CITY OF RIVERSIDE, CA
Riverside, CA, United States
The Position The City of Riverside is accepting applications for the position of Senior Wastewater Plant Electrical & Instrument Technician to fill one (1) vacancy in the Sewer - Electrical & Instrument Division of the Public Works Department . The eligibility list established may be used to fill the current and/or upcoming vacancies within this classification for up to six (6) months. The ideal candidate(s) will have experience in process controls such as maintaining and repairing complex electrical and electronic operational controls, recording, alarm systems and variable speed pump control equipment. Additionally, the best candidate(s) will have experience in the maintenance, repair, and troubleshooting of PLCs throughout the plant and collections lift station system network. Finally, the top candidate will have experience in analytical equipment such as residual, D.O., PH, conductivity, and turbidity and like equipment. The Senior Wastewater Plant Electrical & Instrument Technician, under general supervision, will supervise staff and participate in training and the performance of skilled electrical and instrumentation work in the Electrical/Instrumentation Group, PM maintenance, repair, and calibration of automatic and manual controls, including alarm systems and equipment; and perform related work as required. Work Performed Typical duties may include, but are not limited to, the following: Supervise and participate in troubleshooting problems in electrical and instrumentation systems; reading and interpreting blueprints, wiring diagrams and schematics; and utilizing a variety of test equipment. Supervise and participate in the testing, cleaning, repairing, rebuilding, and calibrating metering equipment. Supervise and participate in the testing, cleaning, repairing, calibrating, and reprogramming of (PLC's) and instrumentation systems and equipment. Supervise and participate in the maintenance, repair, and balance of electronic systems for variable speed pump controls. Supervise and participate in the maintenance and repair of electrical and electronic operational control, recording and alarm systems and equipment. Qualifications Recruitment Guidelines: Education: High school graduation or satisfactory equivalent (GED) supplemented by completion of a certificate program in electronics. Experience: Five years of experience in electrical or electronic instrumentation system installation, maintenance, and repair, preferably involving water or wastewater plant treatment processes. Necessary Special Requirement Possession of an appropriate, valid class "C" California Motor Vehicle Operator's License. Possession of a California Water Environment Association (CWEA) Electrical & Instrumentation Technologist Grade II Certificate. Possession of a California Water Environment Association (CWEA) Electrical & Instrumentation Technologist Grade III Certificate within 12 months of appointment. Highly Desirable Qualification(s): Experience in Process Controls Experience in Analytical Equipment Selection Process DOCUMENTS REQUIRED AT THE TIME OF APPLICATION: 1) Completed Employment Application 2) Completed Supplemental Questionnaire PLEASE NOTE: FOR DIRECTIONS ON ATTACHING A DOCUMENT TO AN ON-LINE APPLICATION, OR GENERAL INFORMATION ON COMPLETING YOUR ON-LINE APPLICATION, CLICK HERE: (Application Guide). IMPORTANT INFORMATION ON SCHEDULING ASSESSMENTS: If you are selected to move forward in the assessment process, you may be required to self-schedule your appointment. You will be notified via email of your status and provided with self-scheduling instructions. Please check your email regularly following the closing date of this recruitment. The selection process will begin with an employment application package screening, with the best qualified candidates being invited to participate further in the assessment process. This process may include any combination of written, performance, and oral assessments to evaluate job-related education, experience, knowledge, skills, and abilities. Those who successfully complete the selection process will be placed on the eligibility list for this classification. It is the responsibility of candidates with a disability requiring accommodation in the assessment process to contact the Human Resources Department in writing to request such accommodation prior to the closing date of this recruitment. Appointment may be subject to the successful completion of a pre-employment background investigation, drug screen, and/or medical/physical examination. NOTE : The City reserves the right to modify selection devices and test instruments in accordance with accepted legal, ethical, and professional standards. Candidates may reapply when there is a posting to establish an eligibility list. EDUCATIONAL REQUIREMENTS: Proof of education listed in your application will be requested at the time of conditional offer. Acceptable documentation consists of transcripts or degree, if applicable, by the accredited U.S. college or university. Education obtained outside the United States (US) require one of the following options: An equivalency statement from an evaluation company certified by the National Association of Credential Evaluation Services (NACES) at http://www.naces.org/members.html or the Association of International Credential Evaluators Inc. (AICE) at http://aice-eval.org/members/ . An advanced-level degree from an accredited US college or university. All applicants will be notified via e-mail or telephone of their application status and the assessment dates/times/locations after the closing date of this announcement. THE PROVISIONS OF THIS JOB ANNOUNCEMENT DO NOT CONSTITUTE AN EXPRESSED OR IMPLIED CONTRACT.
