Quality Control Specialist with Security Clearance

Position Type: Full-Time, ExemptWork Location: Orogrande, NM (White Sands Missile Range)Systems Application & Technologies, Inc. (SA-TECH) is a progressive and well-established Department of Defense (DoD) contractor specializing in range operations and maintenance (O&M); weapons testing; facilities management; aerial, ground and seaborne targets O&M; technical, logistics and other engineering support; systems integration; electronics and communications maintenance services; and a growing cybersecurity business.We are highly focused and, among other efforts, currently operate a dozen active test and/or training ranges for the Army, Air Force and Navy. Our 36‑year heritage is founded on supporting complex and diverse DoD programs and we've developed a standout reputation for providing the highest quality services, superior workmanship and cost‑effective results while achieving complete customer satisfaction.SA-TECH provides the U. S. Army, other U.S. agencies and allied nations with Aerial Target Flight Services (ATFS), operating and maintaining aerial target flight operations for any directed mission and aerial target flight operations and maintenance services at Fort Bliss, TX; White Sands Missile Range (WSMR), NM; and other Posts, Camps, and Stations (PCS) in the Continental United States (CONUS) and Outside CONUS (OCONUS).We are currently seeking to hire a Quality Control Specialist (QCS) at WSMR based out of our facilities in Orogrande, NM.Primary ResponsibilitiesDevelop and implement quality control, ground safety and environmental programs to ensure compliance with contract specifications.Perform audits on work centers, maintenance actions, documentation, equipment, facilities and any items identified in the contract that require quality control.Generate reports to meet contractual and company requirements.Review, audit and develop processes to identify trends.Provide trend analysis with supporting graphs and documentation.Obtain technical data from appropriate sources and ensure appropriate areas are up to date.Initiate and review all quality reports, i.e., IPQDRs, mishap reports, flight analysis, etc.Assist contract personnel and approved government personnel in resolving problems, developing new technical data or developing processes.Perform maintenance actions as needed to maintain currency for training and inspection completion.Perform duties as a quality aviation inspector, inspecting work performed by technicians and/or aircraft mechanics, such as modifications or repairs/overhaul of aircraft and/or aircraft systems.Ensure conformance to service guidance, engineering specifications, and customer requirements and adhere to aviation standards, engineering drawings/blueprints, and company standard operating procedures (SOPs).Inspect maintenance tasks, field level modifications, and completed repair tasks on aircraft or uninstalled components.Inspect for airworthiness and quality of aircraft maintenance and alterations.Release aircraft for flight, as applicable.Document non-conformance/malfunctions in applicable logbooks or workbooks.Complete non-conformance and corrective action reports (NCR) as required.Verify/witness torque and verify completeness of critical safety items (CSI).Provide “OK to Install” for aircraft component parts.Conduct weight and balance tasks as required.Follow/adhere to company FOD SOP and tool control procedures.Perform receiving inspections on DoD or FAA parts.Identify and communicate continuous improvement opportunities.Provide guidance and work leadership to less‑experienced staff members or assist maintenance leaders.Carry out inspection duties at both domestic and international locations, as assigned.Be willing to work irregular hours to support projects if needed.Perform other duties and related tasks within scope as assigned by a supervisor.Work ConditionsOperations will vary but most work will be accomplished in enclosed buildings.Work on the range throughout the year so temperatures will vary over the course of the year.Work includes cross‑utilization into other positions that fall within our scope of work.The position will require overtime and weekend work.Must be able to lift 50 lbs., unassisted, to the waist.Must be able to deploy to both CONUS and OCONUS for short stints.RequirementsHigh School diploma or GED.Must have completed military aviation maintenance training or aviation maintenance technical school curriculum or possess an FAA‑issued A&P license (or equivalent).Understanding of Environmental, Health and Safety programs such as lockout tag‑out, hazardous materials, shelf life requirements, etc.Experience with aircraft records management as well as tool and FOD controls and training programs.Proficiency in AS9100/AS9110 and DCMAI 8210.Knowledge of researching technical orders, processing‑engineering requests, and munitions management.Proficient with Microsoft Office suite, including Word, PowerPoint, Access and Excel.Current NM or TX driver's license required; must be able to be insured through company's vehicle insurance policy while driving work/government/rental vehicles during working hours, and for the duration of employment.U.S. citizenship required and must be able to obtain a U.S. DoD interim Security Clearance at the SECRET level before start and a final Secret‑level clearance must be achieved within 45 days of start date and maintained throughout employment.All candidates will be required to pass background screening to include SSN, driver record, and criminal background investigation.Employee BenefitsMedical, Dental, VisionLife InsuranceLong‑Term Disability401(k) matchFlexible Spending AccountsEAPEducation AssistancePTO and HolidaysVacation and Sick LeaveAdditional InformationBy applying to this posting, you express interest in the position and may be considered for other opportunities within the company that match your skills.SA‑TECH is an Equal Opportunity/Affirmative Action employer and evaluates all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, disability, or protected veteran status. We participate in the E‑Verify system to verify work authorization in the U.S.Applicants are encouraged to apply within 5–15 days of posting for optimal consideration. We prioritize a supportive work environment, professional development, and a healthy work‑life balance, and our pay and benefits aim to enhance employee well‑being.All responses will be handled with strict confidentiality. (Salary information is a guideline; final offers consider various factors.)#J-18808-Ljbffr

