Orange County, CA
Orange County, California, United States
CAREER DESCRIPTION COLLISION AUTO BODY TECHNICIAN I (FLEET TECHNICIAN I) SALARY INFORMATION In addition to performance-based merit increases, this position is scheduled to receive salary range increases on the following dates: Effective June 28, 2024 - 4.00% increase Effective June 27, 2025 - 3.75% increase Salary may be negotiable within the range listed above, based on position requirements and successful candidate's qualifications, subject to appropriate authorization. OPEN TO THE PUBLIC This recruitment is being held to establish an open eligible list to fill current and future Fleet Technician I vacancies within OC Public Works. This recruitment may also be used to fill positions in similar and/or lower classifications throughout the County of Orange. DEADLINE TO APPLY Qualified applicants are encouraged to apply immediately, as the recruitment will close on Thursday, June 20, 2024, at 11:59 PM (PST). OC FLEET SERVICES OC Fleet Services (OCFS) is responsible for vehicle life-cycle management, maintenance/repair, and compliance with State and Federal emissions requirements. OCFS provides responsive, cost-effective fleet services to agencies/departments of the County of Orange. They assure safe and properly maintained public fleet vehicles to the internal service customers. OCFS is a service area of OC Public Works. Click here for more information about OC Public Works. Click here for more information about County of Orange THE OPPORTUNITY The County of Orange Public Works has an excellent opportunity for a skilled Collision Auto Body Technician I ( Fleet Technician I) . This position provides vehicle paint and body support to the Sheriff’s Department emergency vehicles, and to all other agency/department vehicles in the County of Orange. OC Public Works is looking for a body shop helper under direction of journeyman level technician(s) to: Straighten and repair automobile and heavy equipment fenders, body panels and metal surfaces; remove dents and welds tears in surfaces; fill rough areas and grind/sand surfaces; repair and fabricate fiberglass parts and surfaces Fine sand and prime coat exterior and interior automobile and equipment surfaces in preparation for finish painting Mix, match and apply paint with a spray gun Build, repair and/or replace wood sideboards and stakes on truck beds Install specialized equipment such as sirens, lights, mounts and brackets including wiring installations Repair or replace door hinges, locks, glass run channels, windows, windshields and allied parts Repair and replace interior trim and upholstery Perform electric arc, acetylene, heliarc, and mig wire feed welding to modify and repair damaged vehicles and equipment Install basic automotive wiring systems. Fabricate modifications to vehicles and equipment from sheet metal to alter original configurations DESIRABLE QUALIFICATIONS AND CORE COMPETENCIES The ideal candidate will possess one (1) year of technical experience or a Certificate of Completion of body shop mechanic instruction from an adult school, vocational school, or specialized industrial program. In addition, the ideal candidate will possess or perform as a helper in the following core competencies: Industry Knowledge Frame and suspension Testing considerations and techniques necessary to ensure the reliability and safety of a vehicle’s frame, chassis and running gear Methods, tools and equipment used in body and fender repair work Methods, tools and equipment and materials used in the painting and finishing of automobiles, trucks and other equipment Repairing or replacing door hinges, locks, glass run channels, window, windshields and align parts Repairing and replacing interior trim and upholstery Performing metal fabrication work, such as sheet metal modifications to vehicles and equipment to alter original configurations Installing basic automotive wiring systems Technical Expertise Install specialized equipment such as sirens, lights, mounts and brackets, including wiring installations Perform body and fender work as a helper level to include repairing, modifying or painting automobiles, trucks and other equipment Set up and operate electric arc, heliarc and acetylene welding equipment in order to accomplish precision welding on various types of metals which are characteristic of automobile repair work Make itemized repair estimates by identifying the cost and parts necessary to repair damaged equipment Set up and operate frame machine with gauges Oral and Written Communication Work independently from written and oral instructions, diagrams, schematics, sketches, specifications and rough drafts Use parts manuals to look up and record information on replacement materials required in body and fender repair work Communicate effectively in writing and orally Complete order forms and other documents correctly Place orders orally in a clear, concise and understandable manner MINIMUM QUALIFICATIONS Click here to view the complete classification description for Fleet Technician I . Education and Experience Certificate of completion of automotive mechanic instruction from an adult school, vocational school, or specialized industrial program. Or One (1) year of journey level technical experience which demonstrates possession of the required knowledge and abilities referenced above. License Required A valid California Class C Driver's License by date of