The Position The City of Riverside is accepting applications for the position of Senior Wastewater Plant Electrical & Instrument Technician to fill one (1) vacancy in the Sewer - Electrical & Instrument Division of the Public Works Department . The eligibility list established may be used to fill the current and/or upcoming vacancies within this classification for up to six (6) months. The ideal candidate(s) will have experience in process controls such as maintaining and repairing complex electrical and electronic operational controls, recording, alarm systems and variable speed pump control equipment. Additionally, the best candidate(s) will have experience in the maintenance, repair, and troubleshooting of PLCs throughout the plant and collections lift station system network. Finally, the top candidate will have experience in analytical equipment such as residual, D.O., PH, conductivity, and turbidity and like equipment. The Senior Wastewater Plant Electrical & Instrument Technician, under general supervision, will supervise staff and participate in training and the performance of skilled electrical and instrumentation work in the Electrical/Instrumentation Group, PM maintenance, repair, and calibration of automatic and manual controls, including alarm systems and equipment; and perform related work as required. Work Performed Typical duties may include, but are not limited to, the following: Supervise and participate in troubleshooting problems in electrical and instrumentation systems; reading and interpreting blueprints, wiring diagrams and schematics; and utilizing a variety of test equipment. Supervise and participate in the testing, cleaning, repairing, rebuilding, and calibrating metering equipment. Supervise and participate in the testing, cleaning, repairing, calibrating, and reprogramming of (PLC's) and instrumentation systems and equipment. Supervise and participate in the maintenance, repair, and balance of electronic systems for variable speed pump controls. Supervise and participate in the maintenance and repair of electrical and electronic operational control, recording and alarm systems and equipment. Qualifications Recruitment Guidelines: Education: High school graduation or satisfactory equivalent (GED) supplemented by completion of a certificate program in electronics. Experience: Five years of experience in electrical or electronic instrumentation system installation, maintenance, and repair, preferably involving water or wastewater plant treatment processes. Necessary Special Requirement Possession of an appropriate, valid class "C" California Motor Vehicle Operator's License. Possession of a California Water Environment Association (CWEA) Electrical & Instrumentation Technologist Grade II Certificate. Possession of a California Water Environment Association (CWEA) Electrical & Instrumentation Technologist Grade III Certificate within 12 months of appointment. Highly Desirable Qualification(s): Experience in Process Controls Experience in Analytical Equipment Selection Process DOCUMENTS REQUIRED AT THE TIME OF APPLICATION: 1) Completed Employment Application 2) Completed Supplemental Questionnaire PLEASE NOTE: FOR DIRECTIONS ON ATTACHING A DOCUMENT TO AN ON-LINE APPLICATION, OR GENERAL INFORMATION ON COMPLETING YOUR ON-LINE APPLICATION, CLICK HERE: (Application Guide). IMPORTANT INFORMATION ON SCHEDULING ASSESSMENTS: If you are selected to move forward in the assessment process, you may be required to self-schedule your appointment. You will be notified via email of your status and provided with self-scheduling instructions. Please check your email regularly following the closing date of this recruitment. The selection process will begin with an employment application package screening, with the best qualified candidates being invited to participate further in the assessment process. This process may include any combination of written, performance, and oral assessments to evaluate job-related education, experience, knowledge, skills, and abilities. Those who successfully complete the selection process will be placed on the eligibility list for this classification. It is the responsibility of candidates with a disability requiring accommodation in the assessment process to contact the Human Resources Department in writing to request such accommodation prior to the closing date of this recruitment. Appointment may be subject to the successful completion of a pre-employment background investigation, drug screen, and/or medical/physical examination. NOTE : The City reserves the right to modify selection devices and test instruments in accordance with accepted legal, ethical, and professional standards. Candidates may reapply when there is a posting to establish an eligibility list. EDUCATIONAL REQUIREMENTS: Proof of education listed in your application will be requested at the time of conditional offer. Acceptable documentation consists of transcripts or degree, if applicable, by the accredited U.S. college or university. Education obtained outside the United States (US) require one of the following options: An equivalency statement from an evaluation company certified by the National Association of Credential Evaluation Services (NACES) at http://www.naces.org/members.html or the Association of International Credential Evaluators Inc. (AICE) at http://aice-eval.org/members/ . An advanced-level degree from an accredited US college or university. All applicants will be notified via e-mail or telephone of their application status and the assessment dates/times/locations after the closing date of this announcement. THE PROVISIONS OF THIS JOB ANNOUNCEMENT DO NOT CONSTITUTE AN EXPRESSED OR IMPLIED CONTRACT.
