract, multiply, divide and calculate percentages. Understanding of advanced principles and mathematical reasoning and the ability to successfully apply that knowledge to solve scientific and engineering problems. Technology Ability Proficient in the use of MS Office Suite (Word, Excel). Keyboarding abilities sufficient to perform the job. Judgment and Situational Reasoning Ability Ability to use good personal judgment and discretion in performing all job functions. Ability to remain calm in crisis and emergency situations. Ability to use discretion when handling and disseminating sensitive information. Physical Requirements Regularly required to sit, walk, bend, stoop and stand. Occasionally required to lift up to 25 lbs. Environmental Adaptability Noise level is generally equivalent to typical office environment. Ability to work in an environment which may expose employee to hazardous materials and environment. Occasional visits to construction sites where noise level may be higher than typical office environment. IRWD offers a comprehensive benefits package for eligible employees and their eligible dependents. These benefits include the following: retirement benefits; medical, dental, vision, and life insurance; anda variety of other benefits. Benefits may vary based on employment status. This benefits overview is intended to be a summary, is not intended to be all-inclusive,and may not be applicable to all employees. Retirement Employees hired on or after January 1, 2013: The District, in compliance with the California Public Employees' Pension Reform Act of 2012 (PEPRA), implemented a third tier for new employees hired on or after January 1, 2013. New employees hired on or after January 1, 2013 who have not been in PERS membership or in membership with a reciprocal retirement system within 6 months of hire date will receive benefits under the California Public Employees Retirement System at a 2 percent at age 62 formula. This formula gradually increases to a maximum benefits of 2.5 percent at age 67. Final compensation calculations will be based on the highest three-year average of regular recurring pay. The District pays the employer's share of these costs. The employee share of the pension cost of 7.50% is paid in full by the employees hired under this formula. Employees hired on or after September 29, 2012 or "Classic" PERS members hired on or after January 1, 2013: On September 24, 2012, the IRWD Board of Directors approved the addition of a second tier to the CalPERS retirement benefits. New employees hired on or after September 29th through December 31, 2012, and employees hired on or after January 1, 2013 who have been in PERS membership or in membership with a reciprocal retirement system, will receive benefits under the California Public Employees Retirement System at 2 percent at age 60 formula. This formula gradually increases to a maximum benefit of 2.418% at age 63. The District pays the employer share of these costs and the employee share of the pension cost of 7% is paid in full by the employees hired under this formula. Final retirement compensation calculations are based on the highest three-year average of regular, recurring pay. IRWDdoes not participate or pay into Social Security except for the Medicare portion. Medical Insurance IRWD contracts with CalPERS for medical insurance coverage. Employees may elect coverage from a variety of PPO and HMO plans. The employee and District contribution for health insurance varies by plan.Coverage is effective the first day of the month following the date of hire. Dental Insurance IRWD contracts with Delta Dental for dental coverage.IRWD pays 100% of the premium for dental coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Vision Insurance IRWD contracts with the EyeMed for vision coverage. IRWD pays 100% of the premium for vision coverage for eligible employees and their eligible dependents. Coverage is effective the first day of the month following the date of hire. Life Insurance Elgible employees are provided with life insurance coverage equal to three or four times their annual salary, depending on their level of compensation. Eligible dependents are also covered for a flat benefit amount. Coverage is effective the first day of the month following the date of hire. Deferred Compensation Participation in adeferred compensation plan is available through Empower Retirement. Enrollment is voluntary and contributions are employee-paid and subject to IRS limits. The District matches employee contributions up to 3% of base pay after 1 year of employment. Paid Vacation Eligible employees begin accruing vacation benefits at the rate of 80 hours per year for the first 5 years of employment and are eligible to use paid vacation time after 6 months of employment. Employees accrue 120 hours per year after 5 years of employment and 160 hours per year after 10 years of employment. Paid Holidays The District offers 11 scheduled paid holidaysplus one personal holiday per year. Sick Leave Eligible employees accrue 96 hours of sick leave annually. Flexible Spending Accounts Eligible employees may elect to participate in the District's Flex Advantage program. This program allows employees to deposit pre-tax dollars into special accounts to be used for a variety of purposes, including paying for qualified miscellaneous health care expenses and dependent care expenses. IRWD contracts with a third party administer to process payments from employee accounts using claim forms or a Flex Spending debit card. Educational Assistance The District will share in the pre-approved educational costs of tuition and books for employees who wish to attend college or take certification classes.
SOUTH ORANGE COUNTY COMMUNITY COLLEGE DISTRICT (SOCCC)
Mission Viejo, California, United States
Title: Senior HVAC Technician - EXTENDED Job Category: CSEA Job Opening Date: January 17, 2024 Job Closing Date: Location: Saddleback College Work Location: Mission Viejo, CA Department: Facilities, Maintenance, and Operations Pay Grade, for more information click on this link: https://www.socccd.edu/departments/human-resources/contracts-and-salary-schedules Pay Rate Type: Monthly Work Days: Monday - Friday Work Hours: 8:00 a.m. - 4:30 p.m. (Schedule and Shift are subject to change in accordance with the department needs.) Hours Per Week: 40 Percentage of Employment: 100% Months of Employment: 12 months Salary: Starting at $6,102 per month Required Documents: Resume and valid EPA Refrigerant Handling Certificate Job Description: Initial Screening Date: April 25, 2024 Required Documents: Resume and valid EPA Refrigerant Handling Certificate Applications missing the required documents will not be considered. Class specifications are intended to present a descriptive list of the range of duties performed by employees in the class. Specifications are not intended to reflect all duties performed within the job. SUMMARY DESCRIPTION Under direction from assigned supervisory and/or management staff, performs skilled work in the installation, servicing, repair, and maintenance of refrigeration, heating, ventilation and air conditioning equipment and systems; makes a variety of independent decisions related to HVAC systems; coordinates assigned projects related to HVAC systems and serves as the point person for contractors during the evening hours; operates and maintains a wide variety of hand and power tools and equipment; performs a variety of special projects; and assists in performing other skilled maintenance duties as assigned. May receive functional supervision, technical training and work direction from a Plant Engineer. DISTINGUISHING CHARACTERISTICS This is the advanced journey level class in the HVAC Technician series. Positions at this level are distinguished from other classes within the series by the level of responsibility assumed and the complexity of duties assigned including making independent decisions related to the HVAC system, dealing with contractors, and independently performing a variety of special projects. Employees in this classification work part of a shift alone without any direct supervision from higher level staff. Employees at this level are required to be fully trained in all procedures related to assigned area of responsibility. REPRESENTATIVE DUTIES The following duties are typical for this classification. Incumbents may not perform all of the listed duties and/or may be required to perform additional or different duties from those set forth below to address business needs and changing business practices. Inspect, test, troubleshoot, repair, maintain and service all types of heating, refrigeration, ventilation and air conditioning equipment and systems; ensure proper functioning; repair leaks and malfunctioning dampers in systems; make independent decisions related to the HVAC system when working alone during evening hours. Install, replace, repair and adjust valves, thermostats, fans, pressure and air regulators, filters, belts, fuses, controls, gauges, air compressors, blowers, dryers and pumps; test joints and insulate pipes of refrigeration and air conditioning systems; clean, lubricate and adjust systems as required. Test water used in air conditioning systems for proper levels of chemical treatment; maintain appropriate levels to maximize corrosion