appointment. Special Requirements Incumbents are expected to provide their own hand tools. Physical Requirements Positions in this class typically require: body mobility to stand, stoop, kneel, crouch, squat, push, pull, or crawl; ability to move distances within and between warehouses, offices, and field locations; lift or move up to 50 pounds occasionally, and/or up to 25 pounds of force constantly to move objects; climb stairs and ladders, and work, traverse, and balance atop of the stairs; ability to mount and dismount forklift and/or truck; vision efficient to read up close and at distances over 20 feet, and distinguish colors to identify road signs and signals, read color wire schematics, identify correct ordered parts, and properly identify wire harness color coding; ability to detect, distinguish, and determine odors; requires the ability to speak and hear well enough to communicate clearly and understandably in person to individuals and groups; possess manual dexterity sufficient to use hands, arms, and shoulders repetitively and without limitation to range and motion to operate keyboards, tools, and specialized equipment; ability to drive work vehicles on uneven roads. Environmental and Working Conditions Position assignments include outdoor and indoor field, yards, office settings, and shop locations. Work location shops and field conditions are subject to varying weather conditions, heat variance from an open air work shop and field service locations, and uneven terrain due to equipment location. Incumbents may be exposed to dust and chemicals from equipment being maintained, including paint line stripper, vegetation spray rigs, exhaust fumes from running equipment, gases, and fluids. May be exposed to intense noise levels from the shop, machinery, and equipment. May be required to wear safety equipment, including safety shoes and boots, glasses and face shields, ear plugs and muffs, protective gloves, and rain attire. RECRUITMENT PROCESS Human Resource Services screens all application materials for minimum qualifications. After screening, applicants who meet the minimum qualifications will be referred to the next step in the recruitment process. All applicants will be notified via email of their status in the process. Online Examination (Weighted 100%) Candidates whose work experience appear to best meet the needs of the department will be invited to participate in an examination covering job-related items. Only the candidates who receive the highest score on the assessment will be placed on an eligible list. Based on the Department's needs, the selection procedures listed above may be modified. All candidates will be notified of any changes in the selection procedures. Eligible List Once the assessments have been completed, HRS will establish an eligible list of candidates. Candidates placed on the eligible list may be referred to a selection interview to be considered for present and future vacancies. Veterans Employment Preference (VEPP) The County is committed to providing a mechanism to give preferential consideration in the employment process to veterans and their eligible spouses and will provide eligible participants the opportunity to receive interviews in the selection process for employment and paid internship openings. Please click here ( Download PDF reader ) to review the policy . HOW TO APPLY Only on-line applications will be accepted. Resumes will not be accepted in lieu of on-line applications. Application information must be current, succinct and related to the requirements in this job announcement. Your application should demonstrate your professional experience and education related to the specific qualifications/duties listed in this bulletin, including areas which you have developed expertise. Click here ( Download PDF reader ) for tips to complete your application. ADDITIONAL INFORMATION Please see below for important information regarding COVID-19 related recommendations. Effective April 3, 2023, it is strongly recommended that County employees working in health care settings and correctional facilities follow vaccination and booster guidelines provided by the California Department of Public Health (CDPH) and the Centers for Disease Control and Prevention (CDC). Please click here to see the latest guidance for more details. The position for which you are applying may be required to adhere to any applicable State or County Public Health Orders. You will receive notification of any requirement as it applies to a position. EMAIL NOTIFICATION Email is the primary form of notification during the recruitment process. Please ensure your correct email address is included in our application and use only one email account. NOTE: User accounts are established for one person only and should not be shared with another person. Multiple applications with multiple users may jeopardize your status in the recruitment process for any positions for which you apply. Candidates will be notified regarding their status as the recruitment proceeds via email through the GovernmentJobs.com site. Please check your email folders, including spam/junk folders, and/or accept emails ending with "governmentjobs.com" and "ocgov.com." If your email address should change, please update your profile at www.governmentjobs.com . FREQUENTLY ASKED QUESTIONS Click here for additional Frequently Asked Questions. For specific information pertaining to this