City of Portland, Oregon
Portland, Oregon, United States
The Position Job Appointment: Full-Time Work Schedule: Monday - Friday, 8 am-5 pm. An alternate schedule may be available. Work Location: 5001 N COLUMBIA BLVD, PORTLAND OR 97203-2098 Benefits: Please check our benefit tab for an overview of benefits for this position. Union Representation: District Council of Trade Unions (DCTU). To view labor agreements, current and future, please visit the Current City Labor Agreements page. Language Pay Premium Eligible: This position may be eligible for Language Pay Differential for qualifying employees. Application Material: Please click APPLY to submit your application via the City of Portland’s online portal. You will need to attach a resume and cover letter. About the Position: The City of Portland Bureau of Environmental Services (BES) Operations & Maintenance Group (O&MG) A core aspect of the Bureau of Environmental Services’ work is in operating and maintaining the sewer piping network and treatment system to meet NPDES Permit compliance. Within the Operations and Maintenance Group Wastewater Pumping and Treatment Maintenance Division, this critical work includes installing, maintaining and repairing mechanical, electrical, automation, and instrumentation equipment at two large, complex wastewater treatment plants, 98 pump stations located throughout the City as well as the combined sewer overflow system. Instrument Techs operate at a journeyman level to safely install, maintain, document and repair electrical instrument systems. Cost-effective decisions regarding proper equipment installation, troubleshooting and modifications required are common and are key elements to the success of the technician’s ability to meet project schedules and keep process areas functioning as designed. Process areas must be operational in order to meet the City's discharge permit requirements. Instrument Tech duties include performing preventive and predictive maintenance on various types of instrumentation system to maintain reliability and meet permit requirements. To meet facility operational requirements, they install new equipment, respond to issues, troubleshoot and repair a variety of industrial instruments and precision process control systems. In addition, they participate in a call-out duty rotation for after-hours response. BES encourages applications from candidates with knowledge, ability and experience working with a broad range of individuals and communities with diverse racial, ethnic and socio-economic backgrounds. What y ou’ll get to do: Sets up, installs, repairs, and calibrates various analytical, instrumentation, controls, and communication equipment; interprets and works from plans and/or develops sketches or designs for work, as appropriate. Performs a variety of programming, diagnostic, analytical, and documentation work involving programmable controllers and graphical-user (human-machine) interfaces for a variety of equipment, including but not limited to programmable logic controllers (PLCs), control panels, communication panels, distributed control systems, and pneumatic/hydraulic/instrumentation panels; research information as necessary to perform duties and maintain currency. Maintains existing process measurement and control instrumentation equipment and systems and related transmitting equipment and systems to ensure proper operation and service; performs preventive maintenance, service and repairs; inspects and tests equipment and systems; locates, reviews, reformats, converts and downloads existing control system programs; reconfigures the programs to accommodate system upgrades and other environmental changes; documents work. Designs, upgrades, installs, connects and tests new and repaired control and monitoring systems. Creates supporting documentation, i.e. P&IDs, loop drawings per ISA Standards. Creates new program database reports; downloads and manipulates data using standard office suite and drawing software. Reviews designs and the work of contractors to ensure safety and compliance with specifications and standards, evaluates and assesses the safety, operability, and condition of systems; ensures that repairs and installations operate properly. Maintains records, supplies and equipment; determines materials needed. Works with others to ensure quality customer service. As assigned, may train, guide and lead the work of others. Is responsible for appropriate safety precautions, i.e. lockout tagout, confined space entry. May be required to provide work review when acting as a lead. Designs, fabricates (exclusive of welding), installs and/or retrofits instrument stands, brackets, supports and panels that are intended for instruments, and related equipment. Designs, fabricates, installs and/or retrofits piping and tubing intended for but not restricted to instrument air, sample analysis, instrument hydraulics, signal/control, stilling wells, and related instrument systems. Performs related duties as assigned. About the Bureau of Environmental Services This is an exciting time to join the Bureau of Environmental Services (BES). Collectively we are re-imagining the work we do to ensure it aligns with Our Values: We implement equity in our workplace, business practices, and service delivery. We value our customers and partners. We carefully manage our watersheds, wastewater and stormwater infrastructure, and financial resources. We encourage leadership among our employees in our City and community. We support a diverse, collaborative, healthy, and engaged workforce. We urge respectful communication and transparency. We advance innovative, sustainable, and resilient solutions. At BES, we value our customers and partners; Portlanders’ sense of connection to their waterways; conscientious stewardship of our watersheds, wastewater and stormwater infrastructure, and financial resources; a diverse, collaborative, healthy, and engaged workforce; leadership