Position Type: Full-Time, ExemptWork Location: Orogrande, NM (White Sands Missile Range)Systems Application & Technologies, Inc. (SA-TECH) is a progressive and well-established Department of Defense (DoD) contractor specializing in range operations and maintenance (O&M); weapons testing; facilities management; aerial, ground and seaborne targets O&M; technical, logistics and other engineering support; systems integration; electronics and communications maintenance services; and a growing cybersecurity business.We are highly focused and, among other efforts, currently operate a dozen active test and/or training ranges for the Army, Air Force and Navy. Our 36‑year heritage is founded on supporting complex and diverse DoD programs and we've developed a standout reputation for providing the highest quality services, superior workmanship and cost‑effective results while achieving complete customer satisfaction.SA-TECH provides the U. S. Army, other U.S. agencies and allied nations with Aerial Target Flight Services (ATFS), operating and maintaining aerial target flight operations for any directed mission and aerial target flight operations and maintenance services at Fort Bliss, TX; White Sands Missile Range (WSMR), NM; and other Posts, Camps, and Stations (PCS) in the Continental United States (CONUS) and Outside CONUS (OCONUS).We are currently seeking to hire a Quality Control Specialist (QCS) at WSMR based out of our facilities in Orogrande, NM.Primary ResponsibilitiesDevelop and implement quality control, ground safety and environmental programs to ensure compliance with contract specifications.Perform audits on work centers, maintenance actions, documentation, equipment, facilities and any items identified in the contract that require quality control.Generate reports to meet contractual and company requirements.Review, audit and develop processes to identify trends.Provide trend analysis with supporting graphs and documentation.Obtain technical data from appropriate sources and ensure appropriate areas are up to date.Initiate and review all quality reports, i.e., IPQDRs, mishap reports, flight analysis, etc.Assist contract personnel and approved government personnel in resolving problems, developing new technical data or developing processes.Perform maintenance actions as needed to maintain currency for training and inspection completion.Perform duties as a quality aviation inspector, inspecting work performed by technicians and/or aircraft mechanics, such as modifications or repairs/overhaul of aircraft and/or aircraft systems.Ensure conformance to service guidance, engineering specifications, and customer requirements and adhere to aviation standards, engineering drawings/blueprints, and company standard operating procedures (SOPs).Inspect maintenance tasks, field level modifications, and completed repair tasks on aircraft or uninstalled components.Inspect for airworthiness and quality of aircraft maintenance and alterations.Release aircraft for flight, as applicable.Document non-conformance/malfunctions in applicable logbooks or workbooks.Complete non-conformance and corrective action reports (NCR) as required.Verify/witness torque and verify completeness of critical safety items (CSI).Provide “OK to Install” for aircraft component parts.Conduct weight and balance tasks as required.Follow/adhere to company FOD SOP and tool control procedures.Perform receiving inspections on DoD or FAA parts.Identify and communicate continuous improvement opportunities.Provide guidance and work leadership to less‑experienced staff members or assist maintenance leaders.Carry out inspection duties at both domestic and international locations, as assigned.Be willing to work irregular hours to support projects if needed.Perform other duties and related tasks within scope as assigned by a supervisor.Work ConditionsOperations will vary but most work will be accomplished in enclosed buildings.Work on the range throughout the year so temperatures will vary over the course of the year.Work includes cross‑utilization into other positions that fall within our scope of work.The position will require overtime and weekend work.Must be able to lift 50 lbs., unassisted, to the waist.Must be able to deploy to both CONUS and OCONUS for short stints.RequirementsHigh School diploma or GED.Must have completed military aviation maintenance training or aviation maintenance technical school curriculum or possess an FAA‑issued A&P license (or equivalent).Understanding of Environmental, Health and Safety programs such as lockout tag‑out, hazardous materials, shelf life requirements, etc.Experience with aircraft records management as well as tool and FOD controls and training programs.Proficiency in AS9100/AS9110 and DCMAI 8210.Knowledge of researching technical orders, processing‑engineering requests, and munitions management.Proficient with Microsoft Office suite, including Word, PowerPoint, Access and Excel.Current NM or TX driver's license required; must be able to be insured through company's vehicle insurance policy while driving work/government/rental vehicles during working hours, and for the duration of employment.U.S. citizenship required and must be able to obtain a U.S. DoD interim Security Clearance at the SECRET level before start and a final Secret‑level clearance must be achieved within 45 days of start date and maintained throughout employment.All candidates will be required to pass background screening to include SSN, driver record, and criminal background investigation.Employee BenefitsMedical, Dental, VisionLife InsuranceLong‑Term Disability401(k) matchFlexible Spending AccountsEAPEducation AssistancePTO and HolidaysVacation and Sick LeaveAdditional InformationBy applying to this posting, you express interest in the position and may be considered for other opportunities within the company that match your skills.SA‑TECH is an Equal Opportunity/Affirmative Action employer and evaluates all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, disability, or protected veteran status. We participate in the E‑Verify system to verify work authorization in the U.S.Applicants are encouraged to apply within 5–15 days of posting for optimal consideration. We prioritize a supportive work environment, professional development, and a healthy work‑life balance, and our pay and benefits aim to enhance employee well‑being.All responses will be handled with strict confidentiality. (Salary information is a guideline; final offers consider various factors.)#J-18808-Ljbffr

• 

• Government Careers