recruitment, please contact Brian Quinlan at 714-667-9750 or brian.quinlan@ocpw.ocgov.com EEO INFORMATION Orange County, as an equal employment opportunity employer, encourages applicants from diverse backgrounds to apply. Non-Management Benefits In addition to the County's standard suite of benefits, such as a variety of health plan options, annual leave and paid holidays--we also offer an excellent array of benefits such as a Health Care Reimbursement Account, 457 Defined Contribution Plan and Annual Education and Professional Reimbursement. Employees are provided a Retirement Plan through the Orange County Employees Retirement System (OCERS). Please go to the following link to find out more about Defined Benefit Pensions and OCERS Plan Types/Benefits. http://www.ocers.org/active-member-information Click here for information about benefits offered to County of Orange employees. Closing Date/Time: 6/20/2024 11:59 PM Pacific
CAREER DESCRIPTION COLLISION AUTO BODY TECHNICIAN I (FLEET TECHNICIAN I) SALARY INFORMATION In addition to performance-based merit increases, this position is scheduled to receive salary range increases on the following dates: Effective June 28, 2024 - 4.00% increase Effective June 27, 2025 - 3.75% increase Salary may be negotiable within the range listed above, based on position requirements and successful candidate's qualifications, subject to appropriate authorization. OPEN TO THE PUBLIC This recruitment is being held to establish an open eligible list to fill current and future Fleet Technician I vacancies within OC Public Works. This recruitment may also be used to fill positions in similar and/or lower classifications throughout the County of Orange. DEADLINE TO APPLY Qualified applicants are encouraged to apply immediately, as the recruitment will close on Thursday, June 20, 2024, at 11:59 PM (PST). OC FLEET SERVICES OC Fleet Services (OCFS) is responsible for vehicle life-cycle management, maintenance/repair, and compliance with State and Federal emissions requirements. OCFS provides responsive, cost-effective fleet services to agencies/departments of the County of Orange. They assure safe and properly maintained public fleet vehicles to the internal service customers. OCFS is a service area of OC Public Works. Click here for more information about OC Public Works. Click here for more information about County of Orange THE OPPORTUNITY The County of Orange Public Works has an excellent opportunity for a skilled Collision Auto Body Technician I ( Fleet Technician I) . This position provides vehicle paint and body support to the Sheriff’s Department emergency vehicles, and to all other agency/department vehicles in the County of Orange. OC Public Works is looking for a body shop helper under direction of journeyman level technician(s) to: Straighten and repair automobile and heavy equipment fenders, body panels and metal surfaces; remove dents and welds tears in surfaces; fill rough areas and grind/sand surfaces; repair and fabricate fiberglass parts and surfaces Fine sand and prime coat exterior and interior automobile and equipment surfaces in preparation for finish painting Mix, match and apply paint with a spray gun Build, repair and/or replace wood sideboards and stakes on truck beds Install specialized equipment such as sirens, lights, mounts and brackets including wiring installations Repair or replace door hinges, locks, glass run channels, windows, windshields and allied parts Repair and replace interior trim and upholstery Perform electric arc, acetylene, heliarc, and mig wire feed welding to modify and repair damaged vehicles and equipment Install basic automotive wiring systems. Fabricate modifications to vehicles and equipment from sheet metal to alter original configurations DESIRABLE QUALIFICATIONS AND CORE COMPETENCIES The ideal candidate will possess one (1) year of technical experience or a Certificate of Completion of body shop mechanic instruction from an adult school, vocational school, or specialized industrial program. In addition, the ideal candidate will possess or perform as a helper in the following core competencies: Industry Knowledge Frame and suspension Testing considerations and techniques necessary to ensure the reliability and safety of a vehicle’s frame, chassis and running gear Methods, tools and equipment used in body and fender repair work Methods, tools and equipment and materials used in the painting and finishing of automobiles, trucks and other equipment Repairing or replacing door hinges, locks, glass run channels, window, windshields and align parts Repairing and replacing interior trim and upholstery Performing metal fabrication work, such as sheet metal modifications to vehicles and equipment to alter original configurations Installing basic automotive wiring systems Technical Expertise Install specialized equipment such as sirens, lights, mounts and brackets, including wiring installations Perform body and fender work as a helper level to include repairing, modifying or painting automobiles, trucks and other equipment Set up and operate electric arc, heliarc and acetylene welding equipment in order to accomplish precision welding on various types of metals which are characteristic of automobile repair work Make itemized repair estimates by identifying the cost and parts necessary to repair damaged equipment Set up and operate frame machine with gauges Oral and Written Communication Work