among our employees and in our City and community; equity in our workplace, business practices, and service delivery; clear communication and transparency; innovative, sustainable, and resilient solutions. BES is seeking talented individuals from diverse racial, ethnic, and socio-economic backgrounds with knowledge, ability, and experience working with a broad range of individuals and communities; and that desire to work collaboratively and creatively to broaden the variety of innovative ways to partner with and serve all Portland communities. To learn more about the work we do at BES, click on the link: www.portlandoregon.gov/bes/ Our BES 10-Year Strategic Plan can be found here: https://www.portlandoregon.gov/bes/75720 Questions?: Terrol Johnson Senior Recruiter terrol.johnson@portlandoregon.gov To Qualify Applicants should specifically address and demonstrate in their cover letter and resume how their education, training, and/or experience meet each of the following minimum qualifications: Knowledge of tools, materials, processes, and techniques of precision instruments, process control equipment, and electronics including troubleshooting techniques.Skill in repairing, troubleshooting, maintaining, modifying, and installing precision instruments and process control equipment; maintaining, developing, and troubleshooting networking as well as other electronic equipment, electronics, and communications devices. Although not required, please also include experience with SCADA systems.Ability to perform layout and sketch designs for process control installations, modifications, and repairs.Ability to communicate effectively and establish and maintain effective working relationships and work constructively as part of a team and independently. Applicants must also possess: A State of Oregon Limited Maintenance Electrical license within six months of the time of hire. (A higher level/broader electrical license may be substituted) A valid state driver's license and acceptable driving record at the time of hire. The Recruitment Process STEP 1: Apply online between March 4 , 2024 - Open Continuous Required Application Materials: Resume Cover Letter Optional Application Materials: Veteran documents to request for Veteran Preference (ex, DD214-Member 4, VA Benefit Letter, etc.) Application Tips: Your cover letter should include details describing your education, training and/or experience, and where obtained, which clearly reflects your qualifications for each of the numbered items in the "To Qualify" section of this announcement. Your resume should support the details described in your cover letter. Salary Range/Equity Pay Analysis : Please note per the Oregon State Pay Equity Law your salary is determined based on the experience and education listed in your resume/application. It is strongly encouraged to include any transferable experience (paid or unpaid regardless of how recent) to ensure your offer is reflective of all directly related and equivalent experience. Do not attach materials not requested. All completed applications for this position must be submitted no later than on the closing date and time of this recruitment. All applications must be submitted via the City's online application process. E-mailed and/or faxed applications will not be accepted. Step 2: Minimum Qualification Evaluation: Week of April 1, 2024 An evaluation of each applicant's training and paid and unpaid experience, as demonstrated in their resume and cover letter, weighted 100%. Your resume and cover letter will be the basis for our evaluation of your qualifications for this position. Incomplete or inappropriate information may result in disqualification. You have 14 days from the notice of the minimum qualification evaluation results to let us know if you like to review and discuss your evaluation result. Please read the City of Portland Administrative Rule 3.01 for complete information. Additional evaluation may be required prior to the establishment of the eligible list and/or final selection. Step 3: Establishment of Eligible List: Week of April 8, 2024 Candidates who meet the minimum qualifications will be placed on the equally ranked eligible list. Step 4: Selection (Interview): TBD The hiring bureau will review and select candidates to interview. Please note, that the selection process may take up to 90 days from the notification of being placed on the eligible list. Step 5: Offer of Employment: TBD Step 6: Start Date: TBD A start date will be determined after all conditions of employment have been met. *Timeline is approximate and subject to change* Additional Information Click here for additional information regarding the following: City of Portland Core Values Recruitment Process - Work Status Equal Employment Opportunity Veteran Preference ADA, Pregnancy, and Religious Accommodations An Equal Opportunity / Affirmative Action Employer A Career with the City of Portland offers many Employee Benefits We offer a comprehensive benefits package, including but not limited to Health Care (Medical, Vision and Dental) Carrot Fertility Wellness Benefits Life Insurance Short- and Long-term disability coverage to eligible employees and their families. Employee Assistance Plan Flexible Spending Accounts Retirement Oregon Public Employees Retirement System (PERS), including contributions to the PERS IAP plan paid by employer Family Medical Leave City Paid Parental Leave AND SO MANY MORE! Benefits may vary depending on bargaining unit and employment status. Click here to review the many different benefits the City of Portland offers . Closing Date/Time: 6/3/2024 11:59 PM Pacific