protection in cooling towers and water supply. Fabricate, repair and install duct work and chassis covers; cut threads and assemble pipe and tubing to other components of air conditioning, heating and refrigeration equipment. Perform inspections of powerhouses throughout the assigned campus; monitor operation of mechanical systems that supply air conditioning to buildings. Perform scheduled preventative maintenance on all air conditioning and related equipment. As assigned, assists in operating the Energy Management System in order to control time schedule and temperature of conditioned areas on campus. As assigned, assist outside contractors; provide information within the area of assignment; provide hands on assistance as necessary; inspect completed work and report punch-list items to supervisor; ensure problems are resolved. Coordinate assigned projects related to HVAC systems and serve as the point person for contractors during evening hours. Perform a variety of special projects as assigned during evening hours. Order, stock and maintain equipment and supplies. Provide assistance on various other maintenance and repair projects as assigned. Perform related duties as required. QUALIFICATIONS The following generally describes the knowledge and ability required to enter the job and/or be learned within a short period of time in order to successfully perform the assigned duties. Knowledge of: Advanced methods, practices, equipment and tools used in the repair and maintenance of air conditioning, heating and ventilation systems. Advanced methods and techniques of troubleshooting and diagnosing of HVAC malfunctions. HVAC system design, equipment capabilities and requirements. Electronic, pneumatic and mechanical principles as applied to the maintenance and repair of heating, ventilation and air conditioning systems. Operational characteristics of energy management systems and related components. Proper methods, materials, tools, terminology and equipment used in the HVAC trades. Methods and techniques of preparing and interpreting drawings, diagrams, schematics and blueprints. Time, material, and labor cost estimating principles and practices used in maintenance and repair projects. Occupational hazards and standard safety practices. Pertinent federal, state, and local codes, laws, and regulations. Ability to: Independently perform preventive HVAC maintenance work. Maintain, install and repair complex HVAC systems, equipment and components. Operate a variety of tools and equipment used in HVAC maintenance and repair work. Independently make decisions regarding the HVAC system. Read and interpret mechanical drawings, schematics, blueprints and sketches. Order and maintain parts and supplies according to established guidelines and repair requirements. Install, maintain and repair energy management systems and related components. Maintain detailed and accurate records. Ensure adherence to safe work practices and procedures. Work independently with little direction. Understand and follow oral and written instructions. Work with and exhibit sensitivity to and understanding of the varied racial, ethnic, cultural, sexual orientation, academic, socio-economic, and disabled populations of community college students. Communicate clearly and concisely, both orally and in writing. Establish and maintain effective working relationships with those contacted in the course of work. EDUCATION AND EXPERIENCE GUIDELINES Any combination of education and experience that would likely provide the required knowledge and abilities is qualifying. A typical way to obtain the knowledge and abilities would be: Education/Training: Equivalent to the completion of the twelfth grade supplemented by specialized training in the maintenance and repair of heating, air conditioning and ventilation systems or a related field. Experience: Three years of responsible experience in the maintenance and repair of heating and air conditioning equipment and systems. License or Certificate: Possession of a valid California driver's license and proof of insurability. Possession of a valid EPA Refrigerant Handling certificate. PHYSICAL DEMANDS AND WORKING ENVIRONMENT The conditions herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Environment: Work is performed in indoor and outdoor environments; travel from site to site; exposure to noise, dust, grease, smoke, fumes, noxious odors, gases, and all types of weather and temperature conditions; work and/or walk on various types of surfaces including slippery or uneven surfaces and rough terrain; exposure to electrical energy. Occasional exposure to risks controlled by safety precautions. Positions may be required to work extended hours including evenings and weekends. Physical: Primary functions require sufficient physical ability and mobility to walk, stand, and sit for prolonged periods of time; frequently stoop, bend, kneel, crouch, crawl, climb, reach, and twist; push, pull, lift, and/or carry moderate to heavy amounts of weights; requires a sense of touch, finger dexterity, gripping with fingers and hands; operate assigned equipment and vehicles; verbally communicate to exchange information. Vision: See in the normal visual range with or without correction. Hearing: Hear in the normal audio range with or without correction. SPECIAL COVID-19 NOTICE: Interviews may be held in-person (following all necessary precautions) or in a virtual format. Employees must reside in California while employed with the South Orange County Community College District (SOCCCD), even during remote work. Thank you for your continued interest in working at the SOCCCD. The SOCCCD is committed to protecting the health and wellbeing of students, faculty, staff, administrators, and the communities it serves. More information can be found on our District website by visiting https://www.socccd.edu/communications/covid-19-information . NOTICE TO ALL CANDIDATES FOR EMPLOYMENT: The Immigration Reform and Control Act of 1986, Public Law 99-603, requires that employers obtain documentation from every new employee which authorizes that individual to accept employment in this country. SOCCCD will not sponsor any visa applications. PLEASE NOTE: A California Public Employees Retirement System (CalPERS) retiree may not accept employment until after the first 180 days of retirement. Anyone retired from CalPERS accepting permanent employment with this District will be required to reinstate as an active CalPERS member. Please contact CalPERS for additional information regarding your retirement status. Any active vested member of California State Teachers Retirement System (CalSTRS), who accepts employment with the District to perform service that requires membership in CalPERS, is eligible to elect to continue retirement system coverage under CalSTRS DISABILITY ACCOMODATIONS: If you require special accommodations in the application and/or selection process, please notify District Human Resources at least two (2) business days prior to the Job Close Date/Initial Screening Date, by either calling (949) 582-4850 or sending an e-mail to hrinfodesk@socccd.edu. ATTENDANCE REQUIREMENT: Report to work on a regular and consistent basis, as scheduled, to assigned job. CAMPUS CRIME AND SAFETY AWARENESS: Information regarding campus crime and safety awareness can be found at www.saddleback.edu or www.ivc.edu. Paper copies are available in the District Human Resources office upon request. DIVERSITY, EQUITY, INCLUSION, AND EQUAL EMPLOYMENT OPPORTUNITY (EEO): The South Orange County Community College District is committed to creating an academic and work environment that fosters diversity, equity and inclusion and equal opportunity for all, and ensures that students, faculty, management and staff of all backgrounds feel welcome, included, supported, and safe. Our culture of belonging, openness, and inclusion, makes our district a unique and special place for individuals of all backgrounds. Our District and our colleges are looking for equity and inclusion-minded applicants who represent the full diversity of California and who demonstrate a sensitivity to the understanding of diverse academic, socioeconomic, cultural, disability, gender identity, sexual orientation, and ethnic backgrounds present within our community. When you join our District, you can expect to be part of an exciting, thriving, equity-focused, and inclusive community that approaches higher education with the lens of social justice and collaboration among students, faculty, staff, administration, and community partners. In deciding whether to apply for a position with our District, you are strongly encouraged to consider whether your values align with our District's mission and goals for EEO, Diversity, Equity, and Inclusion. SOCCCD IS AN EQUAL OPPORTUNITY EMPLOYER Important: You must complete your application for a posting by 11:59 p.m. , Pacific Standard Time, by the deadline, along with any required documents , in order to be considered for the position. Applicants must complete all fields/sections on the application. Do not type "See Resume" or leave any fields blank. Applicants must enter their work experience, education, etc. on the District application. Applications reflecting "See Resume" will be considered incomplete and will not be considered for recruitment.