independently from written and oral instructions, diagrams, schematics, sketches, specifications and rough drafts Use parts manuals to look up and record information on replacement materials required in body and fender repair work Communicate effectively in writing and orally Complete order forms and other documents correctly Place orders orally in a clear, concise and understandable manner MINIMUM QUALIFICATIONS Click here to view the complete classification description for Fleet Technician I . Education and Experience Certificate of completion of automotive mechanic instruction from an adult school, vocational school, or specialized industrial program. Or One (1) year of journey level technical experience which demonstrates possession of the required knowledge and abilities referenced above. License Required A valid California Class C Driver's License by date of appointment. Special Requirements Incumbents are expected to provide their own hand tools. Physical Requirements Positions in this class typically require: body mobility to stand, stoop, kneel, crouch, squat, push, pull, or crawl; ability to move distances within and between warehouses, offices, and field locations; lift or move up to 50 pounds occasionally, and/or up to 25 pounds of force constantly to move objects; climb stairs and ladders, and work, traverse, and balance atop of the stairs; ability to mount and dismount forklift and/or truck; vision efficient to read up close and at distances over 20 feet, and distinguish colors to identify road signs and signals, read color wire schematics, identify correct ordered parts, and properly identify wire harness color coding; ability to detect, distinguish, and determine odors; requires the ability to speak and hear well enough to communicate clearly and understandably in person to individuals and groups; possess manual dexterity sufficient to use hands, arms, and shoulders repetitively and without limitation to range and motion to operate keyboards, tools, and specialized equipment; ability to drive work vehicles on uneven roads. Environmental and Working Conditions Position assignments include outdoor and indoor field, yards, office settings, and shop locations. Work location shops and field conditions are subject to varying weather conditions, heat variance from an open air work shop and field service locations, and uneven terrain due to equipment location. Incumbents may be exposed to dust and chemicals from equipment being maintained, including paint line stripper, vegetation spray rigs, exhaust fumes from running equipment, gases, and fluids. May be exposed to intense noise levels from the shop, machinery, and equipment. May be required to wear safety equipment, including safety shoes and boots, glasses and face shields, ear plugs and muffs, protective gloves, and rain attire. RECRUITMENT PROCESS Human Resource Services screens all application materials for minimum qualifications. After screening, applicants who meet the minimum qualifications will be referred to the next step in the recruitment process. All applicants will be notified via email of their status in the process. Online Examination (Weighted 100%) Candidates whose work experience appear to best meet the needs of the department will be invited to participate in an examination covering job-related items. Only the candidates who receive the highest score on the assessment will be placed on an eligible list. Based on the Department's needs, the selection procedures listed above may be modified. All candidates will be notified of any changes in the selection procedures. Eligible List Once the assessments have been completed, HRS will establish an eligible list of candidates. Candidates placed on the eligible list may be referred to a selection interview to be considered for present and future vacancies. Veterans Employment Preference (VEPP) The County is committed to providing a mechanism to give preferential consideration in the employment process to veterans and their eligible spouses and will provide eligible participants the opportunity to receive interviews in the selection process for employment and paid internship openings. Please click here ( Download PDF reader ) to review the policy . HOW TO APPLY Only on-line applications will be accepted. Resumes will not be accepted in lieu of on-line applications. Application information must be current, succinct and related to the requirements in this job announcement. Your application should demonstrate your professional experience and education related to the specific qualifications/duties listed in this bulletin, including areas which you have developed expertise. Click here ( Download PDF reader ) for tips to complete your application. ADDITIONAL INFORMATION Please see below for important information regarding COVID-19 related recommendations. Effective April 3, 2023, it is strongly recommended that County employees working in health care settings and correctional facilities follow vaccination and booster guidelines provided by the California Department of Public Health (CDPH) and the Centers for Disease Control and Prevention (CDC). Please click here to see the latest guidance for more details. The position for which you are applying may be required to adhere to any applicable State or County Public Health Orders. You will receive notification of any requirement as it applies to a position. EMAIL NOTIFICATION Email is the primary