The Position Job Appointment: Full-Time Work Schedule: Monday - Friday, 8 am-5 pm. An alternate schedule may be available. Work Location: 5001 N COLUMBIA BLVD, PORTLAND OR 97203-2098 Benefits: Please check our benefit tab for an overview of benefits for this position. Union Representation: District Council of Trade Unions (DCTU). To view labor agreements, current and future, please visit the Current City Labor Agreements page. Language Pay Premium Eligible: This position may be eligible for Language Pay Differential for qualifying employees. Application Material: Please click APPLY to submit your application via the City of Portland’s online portal. You will need to attach a resume and cover letter. About the Position: The City of Portland Bureau of Environmental Services (BES) Operations & Maintenance Group (O&MG) A core aspect of the Bureau of Environmental Services’ work is in operating and maintaining the sewer piping network and treatment system to meet NPDES Permit compliance. Within the Operations and Maintenance Group Wastewater Pumping and Treatment Maintenance Division, this critical work includes installing, maintaining and repairing mechanical, electrical, automation, and instrumentation equipment at two large, complex wastewater treatment plants, 98 pump stations located throughout the City as well as the combined sewer overflow system. Instrument Techs operate at a journeyman level to safely install, maintain, document and repair electrical instrument systems. Cost-effective decisions regarding proper equipment installation, troubleshooting and modifications required are common and are key elements to the success of the technician’s ability to meet project schedules and keep process areas functioning as designed. Process areas must be operational in order to meet the City's discharge permit requirements. Instrument Tech duties include performing preventive and predictive maintenance on various types of instrumentation system to maintain reliability and meet permit requirements. To meet facility operational requirements, they install new equipment, respond to issues, troubleshoot and repair a variety of industrial instruments and precision process control systems. In addition, they participate in a call-out duty rotation for after-hours response. BES encourages applications from candidates with knowledge, ability and experience working with a broad range of individuals and communities with diverse racial, ethnic and socio-economic backgrounds. What y ou’ll get to do: Sets up, installs, repairs, and calibrates various analytical, instrumentation, controls, and communication equipment; interprets and works from plans and/or develops sketches or designs for work, as appropriate. Performs a variety of programming, diagnostic, analytical, and documentation work involving programmable controllers and graphical-user (human-machine) interfaces for a variety of equipment, including but not limited to programmable logic controllers (PLCs), control panels, communication panels, distributed control systems, and pneumatic/hydraulic/instrumentation panels; research information as necessary to perform duties and maintain currency. Maintains existing process measurement and control instrumentation equipment and systems and related transmitting equipment and systems to ensure proper operation and service; performs preventive maintenance, service and repairs; inspects and tests equipment and systems; locates, reviews, reformats, converts and downloads existing control system programs; reconfigures the programs to accommodate system upgrades and other environmental changes; documents work. Designs, upgrades, installs, connects and tests new and repaired control and monitoring systems. Creates supporting documentation, i.e. P&IDs, loop drawings per ISA Standards. Creates new program database reports; downloads and manipulates data using standard office suite and drawing software. Reviews designs and the work of contractors to ensure safety and compliance with specifications and standards, evaluates and assesses the safety, operability, and condition of systems; ensures that repairs and installations operate properly. Maintains records, supplies and equipment; determines materials needed. Works with others to ensure quality customer service. As assigned, may train, guide and lead the work of others. Is responsible for appropriate safety precautions, i.e. lockout tagout, confined space entry. May be required to provide work review when acting as a lead. Designs, fabricates (exclusive of welding), installs and/or retrofits instrument stands, brackets, supports and panels that are intended for instruments, and related equipment. Designs, fabricates, installs and/or retrofits piping and tubing intended for but not restricted to instrument air, sample analysis, instrument hydraulics, signal/control, stilling wells, and related instrument systems. Performs related duties as assigned. About the Bureau of Environmental Services This is an exciting time to join the Bureau of Environmental Services (BES). Collectively we are re-imagining the work we do to ensure it aligns with Our Values: We implement equity in our workplace, business practices, and service delivery. We value our customers and partners. We carefully manage our watersheds, wastewater and stormwater infrastructure, and financial resources. We encourage leadership among our employees in our City and community. We support a diverse, collaborative, healthy, and engaged workforce. We urge respectful communication and transparency. We advance innovative, sustainable, and resilient solutions. At BES, we value our customers and partners; Portlanders’ sense of connection to their waterways; conscientious stewardship of our watersheds, wastewater and stormwater infrastructure, and financial resources; a diverse, collaborative, healthy, and engaged workforce; leadership among our employees and in our City and community; equity in our workplace, business practices, and service delivery; clear communication and transparency; innovative, sustainable, and resilient solutions. BES is seeking talented individuals from diverse racial, ethnic, and socio-economic backgrounds with knowledge, ability, and experience working