Mar 07, 2024
Full Time
Title: Senior HVAC Technician - EXTENDED Job Category: CSEA Job Opening Date: January 17, 2024 Job Closing Date: Location: Saddleback College Work Location: Mission Viejo, CA Department: Facilities, Maintenance, and Operations Pay Grade, for more information click on this link: https://www.socccd.edu/departments/human-resources/contracts-and-salary-schedules Pay Rate Type: Monthly Work Days: Monday - Friday Work Hours: 8:00 a.m. - 4:30 p.m. (Schedule and Shift are subject to change in accordance with the department needs.) Hours Per Week: 40 Percentage of Employment: 100% Months of Employment: 12 months Salary: Starting at $6,102 per month Required Documents: Resume and valid EPA Refrigerant Handling Certificate Job Description: Initial Screening Date: April 25, 2024 Required Documents: Resume and valid EPA Refrigerant Handling Certificate Applications missing the required documents will not be considered. Class specifications are intended to present a descriptive list of the range of duties performed by employees in the class. Specifications are not intended to reflect all duties performed within the job. SUMMARY DESCRIPTION Under direction from assigned supervisory and/or management staff, performs skilled work in the installation, servicing, repair, and maintenance of refrigeration, heating, ventilation and air conditioning equipment and systems; makes a variety of independent decisions related to HVAC systems; coordinates assigned projects related to HVAC systems and serves as the point person for contractors during the evening hours; operates and maintains a wide variety of hand and power tools and equipment; performs a variety of special projects; and assists in performing other skilled maintenance duties as assigned. May receive functional supervision, technical training and work direction from a Plant Engineer. DISTINGUISHING CHARACTERISTICS This is the advanced journey level class in the HVAC Technician series. Positions at this level are distinguished from other classes within the series by the level of responsibility assumed and the complexity of duties assigned including making independent decisions related to the HVAC system, dealing with contractors, and independently performing a variety of special projects. Employees in this classification work part of a shift alone without any direct supervision from higher level staff. Employees at this level are required to be fully trained in all procedures related to assigned area of responsibility. REPRESENTATIVE DUTIES The following duties are typical for this classification. Incumbents may not perform all of the listed duties and/or may be required to perform additional or different duties from those set forth below to address business needs and changing business practices. Inspect, test, troubleshoot, repair, maintain and service all types of heating, refrigeration, ventilation and air conditioning equipment and systems; ensure proper functioning; repair leaks and malfunctioning dampers in systems; make independent decisions related to the HVAC system when working alone during evening hours. Install, replace, repair and adjust valves, thermostats, fans, pressure and air regulators, filters, belts, fuses, controls, gauges, air compressors, blowers, dryers and pumps; test joints and insulate pipes of refrigeration and air conditioning systems; clean, lubricate and adjust systems as required. Test water used in air conditioning systems for proper levels of chemical treatment; maintain appropriate levels to maximize corrosion protection in cooling towers and water supply. Fabricate, repair and install duct work and chassis covers; cut threads and assemble pipe and tubing to other components of air conditioning, heating and refrigeration equipment. Perform inspections of powerhouses throughout the assigned campus; monitor operation of mechanical systems that supply air conditioning to buildings. Perform scheduled preventative maintenance on all air conditioning and related equipment. As assigned, assists in operating the Energy Management System in order to control time schedule and temperature of conditioned areas on campus. As assigned, assist outside contractors; provide information within the area of assignment; provide hands on assistance as necessary; inspect completed work and report punch-list items to supervisor; ensure problems are resolved. Coordinate assigned projects related to HVAC systems and serve as the point person for contractors during evening hours. Perform a variety of special projects as assigned during evening hours. Order, stock and maintain equipment and supplies. Provide assistance on various other maintenance and repair projects as assigned. Perform related duties as required. QUALIFICATIONS The following generally describes the knowledge and ability required to enter the job and/or be learned within a short period of time in order to successfully perform the assigned duties. Knowledge of: Advanced methods, practices, equipment and tools used in the repair and maintenance of air conditioning, heating and ventilation systems. Advanced methods and techniques of troubleshooting and diagnosing of HVAC malfunctions. HVAC system design, equipment capabilities and requirements. Electronic, pneumatic and mechanical principles as applied to the maintenance and repair of heating, ventilation and air conditioning systems. Operational characteristics of energy management systems and related components. Proper methods, materials, tools, terminology and equipment used in the HVAC trades. Methods and techniques of preparing and interpreting drawings, diagrams, schematics and blueprints. Time, material, and labor cost estimating principles and practices used in maintenance and repair projects. Occupational hazards and standard safety practices. Pertinent federal, state, and local codes, laws, and regulations. Ability to: Independently perform preventive HVAC maintenance work. Maintain, install and repair complex HVAC systems, equipment and components. Operate a variety of tools and equipment used in HVAC maintenance and repair work. Independently make decisions regarding the HVAC system. Read and interpret mechanical drawings, schematics, blueprints and sketches. Order and maintain parts and supplies according to established guidelines and repair requirements. Install, maintain and repair energy management systems and related components. Maintain detailed and