form of notification during the recruitment process. Please ensure your correct email address is included in our application and use only one email account. NOTE: User accounts are established for one person only and should not be shared with another person. Multiple applications with multiple users may jeopardize your status in the recruitment process for any positions for which you apply. Candidates will be notified regarding their status as the recruitment proceeds via email through the GovernmentJobs.com site. Please check your email folders, including spam/junk folders, and/or accept emails ending with "governmentjobs.com" and "ocgov.com." If your email address should change, please update your profile at www.governmentjobs.com . FREQUENTLY ASKED QUESTIONS Click here for additional Frequently Asked Questions. For specific information pertaining to this recruitment, please contact Brian Quinlan at 714-667-9750 or brian.quinlan@ocpw.ocgov.com EEO INFORMATION Orange County, as an equal employment opportunity employer, encourages applicants from diverse backgrounds to apply. Non-Management Benefits In addition to the County's standard suite of benefits, such as a variety of health plan options, annual leave and paid holidays--we also offer an excellent array of benefits such as a Health Care Reimbursement Account, 457 Defined Contribution Plan and Annual Education and Professional Reimbursement. Employees are provided a Retirement Plan through the Orange County Employees Retirement System (OCERS). Please go to the following link to find out more about Defined Benefit Pensions and OCERS Plan Types/Benefits. http://www.ocers.org/active-member-information Click here for information about benefits offered to County of Orange employees. Closing Date/Time: 6/20/2024 11:59 PM Pacific
City of Kansas City, MO
Kansas City, Missouri, United States
Several full-time positions available with the General Services Department, Fleet Maintenance Division located at 5300 Municipal Salary Range: $22.61-34.48/hour Normal Work Days/Hours: Monday-Friday 7:30 a.m.-4:00 p.m., Monday-Friday 3:30 p.m.-12:00 a.m., Monday-Friday 8:30 a.m.-5:00 p.m., Monday-Thursday 5:00 p.m.-3:30 a.m. Application Deadline Date: Open Until Filled *Employees who hold the exact position title, have successfully completed their 6-month probationary period, and wish to be considered for a lateral transfer into the posted position, must contact the department directly. All others interested must submit an application to be considered for this posted Job Opening. Responsibilities Greases and lubricates automobiles, trucks, street sweepers and other automotive equipment. Services batteries and other parts. Makes minor adjustments and repairs on motor equipment such as tune-ups, tire repairs, brake adjustments, replacing fan and drive belts, radiator hoses and other adjustments. Performs major repair and replacement work including major and minor engine overhaul. Refaces valves and seats, grinds, assembles and makes adjustments. Installs rings and bearings and insures proper clearances. Overhauls and repairs brakes and clutches and rebuilds carburetors. Overhauls and repairs differentials and transmissions. Repairs and/or replaces water pumps and services cooling system. Services heavy road equipment in garage or field locations with gasoline, diesel fuel and oil. Changes oil, oil filters and fuel filters. Makes field service calls to change tires on automotive equipment such as light and heavy trucks, motor graders and tractors. Diagnoses, disassembles, inspects and otherwise services a diversified variety of automotive equipment, tractors, specialized equipment, attachments and mowers of various sizes; makes tests to locate defects in operation and as a check on repairs before returning equipment back into service. Performs minor body repairs, checks alignment of wheels, corrects body rattles, replaces and repairs door regulators and locks. Performs electrical work on automotive electrical wiring systems, such as installing batteries and terminals and correcting other defects. Tests and repairs regulators, alternators, generators and starters, and repairs electrical systems. Welds and does machine work incidental to completion of repair assignments. Utilizes available shop tools and instruments to diagnose and repair equipment as needed. Makes repairs to and adjusts hydraulic control and pumping systems. Keeps garage areas clean. Assists other mechanics in repairs of a complex nature. Picks up parts when necessary. Repairs, overhauls and maintains specialized equipment on pumpers, ladders and other motorized fire equipment such as pumps, hydraulic systems, steering mechanisms, brake, brakes, wiring, plumbing, drive shafts, gear reduction units, transmissions, differentials and diesel and gasoline engine overhaul. Performs operational tests of repaired equipment to certify for return to service. May operate snow removal equipment where required. Performs related work as required. Demonstrates the ability to safely operate and interpret complex diagnostic equipment. Determines the appropriate repair for equipment based on own knowledge and reference materials. Demonstrates the ability to perform calculations using changes in units of measure and in the interpretation of complex gauges and scales. Demonstrates the ability to differentiate between metric and standard units of measure. Performs calculations with