with a broad range of individuals and communities; and that desire to work collaboratively and creatively to broaden the variety of innovative ways to partner with and serve all Portland communities. To learn more about the work we do at BES, click on the link: www.portlandoregon.gov/bes/ Our BES 10-Year Strategic Plan can be found here: https://www.portlandoregon.gov/bes/75720 Questions?: Terrol Johnson Senior Recruiter terrol.johnson@portlandoregon.gov To Qualify Applicants should specifically address and demonstrate in their cover letter and resume how their education, training, and/or experience meet each of the following minimum qualifications: Knowledge of tools, materials, processes, and techniques of precision instruments, process control equipment, and electronics including troubleshooting techniques.Skill in repairing, troubleshooting, maintaining, modifying, and installing precision instruments and process control equipment; maintaining, developing, and troubleshooting networking as well as other electronic equipment, electronics, and communications devices. Although not required, please also include experience with SCADA systems.Ability to perform layout and sketch designs for process control installations, modifications, and repairs.Ability to communicate effectively and establish and maintain effective working relationships and work constructively as part of a team and independently. Applicants must also possess: A State of Oregon Limited Maintenance Electrical license within six months of the time of hire. (A higher level/broader electrical license may be substituted) A valid state driver's license and acceptable driving record at the time of hire. The Recruitment Process STEP 1: Apply online between March 4 , 2024 - Open Continuous Required Application Materials: Resume Cover Letter Optional Application Materials: Veteran documents to request for Veteran Preference (ex, DD214-Member 4, VA Benefit Letter, etc.) Application Tips: Your cover letter should include details describing your education, training and/or experience, and where obtained, which clearly reflects your qualifications for each of the numbered items in the "To Qualify" section of this announcement. Your resume should support the details described in your cover letter. Salary Range/Equity Pay Analysis : Please note per the Oregon State Pay Equity Law your salary is determined based on the experience and education listed in your resume/application. It is strongly encouraged to include any transferable experience (paid or unpaid regardless of how recent) to ensure your offer is reflective of all directly related and equivalent experience. Do not attach materials not requested. All completed applications for this position must be submitted no later than on the closing date and time of this recruitment. All applications must be submitted via the City's online application process. E-mailed and/or faxed applications will not be accepted. Step 2: Minimum Qualification Evaluation: Week of April 1, 2024 An evaluation of each applicant's training and paid and unpaid experience, as demonstrated in their resume and cover letter, weighted 100%. Your resume and cover letter will be the basis for our evaluation of your qualifications for this position. Incomplete or inappropriate information may result in disqualification. You have 14 days from the notice of the minimum qualification evaluation results to let us know if you like to review and discuss your evaluation result. Please read the City of Portland Administrative Rule 3.01 for complete information. Additional evaluation may be required prior to the establishment of the eligible list and/or final selection. Step 3: Establishment of Eligible List: Week of April 8, 2024 Candidates who meet the minimum qualifications will be placed on the equally ranked eligible list. Step 4: Selection (Interview): TBD The hiring bureau will review and select candidates to interview. Please note, that the selection process may take up to 90 days from the notification of being placed on the eligible list. Step 5: Offer of Employment: TBD Step 6: Start Date: TBD A start date will be determined after all conditions of employment have been met. *Timeline is approximate and subject to change* Additional Information Click here for additional information regarding the following: City of Portland Core Values Recruitment Process - Work Status Equal Employment Opportunity Veteran Preference ADA, Pregnancy, and Religious Accommodations An Equal Opportunity / Affirmative Action Employer A Career with the City of Portland offers many Employee Benefits We offer a comprehensive benefits package, including but not limited to Health Care (Medical, Vision and Dental) Carrot Fertility Wellness Benefits Life Insurance Short- and Long-term disability coverage to eligible employees and their families. Employee Assistance Plan Flexible Spending Accounts Retirement Oregon Public Employees Retirement System (PERS), including contributions to the PERS IAP plan paid by employer Family Medical Leave City Paid Parental Leave AND SO MANY MORE! Benefits may vary depending on bargaining unit and employment status. Click here to review the many different benefits the City of Portland offers . Closing Date/Time: 6/3/2024 11:59 PM Pacific
SAN ANTONIO WATER SYSTEM
San Antonio, Texas, United States