accurate records. Ensure adherence to safe work practices and procedures. Work independently with little direction. Understand and follow oral and written instructions. Work with and exhibit sensitivity to and understanding of the varied racial, ethnic, cultural, sexual orientation, academic, socio-economic, and disabled populations of community college students. Communicate clearly and concisely, both orally and in writing. Establish and maintain effective working relationships with those contacted in the course of work. EDUCATION AND EXPERIENCE GUIDELINES Any combination of education and experience that would likely provide the required knowledge and abilities is qualifying. A typical way to obtain the knowledge and abilities would be: Education/Training: Equivalent to the completion of the twelfth grade supplemented by specialized training in the maintenance and repair of heating, air conditioning and ventilation systems or a related field. Experience: Three years of responsible experience in the maintenance and repair of heating and air conditioning equipment and systems. License or Certificate: Possession of a valid California driver's license and proof of insurability. Possession of a valid EPA Refrigerant Handling certificate. PHYSICAL DEMANDS AND WORKING ENVIRONMENT The conditions herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Environment: Work is performed in indoor and outdoor environments; travel from site to site; exposure to noise, dust, grease, smoke, fumes, noxious odors, gases, and all types of weather and temperature conditions; work and/or walk on various types of surfaces including slippery or uneven surfaces and rough terrain; exposure to electrical energy. Occasional exposure to risks controlled by safety precautions. Positions may be required to work extended hours including evenings and weekends. Physical: Primary functions require sufficient physical ability and mobility to walk, stand, and sit for prolonged periods of time; frequently stoop, bend, kneel, crouch, crawl, climb, reach, and twist; push, pull, lift, and/or carry moderate to heavy amounts of weights; requires a sense of touch, finger dexterity, gripping with fingers and hands; operate assigned equipment and vehicles; verbally communicate to exchange information. Vision: See in the normal visual range with or without correction. Hearing: Hear in the normal audio range with or without correction. SPECIAL COVID-19 NOTICE: Interviews may be held in-person (following all necessary precautions) or in a virtual format. Employees must reside in California while employed with the South Orange County Community College District (SOCCCD), even during remote work. Thank you for your continued interest in working at the SOCCCD. The SOCCCD is committed to protecting the health and wellbeing of students, faculty, staff, administrators, and the communities it serves. More information can be found on our District website by visiting https://www.socccd.edu/communications/covid-19-information . NOTICE TO ALL CANDIDATES FOR EMPLOYMENT: The Immigration Reform and Control Act of 1986, Public Law 99-603, requires that employers obtain documentation from every new employee which authorizes that individual to accept employment in this country. SOCCCD will not sponsor any visa applications. PLEASE NOTE: A California Public Employees Retirement System (CalPERS) retiree may not accept employment until after the first 180 days of retirement. Anyone retired from CalPERS accepting permanent employment with this District will be required to reinstate as an active CalPERS member. Please contact CalPERS for additional information regarding your retirement status. Any active vested member of California State Teachers Retirement System (CalSTRS), who accepts employment with the District to perform service that requires membership in CalPERS, is eligible to elect to continue retirement system coverage under CalSTRS DISABILITY ACCOMODATIONS: If you require special accommodations in the application and/or selection process, please notify District Human Resources at least two (2) business days prior to the Job Close Date/Initial Screening Date, by either calling (949) 582-4850 or sending an e-mail to hrinfodesk@socccd.edu. ATTENDANCE REQUIREMENT: Report to work on a regular and consistent basis, as scheduled, to assigned job. CAMPUS CRIME AND SAFETY AWARENESS: Information regarding campus crime and safety awareness can be found at www.saddleback.edu or www.ivc.edu. Paper copies are available in the District Human Resources office upon request. DIVERSITY, EQUITY, INCLUSION, AND EQUAL EMPLOYMENT OPPORTUNITY (EEO): The South Orange County Community College District is committed to creating an academic and work environment that fosters diversity, equity and inclusion and equal opportunity for all, and ensures that students, faculty, management and staff of all backgrounds feel welcome, included, supported, and safe. Our culture of belonging, openness, and inclusion, makes our district a unique and special place for individuals of all backgrounds. Our District and our colleges are looking for equity and inclusion-minded applicants who represent the full diversity of California and who demonstrate a sensitivity to the understanding of diverse academic, socioeconomic, cultural, disability, gender identity, sexual orientation, and ethnic backgrounds present within our community. When you join our District, you can expect to be part of an exciting, thriving, equity-focused, and inclusive community that approaches higher education with the lens of social justice and collaboration among students, faculty, staff, administration, and community partners. In deciding whether to apply for a position with our District, you are strongly encouraged to consider whether your values align with our District's mission and goals for EEO, Diversity, Equity, and Inclusion. SOCCCD IS AN EQUAL OPPORTUNITY EMPLOYER Important: You must complete your application for a posting by 11:59 p.m. , Pacific Standard Time, by the deadline, along with any required documents , in order to be considered for the position. Applicants must complete all fields/sections on the application. Do not type "See Resume" or leave any fields blank. Applicants must enter their work experience, education, etc. on the District application. Applications reflecting "See Resume" will be considered incomplete and will not be considered for recruitment.