liquid flows, pressures and volumes. Qualifications REQUIRES 3 months of semi-skilled experience in automotive repairs; OR an equivalent combination of qualifying education and experience which may include the successful completion of an automotive repair trade school or the successful completion of a vocational technical program in automotive maintenance or completion of the Automotive Service Excellence (ASE) certification as a master automotive/truck technician. Must possess a valid state-issued driver's license in accordance with City of KCMO policies. Must possess a valid MO Class A, B or C CDL as determined by the department prior to the end of the probationary period. Must possess a valid MO Inspector Mechanic permit prior to the end of the probationary period. Must pass a pre-employment drug screen and post-offer physical examination as prescribed by the City. Other Information URGENT!!! CRITICAL RECRUITMENT INFORMATION QUESTIONS REGARDING AVIATION POSITIONS SHOULD BE DIRECTED TO THE AVIATION DEPARTMENT AT 816-243-3010. Applications and/or resumes are evaluated on the information received by the application deadline. Please ensure that your application or resume clearly demonstrates how you meet the minimum qualifications for the position for which you are applying, this includes providing all relevant educational dates and a detailed description of relevant work experience, including months/years of employment. Applications and/or resumes may not be considered if information is incomplete. In order for a resume to be used in lieu of an application the resume must have been submitted online via the City's Applicant Tracking System. Positions requiring a high school diploma/GED certificate must be obtained from a school/program accredited by the Department of Education and recognized by the U.S. Secretary of Education. The minimum education requirement for positions that allow for experience equivalency for an accredited degree is a high school diploma. Unless otherwise specified, an accredited degree must be obtained from a college or university listed with the U.S. Department of Education and recognized by the U.S. Secretary of Education. For positions with a salary grade of EX6 or higher that require an accredited degree, qualifying professional experience must be obtained AFTER the accredited degree is obtained. Successful completion of a pre-employment criminal history/background check is required for all positions. Some positions require a post offer drug screen and/or physical. If appointed, non-residents must obtain residency inside Kansas City, Missouri's city limits within nine months. The City of KCMO is an equal opportunity employer that values diversity and inclusion in the workplace. The City is committed to providing a workplace environment for its employees and citizens free from discrimination based on race, color, sex (including pregnancy), national origin, religion, age, disability, marital status, genetic information, sexual orientation, or gender identity. For more information, please see our EEO Policy The City of KCMO is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please call 816-513-1908 or send an e-mail to accommodations@kcmo.org . If claiming military veterans' preference points, you must attach a copy of your DD-214 or a DD-256 (for reservists). To claim veterans' points you must have served 180 days of regular active duty service and be discharged or released under honorable conditions during peacetimes or 90 days of active duty service, one (1) day during "wartime" and a last discharge or release under honorable conditions. (DOD) 38 U.S. Code • 4211).
Several full-time positions available with the General Services Department, Fleet Maintenance Division located at 5300 Municipal Salary Range: $22.61-34.48/hour Normal Work Days/Hours: Monday-Friday 7:30 a.m.-4:00 p.m., Monday-Friday 3:30 p.m.-12:00 a.m., Monday-Friday 8:30 a.m.-5:00 p.m., Monday-Thursday 5:00 p.m.-3:30 a.m. Application Deadline Date: Open Until Filled *Employees who hold the exact position title, have successfully completed their 6-month probationary period, and wish to be considered for a lateral transfer into the posted position, must contact the department directly. All others interested must submit an application to be considered for this posted Job Opening. Responsibilities Greases and lubricates automobiles, trucks, street sweepers and other automotive equipment. Services batteries and other parts. Makes minor adjustments and repairs on motor equipment such as tune-ups, tire repairs, brake adjustments, replacing fan and drive belts, radiator hoses and other adjustments. Performs major repair and replacement work including major and minor engine overhaul. Refaces valves and seats, grinds, assembles and makes adjustments. Installs rings and bearings and insures proper clearances. Overhauls and repairs brakes and clutches and rebuilds carburetors. Overhauls and repairs differentials and transmissions. Repairs and/or replaces water pumps and services cooling system. Services heavy road equipment in garage or field locations with gasoline, diesel fuel and oil. Changes oil, oil filters and fuel filters. Makes field service calls to change tires on automotive equipment such as light and heavy trucks, motor graders and tractors. Diagnoses, disassembles, inspects and otherwise services a diversified variety of automotive equipment, tractors, specialized