Grade 19 - Starting hourly rate: $29.2658. Rate of pay depends on qualifications. Job Description JO B SUMMARY The Senior Control Systems Technician is responsible for the installation, maintenance, programming, commissioning, and troubleshooting of process control systems. Under limited supervision, the Senior Control Systems Technician is responsible for efficiently prioritizing, planning, and completing the workload as assigned. The technician works as part of the instrument and controls team to meet SAWS’ mission statement. The incumbent attends required safety training and follows all safety standards. E SS E N T I A L FUNCTIONS Performs complex maintenance, troubleshooting, calibration, programming, and system administration of Process Control Systems (SCADA and DCS), Programmable Logic Controllers (PLCs), control and instrument loops, field instrumentation, chemical analysis systems, variable frequency drives, communication network systems, hazardous chemical distribution and detection systems, and HMI computer workstations. Performs installation and implementation of process instrumentation, Programmable Logic Controllers ((PLC's), PLC-based control and instrument loops, communication network systems (Serial/IP/Radio), hazardous chemical distribution/detection systems, and chemical analyzer equipment. Ensures proper software application and systems programming necessary for maintaining and troubleshooting PLC’s, HMI, Radio, and other field equipment. Creates, maintains, and updates critical information using various applications and programs. Reviews, and prepares reports from databases with information regarding assigned work orders, equipment calibration, repair, and inventory. Coordinates and facilitates monthly group meetings. Participates in design review and construction process. Reviews prints for conformity to SAWS and accepted industry standards in process control systems and instrumentation principles, practices, procedures, and terminology. Evaluates and specifies instrumentation. Provides technical guidance and training to control system technicians for special projects and PCS control systems. Performs other duties as assigned. DE C I S I O N MAKING The Senior Control Systems Technician works under limited supervision and is expected to take individual initiative in planning and performing work. Coordinates technicians of different trades in order to carry out repair and installation of complex control systems and instrumentation. M INI MU M REQUIREMENTS Associate degree in Instrumentation, Electronics, Industrial Fields or a related field or 60 college hours from an institution accredited by a nationally recognized accredited agency, or a State of Texas Journeyman Electrician License. Three years’ experience in the maintenance, troubleshooting, calibration, repair, and installation of control and instrument loops, field instrumentation, or hazardous chemical distribution/detection systems, including two years’ experience in PLC hardware and software, SCADA/DCS fundamentals. Valid Class “C” Texas Driver’s License. Ability to report to work on time, maintain a good attendance record, and work all designated work schedules. PR EFE R R E D QUALIFICATIONS Instrument Society of America Certification. Cisco certification or approved network certification. Experience in potable and non-potable water industries. Certification that relates to the essential job functions. Work order and maintenance management systems experience. Proficient skills in programming of Programmable Logic Controllers (PLCs) and Human-Machine Interface (HMI) computer workstations. J O B DIMENSIONS Thorough knowledge in communications systems protocols, including hardware and software for wired and wireless network systems. Skill in using desktop business applications, including Excel, Word, PowerPoint, Visio, and Access. Ability to work effectively in both a team and an individual self-directed environment, including coordination with end users, internal and external customers, consultants and vendors. Ability to communicate effectively, verbally and in writing. Ability to work hours other than regular schedule such as days, nights, weekends, holidays, on-call and rotating shifts. Ability to operate a company vehicle on a daily basis. Ability to proficiently utilize laptop computers, oscilloscopes, multi-meters, signal generators, communication service monitors and other calibration equipment. PH Y S I C A L DEMANDS AND WORKING CONDITIONS Physical requirements include, visual acuity, color vision, standing, sitting, walking, climbing, bending, crawling, squatting, kneeling and working in cramped and strained positions for long periods of time, and the ability to lift up to 75 pounds. Working conditions are primarily outside with frequent exposure to inclement weather; wastewater; mechanical, electrical, chemical and confined space hazards; offensive fumes; excessive noise; heavy traffic; deep excavations; animals, snakes and poisonous insects. May be required to comply with requirements as specified in applicable regulations for personal protective equipment, including clearance for use of respiratory protection and other associated equipment. San Antonio Water System values the contributions of all its employees, providing them the best in compensation and benefits. The benefits package is designed to attract and retain a workforce of qualified employees who share a responsibility in providing quality water to 1 million consumers. From an affordable medical and dental plan to life-sustaining retirement and insurance plans, we offer benefits that reward employees for their commitment to a challenging career at SAWS. Employee benefits include the following: Competitive, market-based salaries Performance-based incentives Medical benefits Dental benefits Life insurance Prescription drug program Vision care plan Two retirement plans Deferred compensation plans (457 plan) Disability income Paid leave (vacation, sick, personal) Education assistance program Employee assistance program Flexible, tax-deferred health and dependent care spending accounts Wellness programs On-Site Fitness Facilities Community service opportunities Closing Date/Time: 5/26/2024 11:59 PM Central