Cal State University (CSU) Humboldt
1 Harpst Street, Arcata, CA 95521, USA
Vacancy Announcement Faculty Tenure-Track P osition Starting Fall 2024 School of Engineering See attachment for full vacancy announcement: Tenure Track Faculty_ENGR_2425_Vacancy_Final.pdf Cal Poly Humboldt is a Hispanic-Serving Institution (HSI) that strives to foster an equitable and inclusive community that supports our students of diverse backgrounds. Cal Poly Humboldt is committed to achieving the goals of equal opportunity and endeavors to employ faculty and staff of the highest quality committed to working in a multicultural and multiracial community that reflects the diversity of the state. DESCRIPTION: California State Polytechnic University, Humboldt (Cal Poly Humboldt) invites applicants to join our growing set of Engineering programs. We are open to applicants who can serve program needs in one or more of our programs, which include: Energy Systems Engineering, Environmental Resources Engineering, Mechanical Engineering, and Engineering & Community Practice at the rank of Assistant Professor. We invite applicants whose expertise aligns with our needs in one or more of our program areas. We highly value scholars and teachers who bridge multiple areas and/or focus on applied problem solving for critical societal needs. We anticipate the new faculty member will be able to collaborate in developing, and launching new programs and facilities that will shape the future of engineering education and research at Cal Poly Humboldt. The School of Engineering is strategically building research expertise and capacity in the following focus areas : Mechanical Engineering Robotics and Sensors Accessible, universal, and user-centered design Mechatronics and robotics applied to societal and environmental priorities Automation and controls for critical infrastructure Energy Systems Engineering Clean energy microgrids and electric power systems Renewable energy generation and battery storage Zero emissions vehicles and transportation systems Offshore Wind Energy Efficient buildings and HVAC Environmental Resources Engineering Air Quality & Hazardous Waste Groundwater Modeling & Engineering Geology Environmental Modeling & Numerical Methods Low Impact Development & Natural Treatment Systems River Restoration & Hydraulic Modeling Engineering and Community Practice Any of the above expertise connected with: Community engagement or community-based projects Experience working with Indigenous or other historically-excluded communities Inclusive and/or decolonizing pedagogies Accessible and Inclusive Pedagogy: As an institution, Cal Poly Humboldt is committed to eliminating the equity gap in all student populations with dynamic, student-centered practices and policies that fully engage the campus community. The ideal candidate will share Cal Poly Humboldt’s commitment to helping its racially and socioeconomically diverse students succeed in their degree and career objectives. We value the ability to serve students from a broad range of cultural heritages, socioeconomic backgrounds, genders, ability and orientations. Therefore, we prioritize applicants who demonstrate they understand the benefits diversity brings to a professional educational community. The successful candidate will be an equity-minded individual committed to collaborating with faculty, classified staff, administration, and students who are also committed to closing equity gaps. RANK, SALARY AND BENEFITS: We seek to fill this position at the Assistant Professor rank; however, rank and salary are dependent on the appointee’s qualifications and experience. The Assistant Professor Classification annual salary range for this position is $64,860 - $143,928; the anticipated starting annual salary is $85,000. Cal Poly Humboldt provides an excellent benefits package for faculty. Information about benefits plans can be found at: http://www.humboldt.edu/forms/node/934 . PROFESSIONAL QUALIFICATIONS: An earned Ph.D. or equivalent in Engineering or any appropriate and related field from an accredited college or university is required at the time of appointment. If ABD, degree requirements must be completed by date of appointment. A successful candidate must have education and experience that prepares them to provide rich and varied applied learning opportunities for students related to the priorities described above, to engage in scholarly pursuits, and to contribute meaningful service to the department, college, university, and society. The successful candidate must demonstrate the following: Academic and/or professional background necessary to contribute to the development and growth of Engineering Programs that serve a diverse student population, with focus areas described above; Potential for, or evidence of effective teaching using a variety of methodologies; Potential for, or evidence of a robust research agenda, scholarship and creative activities; Potential for, or evidence of involving students in research and scholarly activity; Ability and/or interest to teach a broad range of undergraduate and graduate courses that meet program needs; Evidence of ability to communicate engineering design and analysis in a variety of contexts; Commitment to developing applied engineering design projects that engage students in serving authentic community needs; Commitment to and/or experience promoting and fostering a learning environment that is supportive of individuals from diverse backgrounds; Ability to collaborate and communicate effectively with diverse students and colleagues; Commitment to contribute to the departments’ mission to support minoritized students; and Commitment to participating in professional development opportunities that build effectiveness in areas of inclusion, intercultural communication, and advancing diversity. Preferred qualifications for this position include: Evidence for potential for excellence in teaching, scholarship, and service; Experience within the private and/or public sector working with clients, stakeholders, and communities to develop engineering projects and/or analysis; Ability to develop interdisciplinary scholarship that incorporates multiple epistemic frameworks including engineering; Ability to contribute to developing and supporting place-based learning communities; Ability to develop, implement, and assess programs in ways that advance equitable and inclusive learning communities; Research interest and methodologies that contribute to the understanding of diversity and equal opportunity; and Licensure as a professional engineer. Working in the state of California is a condition of employment for this position. Even if part or all of an employee's assignment can be performed remotely, the employee must maintain a permanent residence in the state of California. The employee must be able to accept on-campus instruction, as assigned, and come to campus when needed. At the time of appointment, the successful candidate, if not a U.S. citizen, must have authorization from the Bureau of Citizenship and Immigration Services to work in the United States. For information on the University policy on support for non-immigrant probationary faculty visa acquisition, please visit the Faculty Immigration Resources page: https://hraps.humboldt.edu/faculty-immigration-resources Evidence of degree(s) is required at time of hire. PROFESSIONAL DUTIES: Candidates should be committed to teaching excellence and to building a strong research record. Responsibilities include teaching for the Engineering program; the courses assigned to the candidate will include fundamental (lower division) engineering classes along with courses in Mechanical Engineering, Energy Systems Engineering, and/or Environmental Resources Engineering, and/or at the graduate level, that align with the candidate’s area of expertise. Instructional assignments will be consistent with the programmatic needs of the department and students. The primary professional responsibilities of instructional faculty members are: teaching, research, scholarship, and creative activity; and service to the University, profession and to the community. These responsibilities include: advising students, participation in campus and system-wide communities, maintaining office hours, working collaboratively and productively with colleagues, and participation in traditional academic functions. Probationary faculty are provided ongoing mentorship to be a successful member of the faculty. During the first two years of the probationary period, teaching responsibilities will be reduced by approximately one course each semester. The reduced teaching load supports the establishment of research, scholarship and/or creative activities required for retention, tenure, and promotion. Cal Poly Humboldt also continues to build unique and innovative learning opportunities for students, bridging multiple disciplines across the spectrum. Cal