equipment, attachments and mowers of various sizes; makes tests to locate defects in operation and as a check on repairs before returning equipment back into service. Performs minor body repairs, checks alignment of wheels, corrects body rattles, replaces and repairs door regulators and locks. Performs electrical work on automotive electrical wiring systems, such as installing batteries and terminals and correcting other defects. Tests and repairs regulators, alternators, generators and starters, and repairs electrical systems. Welds and does machine work incidental to completion of repair assignments. Utilizes available shop tools and instruments to diagnose and repair equipment as needed. Makes repairs to and adjusts hydraulic control and pumping systems. Keeps garage areas clean. Assists other mechanics in repairs of a complex nature. Picks up parts when necessary. Repairs, overhauls and maintains specialized equipment on pumpers, ladders and other motorized fire equipment such as pumps, hydraulic systems, steering mechanisms, brake, brakes, wiring, plumbing, drive shafts, gear reduction units, transmissions, differentials and diesel and gasoline engine overhaul. Performs operational tests of repaired equipment to certify for return to service. May operate snow removal equipment where required. Performs related work as required. Demonstrates the ability to safely operate and interpret complex diagnostic equipment. Determines the appropriate repair for equipment based on own knowledge and reference materials. Demonstrates the ability to perform calculations using changes in units of measure and in the interpretation of complex gauges and scales. Demonstrates the ability to differentiate between metric and standard units of measure. Performs calculations with liquid flows, pressures and volumes. Qualifications REQUIRES 3 months of semi-skilled experience in automotive repairs; OR an equivalent combination of qualifying education and experience which may include the successful completion of an automotive repair trade school or the successful completion of a vocational technical program in automotive maintenance or completion of the Automotive Service Excellence (ASE) certification as a master automotive/truck technician. Must possess a valid state-issued driver's license in accordance with City of KCMO policies. Must possess a valid MO Class A, B or C CDL as determined by the department prior to the end of the probationary period. Must possess a valid MO Inspector Mechanic permit prior to the end of the probationary period. Must pass a pre-employment drug screen and post-offer physical examination as prescribed by the City. Other Information URGENT!!! CRITICAL RECRUITMENT INFORMATION QUESTIONS REGARDING AVIATION POSITIONS SHOULD BE DIRECTED TO THE AVIATION DEPARTMENT AT 816-243-3010. Applications and/or resumes are evaluated on the information received by the application deadline. Please ensure that your application or resume clearly demonstrates how you meet the minimum qualifications for the position for which you are applying, this includes providing all relevant educational dates and a detailed description of relevant work experience, including months/years of employment. Applications and/or resumes may not be considered if information is incomplete. In order for a resume to be used in lieu of an application the resume must have been submitted online via the City's Applicant Tracking System. Positions requiring a high school diploma/GED certificate must be obtained from a school/program accredited by the Department of Education and recognized by the U.S. Secretary of Education. The minimum education requirement for positions that allow for experience equivalency for an accredited degree is a high school diploma. Unless otherwise specified, an accredited degree must be obtained from a college or university listed with the U.S. Department of Education and recognized by the U.S. Secretary of Education. For positions with a salary grade of EX6 or higher that require an accredited degree, qualifying professional experience must be obtained AFTER the accredited degree is obtained. Successful completion of a pre-employment criminal history/background check is required for all positions. Some positions require a post offer drug screen and/or physical. If appointed, non-residents must obtain residency inside Kansas City, Missouri's city limits within nine months. The City of KCMO is an equal opportunity employer that values diversity and inclusion in the workplace. The City is committed to providing a workplace environment for its employees and citizens free from discrimination based on race, color, sex (including pregnancy), national origin, religion, age, disability, marital status, genetic information, sexual orientation, or gender identity. For more information, please see our EEO Policy The City of KCMO is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please call 816-513-1908 or send an e-mail to accommodations@kcmo.org . If claiming military veterans' preference points, you must attach a copy of your DD-214 or a DD-256 (for reservists). To claim veterans' points you must have served 180 days of regular active duty service and be discharged or released under honorable conditions during peacetimes or 90 days of active duty service, one (1) day during "wartime" and a last discharge or release under honorable conditions. (DOD) 38 U.S. Code • 4211).