Grade 19 - Starting hourly rate: $29.2658. Rate of pay depends on qualifications. Job Description JO B SUMMARY The Senior Control Systems Technician is responsible for the installation, maintenance, programming, commissioning, and troubleshooting of process control systems. Under limited supervision, the Senior Control Systems Technician is responsible for efficiently prioritizing, planning, and completing the workload as assigned. The technician works as part of the instrument and controls team to meet SAWS’ mission statement. The incumbent attends required safety training and follows all safety standards. E SS E N T I A L FUNCTIONS Performs complex maintenance, troubleshooting, calibration, programming, and system administration of Process Control Systems (SCADA and DCS), Programmable Logic Controllers (PLCs), control and instrument loops, field instrumentation, chemical analysis systems, variable frequency drives, communication network systems, hazardous chemical distribution and detection systems, and HMI computer workstations. Performs installation and implementation of process instrumentation, Programmable Logic Controllers ((PLC's), PLC-based control and instrument loops, communication network systems (Serial/IP/Radio), hazardous chemical distribution/detection systems, and chemical analyzer equipment. Ensures proper software application and systems programming necessary for maintaining and troubleshooting PLC’s, HMI, Radio, and other field equipment. Creates, maintains, and updates critical information using various applications and programs. Reviews, and prepares reports from databases with information regarding assigned work orders, equipment calibration, repair, and inventory. Coordinates and facilitates monthly group meetings. Participates in design review and construction process. Reviews prints for conformity to SAWS and accepted industry standards in process control systems and instrumentation principles, practices, procedures, and terminology. Evaluates and specifies instrumentation. Provides technical guidance and training to control system technicians for special projects and PCS control systems. Performs other duties as assigned. DE C I S I O N MAKING The Senior Control Systems Technician works under limited supervision and is expected to take individual initiative in planning and performing work. Coordinates technicians of different trades in order to carry out repair and installation of complex control systems and instrumentation. M INI MU M REQUIREMENTS Associate degree in Instrumentation, Electronics, Industrial Fields or a related field or 60 college hours from an institution accredited by a nationally recognized accredited agency, or a State of Texas Journeyman Electrician License. Three years’ experience in the maintenance, troubleshooting, calibration, repair, and installation of control and instrument loops, field instrumentation, or hazardous chemical distribution/detection systems, including two years’ experience in PLC hardware and software, SCADA/DCS fundamentals. Valid Class “C” Texas Driver’s License. Ability to report to work on time, maintain a good attendance record, and work all designated work schedules. PR EFE R R E D QUALIFICATIONS Instrument Society of America Certification. Cisco certification or approved network certification. Experience in potable and non-potable water industries. Certification that relates to the essential job functions. Work order and maintenance management systems experience. Proficient skills in programming of Programmable Logic Controllers (PLCs) and Human-Machine Interface (HMI) computer workstations. J O B DIMENSIONS Thorough knowledge in communications systems protocols, including hardware and software for wired and wireless network systems. Skill in using desktop business applications, including Excel, Word, PowerPoint, Visio, and Access. Ability to work effectively in both a team and an individual self-directed environment, including coordination with end users, internal and external customers, consultants and vendors. Ability to communicate effectively, verbally and in writing. Ability to work hours other than regular schedule such as days, nights, weekends, holidays, on-call and rotating shifts. Ability to operate a company vehicle on a daily basis. Ability to proficiently utilize laptop computers, oscilloscopes, multi-meters, signal generators, communication service monitors and other calibration equipment. PH Y S I C A L DEMANDS AND WORKING CONDITIONS Physical requirements include, visual acuity, color vision, standing, sitting, walking, climbing, bending, crawling, squatting, kneeling and working in cramped and strained positions for long periods of time, and the ability to lift up to 75 pounds. Working conditions are primarily outside with frequent exposure to inclement weather; wastewater; mechanical, electrical, chemical and confined space hazards; offensive fumes; excessive noise; heavy traffic; deep excavations; animals, snakes and poisonous insects. May be required to comply with requirements as specified in applicable regulations for personal protective equipment, including clearance for use of respiratory protection and other associated equipment. San Antonio Water System values the contributions of all its employees, providing them the best in compensation and benefits. The benefits package is designed to attract and retain a workforce of qualified employees who share a responsibility in providing quality water to 1 million consumers. From an affordable medical and dental plan to life-sustaining retirement and insurance plans, we offer benefits that reward employees for their commitment to a challenging career at SAWS. Employee benefits include the following: Competitive, market-based salaries Performance-based incentives Medical benefits Dental benefits Life insurance Prescription drug program Vision care plan Two retirement plans Deferred compensation plans (457 plan) Disability income Paid leave (vacation, sick, personal) Education assistance program Employee assistance program Flexible, tax-deferred health and dependent care spending accounts Wellness programs On-Site Fitness Facilities Community service opportunities Closing Date/Time: 5/26/2024 11:59 PM Central