Poly Humboldt is a leader in “learning communities” that build relationships between students, faculty, staff, administrators, and the community. These communities incorporate environmental and social responsibility. GENERAL INFORMATION: The School of Engineering is part of the College of Natural Resources and Sciences at Cal Poly Humboldt. Our foundational curriculum for engineering students includes emphasizing a systems-thinking approach, skillfully applying computational methods and data analysis, seeking opportunities for applied design work to support learning, and valuing engineering work that is done in service to society. Cal Poly Humboldt emphasizes hands-on, place-based learning. Engineering students engage in frequent labs, field trips, and team-based projects, while enjoying a cooperative learning environment in classes that range from 12-70 students. The majority of engineering classes currently have fewer than 25 students. The School of Engineering and the University value diversity, inclusion and equity. Currently ⅔ of the fifteen tenure-track faculty identify as women, ⅔ of tenure-track faculty are BIPOC, 30% of engineering students self-identify as underrepresented, 35% of engineering students are first in family to attend university, and 36% of engineering students are Pell Grant eligible. The Engineering department has direct faculty and student links to the world-famous Arcata Marsh and Wildlife Sanctuary, Schatz Energy Research Center, and the Campus Center for Appropriate Technology. Opportunities exist to collaborate with and/or conduct research through these entities. Further information can be found online: https://engineering.humboldt.edu/ Cal Poly Humboldt sits on the traditional homelands of the Wiyot people in what is currently called Arcata, CA. The Wiyot people call the area Goudi’ni (over in the woods). The Cal Poly Humboldt campus in Northern California is in close proximity to several thriving Native American tribes and communities. Cal Poly Humboldt currently has the largest percentage of Native American students in the CSU system and has over 30 Native American faculty and staff many from local area California Indian tribes. Cal Poly Humboldt is home to a number of leading Native American programs including the Indian Tribal Education and Personnel Program (ITEPP) and the Indian Natural Resource, Science and Engineering Program (INRSEP). There are also many opportunities at Cal Poly Humboldt to conduct research, teaching and community work on Native American history and cultures in Special Collections at the Cal Poly Humboldt library. The Humboldt Room in the Library has fantastic resources for tribally focused archive materials from the region. Cal Poly Humboldt strives to build a supportive and inclusive Native community and engages with Native communities through various initiatives and opportunities like the annual California Indian Big Time and Indigenous People’s Week and a chance to network with other faculty and staff as part of the Cal Poly Humboldt Council of American Indian Faculty and Staff. For more information, please visit: www.humboldt.edu/nasp APPLICATION: Qualified candidates should submit the following materials through PageUp: Letter of Application; Curriculum Vitae; Diversity Statement, include your understanding of the barriers facing Black, Indigenous, and other people of Color (BIPOC) in higher education and your past and/or future contributions to inclusive student success, including equitable access and outcomes through teaching and professional or public service. Applicants are encouraged to highlight any contributions they have made towards the inclusivity of students from the LGBTIQ+ community. (2 page limit); Statement of Teaching Philosophy, including how it relates to supporting students who have been historically marginalized and/or minoritized; Statement of Research Interests; Teaching Evaluations, if available; Graduate Transcripts (unofficial copies are sufficient for initial review); and Names and Contact Information for Three (3) Professional References. Additional application materials may be requested at a later time. Questions concerning the application process may be directed to: aps@humboldt.edu Questions concerning this position may be directed to: Elizabeth Eschenbach, Search Committee Chair, elizabeth.eschenbach@humboldt.edu Please refer to the requisition job number on all correspondence and inquiries regarding this position. APPLICATION DEADLINE : This position is open until filled. First consideration will be given to completed applications received no later than February 15, 2024 , applications received after screening has begun will be considered at the discretion of the university. Early response is encouraged. _____________________________________________________________________________________________________________ See more photos at Cal Poly Humboldt’s Flickr page . It is the responsibility of the applicant to provide complete and accurate employment information. Evidence of required degree(s), certification(s), or license(s) will be required prior to the appointment date. A background check (including a criminal records check, employment verification, and education verification) must be completed satisfactorily as a condition of employment with the CSU. Certain positions may also require a credit check, motor vehicle report, and/or fingerprinting through Live Scan service. Adverse findings from a background check may affect the application status of applicants or continued employment of current CSU employees who apply for the position. All CSU employees are obligated to respond to and report incidents of sexual harassment and sexual violence. Compliance with the California Child Abuse and Neglect Reporting Act (CANRA) and CSU Executive Order 1083 Revised July 21, 2017 (EO 1083) is a condition of employment. CSU employees in positions with duties that involve regular contact with children or positions which supervise such employees are designated as Mandated Reporters under CANRA and are required to comply with the requirements set forth in EO 1083. Upon appointment to this position, the successful candidate(s) will be notified of and required to acknowledge their CANRA reporting status. New employees hired by the CSU for the first time who first become CalPERS members on or after July 1, 2017 are subject to a 10 year vesting period for retiree health and dental benefits. Cal Poly Humboldt is a Title IX/Affirmative Action/Equal Opportunity Employer. We consider qualified applicants for employment without regard to race, religion, color, national origin, ancestry, age, sex, gender, gender identity, gender expression, sexual orientation, genetic information, medical condition, disability, marital status, protected veteran status, or any other legally protected status. If accommodations need to be made during the recruitment and interview process, please contact Human Resources at (707) 826-3626 or hr@humboldt.edu At Cal Poly Humboldt, bold hearts and open minds shape the future. Cal Poly Humboldt is part of the 23-campus California State University system. The University has a comprehensive arts and sciences curriculum, which is recognized nationally for its high academic quality. Founded in 1913, Cal Poly Humboldt began as a small college for teachers. Today Humboldt has grown into a comprehensive university with rigorous science and liberal arts programs. Designated a polytechnic in 2022, Cal Poly Humboldt provides hands-on, impactful educational opportunities that lead to meaningful, measurable outcomes for the individual, for the state, and the world. Cal Poly Humboldt is proud to have nearly 6,000 students of all backgrounds spread across 61 majors, 13 graduate programs, and 4 credential programs - all of whom contribute passion and creativity within their fields and set the stage for a future grounded in equity and sustainability. Hands-on learning, inspired teaching, groundbreaking research, and thought-provoking creative activity happen daily at Humboldt. Finding a better future is a task for the bold, open, down-to-earth, and visionary. Cal Poly Humboldt strives to cultivate these qualities in leaders, innovators, and scholars in every field. Cal Poly Humboldt’s main campus is located in Arcata, California, in the northwestern part of the state along the coast, situated among redwood trees in an area that offers unmatched scenic beauty, moderate climate and opportunities for outdoor activities. The surrounding Humboldt County locale has a population of around 130,000. The community offers an excellent range of businesses, services and cultural activities/performances. The local schools are ranked in the top performance percentiles, both nationally and in the state. Additional information about Cal Poly Humboldt can be found at: http://www.humboldt.edu . Advertised: Dec 20 2023 Pacific Standard Time Applications close: Closing Date/Time:
Mar 07, 2024
Vacancy Announcement Faculty Tenure-Track P osition Starting Fall 2024 School of Engineering See attachment for full vacancy announcement: Tenure Track Faculty_ENGR_2425_Vacancy_Final.pdf Cal Poly Humboldt is a Hispanic-Serving Institution (HSI) that strives to foster an equitable and inclusive community that supports our students of diverse backgrounds. Cal Poly Humboldt is committed to achieving the goals of equal opportunity and endeavors to employ faculty and staff of the highest quality committed to working in a multicultural and multiracial community that reflects the diversity of the state. DESCRIPTION: California State Polytechnic University, Humboldt (Cal Poly Humboldt) invites applicants to join our growing set of Engineering programs. We are open to applicants who can serve program needs in one or more of our programs, which include: Energy Systems Engineering, Environmental Resources Engineering, Mechanical Engineering, and Engineering & Community Practice at the rank of Assistant Professor. We invite applicants whose expertise aligns with our needs in one or more of our program areas. We highly value scholars and teachers who bridge multiple areas and/or focus on applied problem solving for critical societal needs. We anticipate the new faculty member will be able to collaborate in developing, and launching new programs and facilities that will shape the future of engineering education and research at Cal Poly Humboldt. The School of Engineering is strategically building research expertise and capacity in the following focus areas : Mechanical Engineering Robotics and Sensors Accessible, universal, and user-centered design Mechatronics and robotics applied to societal and environmental priorities Automation and controls for critical infrastructure Energy Systems Engineering Clean energy microgrids and electric power systems Renewable energy generation and battery storage Zero emissions vehicles and transportation systems Offshore Wind Energy Efficient buildings and HVAC Environmental Resources Engineering Air Quality & Hazardous Waste Groundwater Modeling & Engineering Geology Environmental Modeling & Numerical Methods Low Impact Development & Natural Treatment Systems River Restoration & Hydraulic Modeling Engineering and Community Practice Any of the above expertise connected with: Community engagement or community-based projects Experience working with Indigenous or other historically-excluded communities Inclusive and/or decolonizing pedagogies Accessible and Inclusive Pedagogy: As an institution, Cal Poly Humboldt is committed to eliminating the equity gap in all student populations with dynamic, student-centered practices and policies that fully engage the campus community. The ideal candidate will share Cal Poly Humboldt’s commitment to helping its racially and socioeconomically diverse students succeed in their degree and career objectives. We value the ability to serve students from a broad range of cultural heritages, socioeconomic backgrounds, genders, ability and orientations. Therefore, we prioritize applicants who demonstrate they understand the benefits diversity brings to a professional educational community. The successful candidate will be an equity-minded individual committed to collaborating with faculty, classified staff, administration, and students who are also committed to closing equity gaps. RANK, SALARY AND BENEFITS: We seek to fill this position at the Assistant Professor rank; however, rank and salary are dependent on the appointee’s qualifications and experience. The Assistant Professor Classification annual salary range for this position is $64,860 - $143,928; the anticipated starting annual salary is $85,000. Cal Poly Humboldt provides an excellent benefits package for faculty. Information about benefits plans can be found at: http://www.humboldt.edu/forms/node/934 . PROFESSIONAL QUALIFICATIONS: An earned Ph.D. or equivalent in Engineering or any appropriate and related field from an accredited college or university is required at the time of appointment. If ABD, degree requirements must be completed by date of appointment. A successful candidate must have education and experience that prepares them to provide rich and varied applied learning opportunities for students related to the priorities described above, to engage in scholarly pursuits, and to contribute meaningful service to the department, college, university, and society. The successful candidate must demonstrate the following: Academic and/or professional background necessary to contribute to the development and growth of Engineering Programs that serve a diverse student population, with focus areas described above; Potential for, or evidence of effective teaching using a variety of methodologies; Potential for, or evidence of a robust research agenda, scholarship and creative activities; Potential for, or evidence of involving students in research and scholarly activity; Ability and/or interest to teach a broad range of undergraduate and graduate courses that meet program needs; Evidence of ability to communicate engineering design and analysis in a variety of contexts; Commitment to developing applied engineering design projects that engage students in serving authentic community needs; Commitment to and/or experience promoting and fostering a learning environment that is supportive of individuals from diverse backgrounds; Ability to collaborate and communicate effectively with diverse students and colleagues; Commitment to contribute to the departments’ mission to support minoritized students; and Commitment to participating in professional development opportunities that build effectiveness in areas of inclusion, intercultural communication, and advancing diversity. Preferred qualifications for this position include: Evidence for potential for excellence in teaching, scholarship, and service; Experience within the private and/or public sector working with clients, stakeholders, and communities to develop engineering projects and/or analysis; Ability to develop interdisciplinary scholarship that incorporates multiple epistemic frameworks including engineering; Ability to contribute to developing and supporting place-based learning communities; Ability to develop, implement, and assess programs in ways that advance equitable and inclusive learning communities; Research interest and methodologies that contribute to the understanding of diversity and equal opportunity; and Licensure as a professional engineer. Working in the state of California is a condition of employment for this position. Even if part or all of an employee's assignment can be performed remotely, the employee must maintain a permanent residence in the state of California. The employee must be able to accept on-campus instruction, as assigned, and come to campus when needed. At the time of appointment, the successful candidate, if not a U.S. citizen, must have authorization from the Bureau of Citizenship and Immigration Services to work in the United States. For information on the University policy on support for non-immigrant probationary faculty visa acquisition, please visit the Faculty Immigration Resources page: https://hraps.humboldt.edu/faculty-immigration-resources Evidence of degree(s) is required at time of hire. PROFESSIONAL DUTIES: Candidates should be committed to teaching excellence and to building a strong research record. Responsibilities include teaching for the Engineering program; the courses assigned to the candidate will include fundamental (lower division) engineering classes along with courses in Mechanical Engineering, Energy Systems Engineering, and/or Environmental Resources Engineering, and/or at the graduate level, that align with the candidate’s area of expertise. Instructional assignments will be consistent with the programmatic needs of the department and students. The primary professional responsibilities of instructional faculty members are: teaching, research, scholarship, and creative activity; and service to the University, profession and to the community. These responsibilities include: advising students, participation in campus and system-wide communities, maintaining office hours, working collaboratively and productively with colleagues, and participation in traditional academic functions. Probationary faculty are provided ongoing mentorship to be a successful member of the faculty. During the first two years of the probationary period, teaching responsibilities will be reduced by approximately one course each semester. The reduced teaching load supports the establishment of research, scholarship and/or creative activities required for retention, tenure, and promotion. Cal Poly Humboldt also continues to build unique and innovative learning opportunities for students, bridging multiple disciplines across the spectrum. Cal Poly Humboldt is a leader in “learning communities” that build relationships between students, faculty, staff, administrators, and the community. These communities incorporate environmental and social responsibility. GENERAL INFORMATION: The School of Engineering is part of the College of Natural Resources and Sciences at Cal Poly Humboldt. Our foundational curriculum for engineering students includes emphasizing a systems-thinking approach, skillfully applying computational methods and data analysis, seeking opportunities for applied design work to support learning, and valuing engineering work that is done in service to society. Cal Poly Humboldt emphasizes hands-on, place-based learning. Engineering students engage in frequent labs, field trips, and team-based projects, while enjoying a cooperative learning environment in classes that range from 12-70 students. The majority of engineering classes currently have fewer than 25 students. The School of Engineering and the University value diversity, inclusion and equity. Currently ⅔ of the fifteen tenure-track faculty identify as women, ⅔ of tenure-track faculty are BIPOC, 30% of engineering students self-identify as underrepresented, 35% of engineering students are first in family to attend university, and 36% of engineering students are Pell Grant eligible. The Engineering department has direct faculty and student links to the world-famous Arcata Marsh and Wildlife Sanctuary, Schatz Energy Research Center, and the Campus Center for Appropriate Technology. Opportunities exist to collaborate with and/or conduct research through these entities. Further information can be found online: https://engineering.humboldt.edu/ Cal Poly Humboldt sits on the traditional homelands of the Wiyot people in what is currently called Arcata, CA. The Wiyot people call the area Goudi’ni (over in the woods). The Cal Poly Humboldt campus in Northern California is in close proximity to several thriving Native American tribes and communities. Cal Poly Humboldt currently has the largest percentage of Native American students in the CSU system and has over 30 Native American faculty and staff many from local area California Indian tribes. Cal Poly Humboldt is home to a number of leading Native American programs including the Indian Tribal Education and Personnel Program (ITEPP) and the Indian Natural Resource, Science and Engineering Program (INRSEP). There are also many opportunities at Cal Poly Humboldt to conduct research, teaching and community work on Native American history and cultures in Special Collections at the Cal Poly Humboldt library. The Humboldt Room in the Library has fantastic resources for tribally focused archive materials from the region. Cal Poly Humboldt strives to build a supportive and inclusive Native community and engages with Native communities through various initiatives and opportunities like the annual California Indian Big Time and Indigenous People’s Week and a chance to network with other faculty and staff as part of the Cal Poly Humboldt Council of American Indian Faculty and Staff. For more information, please visit: www.humboldt.edu/nasp APPLICATION: Qualified candidates should submit the following materials through PageUp: Letter of Application; Curriculum Vitae; Diversity Statement, include your understanding of the barriers facing Black, Indigenous, and other people of Color (BIPOC) in higher education and your past and/or future contributions to inclusive student success, including equitable access and outcomes through teaching and professional or public service. Applicants are encouraged to highlight any contributions they have made towards the inclusivity of students from the LGBTIQ+ community. (2 page limit); Statement of Teaching Philosophy, including how it relates to supporting students who have been historically marginalized and/or minoritized; Statement of Research Interests; Teaching Evaluations, if available; Graduate Transcripts (unofficial copies are sufficient for initial review); and Names and Contact Information for Three (3) Professional References. Additional application materials may be requested at a later time. Questions concerning the application process may be directed to: aps@humboldt.edu Questions concerning this position may be directed to: Elizabeth Eschenbach, Search Committee Chair, elizabeth.eschenbach@humboldt.edu Please refer to the requisition job number on all correspondence and inquiries regarding this position. APPLICATION DEADLINE : This position is open until filled. First consideration will be given to completed applications received no later than February 15, 2024 , applications received after screening has begun will be considered at the discretion of the university. Early response is encouraged. _____________________________________________________________________________________________________________ See more photos at Cal Poly Humboldt’s Flickr page . It is the responsibility of the applicant to provide complete and accurate employment information. Evidence of required degree(s), certification(s), or license(s) will be required prior to the appointment date. A background check (including a criminal records check, employment verification, and education verification) must be completed satisfactorily as a condition of employment with the CSU. Certain positions may also require a credit check, motor vehicle report, and/or fingerprinting through Live Scan service. Adverse findings from a background check may affect the application status of applicants or continued employment of current CSU employees who apply for the position. All CSU employees are obligated to respond to and report incidents of sexual harassment and sexual violence. Compliance with the California Child Abuse and Neglect Reporting Act (CANRA) and CSU Executive Order 1083 Revised July 21, 2017 (EO 1083) is a condition of employment. CSU employees in positions with duties that involve regular contact with children or positions which supervise such employees are designated as Mandated Reporters under CANRA and are required to comply with the requirements set forth in EO 1083. Upon appointment to this position, the successful candidate(s) will be notified of and required to acknowledge their CANRA reporting status. New employees hired by the CSU for the first time who first become CalPERS members on or after July 1, 2017 are subject to a 10 year vesting period for retiree health and dental benefits. Cal Poly Humboldt is a Title IX/Affirmative Action/Equal Opportunity Employer. We consider qualified applicants for employment without regard to race, religion, color, national origin, ancestry, age, sex, gender, gender identity, gender expression, sexual orientation, genetic information, medical condition, disability, marital status, protected veteran status, or any other legally protected status. If accommodations need to be made during the recruitment and interview process, please contact Human Resources at (707) 826-3626 or hr@humboldt.edu At Cal Poly Humboldt, bold hearts and open minds shape the future. Cal Poly Humboldt is part of the 23-campus California State University system. The University has a comprehensive arts and sciences curriculum, which is recognized nationally for its high academic quality. Founded in 1913, Cal Poly Humboldt began as a small college for teachers. Today Humboldt has grown into a comprehensive university with rigorous science and liberal arts programs. Designated a polytechnic in 2022, Cal Poly Humboldt provides hands-on, impactful educational opportunities that lead to meaningful, measurable outcomes for the individual, for the state, and the world. Cal Poly Humboldt is proud to have nearly 6,000 students of all backgrounds spread across 61 majors, 13 graduate programs, and 4 credential programs - all of whom contribute passion and creativity within their fields and set the stage for a future grounded in equity and sustainability. Hands-on learning, inspired teaching, groundbreaking research, and thought-provoking creative activity happen daily at Humboldt. Finding a better future is a task for the bold, open, down-to-earth, and visionary. Cal Poly Humboldt strives to cultivate these qualities in leaders, innovators, and scholars in every field. Cal Poly Humboldt’s main campus is located in Arcata, California, in the northwestern part of the state along the coast, situated among redwood trees in an area that offers unmatched scenic beauty, moderate climate and opportunities for outdoor activities. The surrounding Humboldt County locale has a population of around 130,000. The community offers an excellent range of businesses, services and cultural activities/performances. The local schools are ranked in the top performance percentiles, both nationally and in the state. Additional information about Cal Poly Humboldt can be found at: http://www.humboldt.edu . Advertised: Dec 20 2023 Pacific Standard Time Applications close: Closing Date/Time: